summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
diff options
context:
space:
mode:
Diffstat (limited to 'linux/drivers/media/video')
-rw-r--r--linux/drivers/media/video/Kconfig123
-rw-r--r--linux/drivers/media/video/au0828/Kconfig1
-rw-r--r--linux/drivers/media/video/au0828/au0828-cards.c7
-rw-r--r--linux/drivers/media/video/au0828/au0828-cards.h1
-rw-r--r--linux/drivers/media/video/au0828/au0828-dvb.c21
5 files changed, 90 insertions, 63 deletions
diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig
index d4a6e56a7..d6b1a106a 100644
--- a/linux/drivers/media/video/Kconfig
+++ b/linux/drivers/media/video/Kconfig
@@ -630,7 +630,7 @@ config VIDEO_ZORAN_ZR36060
depends on VIDEO_ZORAN
help
Say Y to support Zoran boards based on 36060 chips.
- This includes Iomega Bus, Pinnacle DC10, Linux media Labs 33
+ This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33
and 33 R10 and AverMedia 6 boards.
config VIDEO_ZORAN_BUZ
@@ -784,6 +784,64 @@ config VIDEO_CAFE_CCIC
CMOS camera controller. This is the controller found on first-
generation OLPC systems.
+config SOC_CAMERA
+ tristate "SoC camera support"
+ depends on VIDEO_V4L2 && HAS_DMA
+ select VIDEOBUF_GEN
+ help
+ SoC Camera is a common API to several cameras, not connecting
+ over a bus like PCI or USB. For example some i2c camera connected
+ directly to the data bus of an SoC.
+
+config SOC_CAMERA_MT9M001
+ tristate "mt9m001 support"
+ depends on SOC_CAMERA && I2C
+ select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
+ help
+ This driver supports MT9M001 cameras from Micron, monochrome
+ and colour models.
+
+config MT9M001_PCA9536_SWITCH
+ bool "pca9536 datawidth switch for mt9m001"
+ depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
+ help
+ Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
+ extender to switch between 8 and 10 bit datawidth modes
+
+config SOC_CAMERA_MT9V022
+ tristate "mt9v022 support"
+ depends on SOC_CAMERA && I2C
+ select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
+ help
+ This driver supports MT9V022 cameras from Micron
+
+config MT9V022_PCA9536_SWITCH
+ bool "pca9536 datawidth switch for mt9v022"
+ depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
+ help
+ Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
+ extender to switch between 8 and 10 bit datawidth modes
+
+config SOC_CAMERA_PLATFORM
+ tristate "platform camera support"
+ depends on SOC_CAMERA
+ help
+ This is a generic SoC camera platform driver, useful for testing
+
+config VIDEO_PXA27x
+ tristate "PXA27x Quick Capture Interface driver"
+ depends on VIDEO_DEV && PXA27x && SOC_CAMERA
+ select VIDEOBUF_DMA_SG
+ ---help---
+ This is a v4l2 driver for the PXA27x Quick Capture Interface
+
+config VIDEO_SH_MOBILE_CEU
+ tristate "SuperH Mobile CEU Interface driver"
+ depends on VIDEO_DEV && SOC_CAMERA
+ select VIDEOBUF_DMA_CONTIG
+ ---help---
+ This is a v4l2 driver for the SuperH Mobile CEU Interface
+
#
# USB Multimedia device configuration
#
@@ -822,8 +880,7 @@ config VIDEO_OVCAMCHIP
config USB_W9968CF
tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on VIDEO_V4L1 && I2C
- select VIDEO_OVCAMCHIP
+ depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
---help---
Say Y here if you want support for cameras based on OV681 or
Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
@@ -914,64 +971,4 @@ config USB_S2255
endif # V4L_USB_DRIVERS
-config SOC_CAMERA
- tristate "SoC camera support"
- depends on VIDEO_V4L2 && HAS_DMA
- select VIDEOBUF_GEN
- help
- SoC Camera is a common API to several cameras, not connecting
- over a bus like PCI or USB. For example some i2c camera connected
- directly to the data bus of an SoC.
-
-config SOC_CAMERA_MT9M001
- tristate "mt9m001 support"
- depends on SOC_CAMERA && I2C
- select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
- help
- This driver supports MT9M001 cameras from Micron, monochrome
- and colour models.
-
-config MT9M001_PCA9536_SWITCH
- bool "pca9536 datawidth switch for mt9m001"
- depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
- help
- Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
- extender to switch between 8 and 10 bit datawidth modes
-
-config SOC_CAMERA_MT9V022
- tristate "mt9v022 support"
- depends on SOC_CAMERA && I2C
- select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
- help
- This driver supports MT9V022 cameras from Micron
-
-config MT9V022_PCA9536_SWITCH
- bool "pca9536 datawidth switch for mt9v022"
- depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
- help
- Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
- extender to switch between 8 and 10 bit datawidth modes
-
-config SOC_CAMERA_PLATFORM
- tristate "platform camera support"
- depends on SOC_CAMERA
- help
- This is a generic SoC camera platform driver, useful for testing
-
-config VIDEO_PXA27x
- tristate "PXA27x Quick Capture Interface driver"
- depends on VIDEO_DEV && PXA27x
- select SOC_CAMERA
- select VIDEOBUF_DMA_SG
- ---help---
- This is a v4l2 driver for the PXA27x Quick Capture Interface
-
-config VIDEO_SH_MOBILE_CEU
- tristate "SuperH Mobile CEU Interface driver"
- depends on VIDEO_DEV
- select SOC_CAMERA
- select VIDEOBUF_DMA_CONTIG
- ---help---
- This is a v4l2 driver for the SuperH Mobile CEU Interface
-
endif # VIDEO_CAPTURE_DRIVERS
diff --git a/linux/drivers/media/video/au0828/Kconfig b/linux/drivers/media/video/au0828/Kconfig
index ed9a50f18..018f72b8e 100644
--- a/linux/drivers/media/video/au0828/Kconfig
+++ b/linux/drivers/media/video/au0828/Kconfig
@@ -7,6 +7,7 @@ config VIDEO_AU0828
select DVB_AU8522 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE
+ select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
---help---
This is a video4linux driver for Auvitek's USB device.
