diff options
Diffstat (limited to 'linux/drivers/media')
-rw-r--r-- | linux/drivers/media/dvb/frontends/Kconfig | 6 | ||||
-rw-r--r-- | linux/drivers/media/dvb/frontends/Makefile | 1 | ||||
-rw-r--r-- | linux/drivers/media/dvb/frontends/dvb_dummy_fe.c | 7 | ||||
-rw-r--r-- | linux/drivers/media/dvb/ttpci/budget-ci.c | 4 | ||||
-rw-r--r-- | linux/drivers/media/video/cs5345.c | 2 | ||||
-rw-r--r-- | linux/drivers/media/video/cs53l32a.c | 2 | ||||
-rw-r--r-- | linux/drivers/media/video/cx18/cx18-driver.h | 1 | ||||
-rw-r--r-- | linux/drivers/media/video/cx18/cx18-i2c.c | 2 | ||||
-rw-r--r-- | linux/drivers/media/video/gspca/sonixb.c | 118 | ||||
-rw-r--r-- | linux/drivers/media/video/gspca/spca561.c | 88 | ||||
-rw-r--r-- | linux/drivers/media/video/ivtv/ivtv-driver.h | 1 | ||||
-rw-r--r-- | linux/drivers/media/video/ivtv/ivtv-i2c.c | 2 | ||||
-rw-r--r-- | linux/drivers/media/video/mt9v022.c | 2 | ||||
-rw-r--r-- | linux/drivers/media/video/sn9c102/sn9c102_devtable.h | 8 | ||||
-rw-r--r-- | linux/drivers/media/video/uvc/uvc_driver.c | 4 | ||||
-rw-r--r-- | linux/drivers/media/video/v4l2-dev.c | 7 | ||||
-rw-r--r-- | linux/drivers/media/video/vpx3220.c | 2 |
17 files changed, 185 insertions, 72 deletions
diff --git a/linux/drivers/media/dvb/frontends/Kconfig b/linux/drivers/media/dvb/frontends/Kconfig index 774f5c2a7..e2444f270 100644 --- a/linux/drivers/media/dvb/frontends/Kconfig +++ b/linux/drivers/media/dvb/frontends/Kconfig @@ -392,4 +392,10 @@ config DVB_LGS8GL5 help A DMB-TH tuner module. Say Y when you want to support this frontend. +comment "Tools to develop new frontends" + +config DVB_DUMMY_FE + tristate "Dummy frontend driver" + default n + endmenu diff --git a/linux/drivers/media/dvb/frontends/Makefile b/linux/drivers/media/dvb/frontends/Makefile index 262eaa429..ca24618d5 100644 --- a/linux/drivers/media/dvb/frontends/Makefile +++ b/linux/drivers/media/dvb/frontends/Makefile @@ -49,3 +49,4 @@ obj-$(CONFIG_DVB_AU8522) += au8522.o obj-$(CONFIG_DVB_TDA10048) += tda10048.o obj-$(CONFIG_DVB_S5H1411) += s5h1411.o obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o +obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o diff --git a/linux/drivers/media/dvb/frontends/dvb_dummy_fe.c b/linux/drivers/media/dvb/frontends/dvb_dummy_fe.c index fed09dfb2..cb4d8a3b9 100644 --- a/linux/drivers/media/dvb/frontends/dvb_dummy_fe.c +++ b/linux/drivers/media/dvb/frontends/dvb_dummy_fe.c @@ -75,9 +75,10 @@ static int dvb_dummy_fe_get_frontend(struct dvb_frontend* fe, struct dvb_fronten static int dvb_dummy_fe_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - if (fe->ops->tuner_ops->set_params) { - fe->ops->tuner_ops->set_params(fe, p); - if (fe->ops->i2c_gate_ctrl) fe->ops->i2c_gate_ctrl(fe, 0); + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe, p); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); } return 0; diff --git a/linux/drivers/media/dvb/ttpci/budget-ci.c b/linux/drivers/media/dvb/ttpci/budget-ci.c index 9a81a07f7..0ccc9db6e 100644 --- a/linux/drivers/media/dvb/ttpci/budget-ci.c +++ b/linux/drivers/media/dvb/ttpci/budget-ci.c @@ -34,6 +34,10 @@ #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/input.h> +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 23) +/* Fix compile warning */ +#undef BIT +#endif #include <linux/spinlock.h> #include <media/ir-common.h> diff --git a/linux/drivers/media/video/cs5345.c b/linux/drivers/media/video/cs5345.c index e4c505d2f..decbc5f1f 100644 --- a/linux/drivers/media/video/cs5345.c +++ b/linux/drivers/media/video/cs5345.c @@ -36,7 +36,7 @@ static int debug; module_param(debug, bool, 0644); -MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On"); +MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On"); #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 22) static unsigned short normal_i2c[] = { 0x98 >> 1, I2C_CLIENT_END }; diff --git a/linux/drivers/media/video/cs53l32a.c b/linux/drivers/media/video/cs53l32a.c index f5ea3f4a9..68f31270c 100644 --- a/linux/drivers/media/video/cs53l32a.c +++ b/linux/drivers/media/video/cs53l32a.c @@ -40,7 +40,7 @@ static int debug; module_param(debug, bool, 0644); -MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On"); +MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On"); static unsigned short normal_i2c[] = { 0x22 >> 1, I2C_CLIENT_END }; diff --git a/linux/drivers/media/video/cx18/cx18-driver.h b/linux/drivers/media/video/cx18/cx18-driver.h index 26359897d..7bdd2fcdf 100644 --- a/linux/drivers/media/video/cx18/cx18-driver.h +++ b/linux/drivers/media/video/cx18/cx18-driver.h @@ -38,7 +38,6 @@ #include <linux/i2c-algo-bit.h> #include <linux/list.h> #include <linux/unistd.h> -#include <linux/byteorder/swab.h> #include <linux/pagemap.h> #include <linux/workqueue.h> #include <linux/mutex.h> diff --git a/linux/drivers/media/video/cx18/cx18-i2c.c b/linux/drivers/media/video/cx18/cx18-i2c.c index 64a259405..17d04632d 100644 --- a/linux/drivers/media/video/cx18/cx18-i2c.c +++ b/linux/drivers/media/video/cx18/cx18-i2c.c @@ -27,8 +27,6 @@ #include "cx18-av-core.h" #include "cx18-i2c.h" -#include <media/ir-kbd-i2c.h> - #define CX18_REG_I2C_1_WR 0xf15000 #define CX18_REG_I2C_1_RD 0xf15008 #define CX18_REG_I2C_2_WR 0xf25100 diff --git a/linux/drivers/media/video/gspca/sonixb.c b/linux/drivers/media/video/gspca/sonixb.c index fa1260900..94cc9bb09 100644 --- a/linux/drivers/media/video/gspca/sonixb.c +++ b/linux/drivers/media/video/gspca/sonixb.c @@ -20,6 +20,26 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* Some documentation on known sonixb registers: + +Reg Use +0x10 high nibble red gain low nibble blue gain +0x11 low nibble green gain +0x12 hstart +0x13 vstart +0x15 hsize (hsize = register-value * 16) +0x16 vsize (vsize = register-value * 16) +0x17 bit 0 toggle compression quality (according to sn9c102 driver) +0x18 bit 7 enables compression, bit 4-5 set image down scaling: + 00 scale 1, 01 scale 1/2, 10, scale 1/4 +0x19 high-nibble is sensor clock divider, changes exposure on sensors which + use a clock generated by the bridge. Some sensors have their own clock. +0x1c auto_exposure area (for avg_lum) startx (startx = register-value * 32) +0x1d auto_exposure area (for avg_lum) starty (starty = register-value * 32) +0x1e auto_exposure area (for avg_lum) stopx (hsize = (0x1e - 0x1c) * 32) +0x1f auto_exposure area (for avg_lum) stopy (vsize = (0x1f - 0x1d) * 32) +*/ + #define MODULE_NAME "sonixb" #include "gspca.h" @@ -32,6 +52,7 @@ MODULE_LICENSE("GPL"); struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ atomic_t avg_lum; + int prev_avg_lum; unsigned char gain; unsigned char exposure; @@ -74,10 +95,10 @@ struct sensor_data { /* sensor_data flags */ #define F_GAIN 0x01 /* has gain */ #define F_SIF 0x02 /* sif or vga */ -#define F_RAW 0x04 /* sensor tested ok with raw bayer mode */ /* priv field of struct v4l2_pix_format flags (do not use low nibble!) */ #define MODE_RAW 0x10 /* raw bayer mode */ +#define MODE_REDUCED_SIF 0x20 /* vga mode (320x240 / 160x120) on sif cam */ /* ctrl_dis helper macros */ #define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX)) @@ -231,6 +252,16 @@ static struct v4l2_pix_format vga_mode[] = { .priv = 0}, }; static struct v4l2_pix_format sif_mode[] = { + {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 | MODE_RAW | MODE_REDUCED_SIF}, + {160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120 * 5 / 4, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 | MODE_REDUCED_SIF}, {176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, .bytesperline = 176, .sizeimage = 176 * 144, @@ -241,6 +272,11 @@ static struct v4l2_pix_format sif_mode[] = { .sizeimage = 176 * 144 * 5 / 4, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, + {320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 5 / 4, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 | MODE_REDUCED_SIF}, {352, 288, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, .bytesperline = 352, .sizeimage = 352 * 288 * 5 / 4, @@ -267,7 +303,7 @@ static const __u8 initOv6650[] = { 