diff --git a/linux/drivers/media/video/au0828/au0828-cards.c b/linux/drivers/media/video/au0828/au0828-cards.c
index 443e59009..14b9fc9bb 100644
--- a/linux/drivers/media/video/au0828/au0828-cards.c
+++ b/linux/drivers/media/video/au0828/au0828-cards.c
@@ -38,6 +38,9 @@ struct au0828_board au0828_boards[] = {
[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
.name = "DViCO FusionHDTV USB",
},
+ [AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
+ .name = "Hauppauge Woodbury",
+ },
};
/* Tuner callback function for au0828 boards. Currently only needed
@@ -115,6 +118,7 @@ void au0828_card_setup(struct au0828_dev *dev)
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+ case AU0828_BOARD_HAUPPAUGE_WOODBURY:
if (dev->i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xa0);
break;
@@ -134,6 +138,7 @@ void au0828_gpio_setup(struct au0828_dev *dev)
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+ case AU0828_BOARD_HAUPPAUGE_WOODBURY:
/* GPIO's
* 4 - CS5340
* 5 - AU8522 Demodulator
@@ -205,6 +210,8 @@ struct usb_device_id au0828_usb_id_table [] = {
.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
{ USB_DEVICE(0x2040, 0x7281),
.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+ { USB_DEVICE(0x2040, 0x8200),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
{ },
};
diff --git a/linux/drivers/media/video/au0828/au0828-cards.h b/linux/drivers/media/video/au0828/au0828-cards.h
index c37f5fd0f..102ed03dc 100644
--- a/linux/drivers/media/video/au0828/au0828-cards.h
+++ b/linux/drivers/media/video/au0828/au0828-cards.h
@@ -24,3 +24,4 @@
#define AU0828_BOARD_HAUPPAUGE_HVR850 2
#define AU0828_BOARD_DVICO_FUSIONHDTV7 3
#define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL 4
+#define AU0828_BOARD_HAUPPAUGE_WOODBURY 5
diff --git a/linux/drivers/media/video/au0828/au0828-dvb.c b/linux/drivers/media/video/au0828/au0828-dvb.c
index 4c1dfdd8d..b7b0591ef 100644
--- a/linux/drivers/media/video/au0828/au0828-dvb.c
+++ b/linux/drivers/media/video/au0828/au0828-dvb.c
@@ -30,6 +30,7 @@
#include "au8522.h"
#include "xc5000.h"
#include "mxl5007t.h"
+#include "tda18271.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
@@ -41,6 +42,13 @@ static struct au8522_config hauppauge_hvr950q_config = {
.status_mode = AU8522_DEMODLOCKING,
};
+static struct au8522_config hauppauge_woodbury_config = {
+ .demod_address = 0x8e >> 1,
+ .status_mode = AU8522_DEMODLOCKING,
+ .qam_if = AU8522_IF_4MHZ,
+ .vsb_if = AU8522_IF_3_25MHZ,
+};
+
static struct xc5000_config hauppauge_hvr950q_tunerconfig = {
.i2c_address = 0x61,
.if_khz = 6000,
@@ -52,6 +60,10 @@ static struct mxl5007t_config mxl5007t_hvr950q_config = {
.if_freq_hz = MxL_IF_6_MHZ,
};
+static struct tda18271_config hauppauge_woodbury_tunerconfig = {
+ .gate = TDA18271_GATE_DIGITAL,
+};
+
/*-------------------------------------------------------------------*/
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19)
static void urb_completion(struct urb *purb, struct pt_regs *regs)
@@ -362,6 +374,15 @@ int au0828_dvb_register(struct au0828_dev *dev)
&dev->i2c_adap, 0x60,
&mxl5007t_hvr950q_config);
break;
+ case AU0828_BOARD_HAUPPAUGE_WOODBURY:
+ dvb->frontend = dvb_attach(au8522_attach,
+ &hauppauge_woodbury_config,
+ &dev->i2c_adap);
+ if (dvb->frontend != NULL)
+ dvb_attach(tda18271_attach, dvb->frontend,
+ 0x60, &dev->i2c_adap,
+ &hauppauge_woodbury_tunerconfig);
+ break;
default:
printk(KERN_WARNING "The frontend of your DVB/ATSC card "
"isn't supported yet\n");
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 08:33:56 +0000