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b, - 0x10, 0x1d, 0x10, 0x00, 0x06, 0x1f, 0x00 + 0x10, 0x1d, 0x10, 0x02, 0x02, 0x09, 0x07 #else /* old version? */ 0x64, 0x44, 0x28, 0x00, 0x00, 0x00, 0x00, 0x10, @@ -342,7 +378,7 @@ static const __u8 initOv7630[] = { static const __u8 initOv7630_3[] = { 0x44, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0x80, /* r01 .. r08 */ 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, /* r09 .. r10 */ - 0x00, 0x01, 0x01, 0x0a, /* r11 .. r14 */ + 0x00, 0x02, 0x01, 0x0a, /* r11 .. r14 */ 0x28, 0x1e, /* H & V sizes r15 .. r16 */ 0x68, 0x8f, MCK_INIT1, /* r17 .. r19 */ 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c, 0x00, /* r1a .. r20 */ @@ -380,7 +416,7 @@ static const __u8 initPas106[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x01, 0x00, 0x16, 0x12, 0x24, COMP1, MCK_INIT1, - 0x18, 0x10, 0x04, 0x03, 0x11, 0x0c + 0x18, 0x10, 0x02, 0x02, 0x09, 0x07 }; /* compression 0x86 mckinit1 0x2b */ static const __u8 pas106_sensor_init[][8] = { @@ -486,15 +522,14 @@ static const __u8 tas5130_sensor_init[][8] = { struct sensor_data sensor_data[] = { SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0), -SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF|F_RAW, 0, - 0x60), +SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60), SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3, F_GAIN, 0, 0x21), SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ, 0), -SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, F_RAW, +SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0), -SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF|F_RAW, +SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0), SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0), @@ -864,10 +899,6 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->cam_mode = sif_mode; cam->nmodes = ARRAY_SIZE(sif_mode); } - if (!(sensor_data[sd->sensor].flags & F_RAW)) { - cam->cam_mode++; - cam->nmodes--; - } sd->brightness = BRIGHTNESS_DEF; sd->gain = GAIN_DEF; sd->exposure = EXPOSURE_DEF; @@ -894,31 +925,39 @@ static int sd_init(struct gspca_dev *gspca_dev) static void sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + struct cam *cam = &gspca_dev->cam; int mode, l; const __u8 *sn9c10x; - __u8 reg17_19[3]; + __u8 reg12_19[8]; - mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 0x07; + mode = cam->cam_mode[gspca_dev->curr_mode].priv & 0x07; sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge]; l = sensor_data[sd->sensor].bridge_init_size[sd->bridge]; - reg17_19[0] = sn9c10x[0x17 - 1]; - reg17_19[1] = sn9c10x[0x18 - 1] | (mode << 4); - reg17_19[2] = sn9c10x[0x19 - 1]; + memcpy(reg12_19, &sn9c10x[0x12 - 1], 8); + reg12_19[6] = sn9c10x[0x18 - 1] | (mode << 4); /* Special cases where reg 17 and or 19 value depends on mode */ switch (sd->sensor) { case SENSOR_PAS202: - reg17_19[0] = mode ? 0x24 : 0x20; + reg12_19[5] = mode ? 0x24 : 0x20; break; case SENSOR_TAS5130CXX: /* probably not mode specific at all most likely the upper nibble of 0x19 is exposure (clock divider) just as with the tas5110, we need someone to test this. */ - reg17_19[2] = mode ? 0x23 : 0x43; + reg12_19[7] = mode ? 0x23 : 0x43; break; } /* Disable compression when the raw bayer format has been selected */ - if (gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) - reg17_19[1] &= ~0x80; + if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) + reg12_19[6] &= ~0x80; + + /* Vga mode emulation on SIF sensor? */ + if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_REDUCED_SIF) { + reg12_19[0] += 16; /* 0x12: hstart adjust */ + reg12_19[1] += 24; /* 0x13: vstart adjust */ + reg12_19[3] = 320 / 16; /* 0x15: hsize */ + reg12_19[4] = 240 / 16; /* 0x16: vsize */ + } /* reg 0x01 bit 2 video transfert on */ reg_w(gspca_dev, 0x01, &sn9c10x[0x01 - 1], 1); @@ -937,24 +976,24 @@ static void sd_start(struct gspca_dev *gspca_dev) sd->bridge]); /* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */ - reg_w(gspca_dev, 0x15, &sn9c10x[0x15 - 1], 2); + reg_w(gspca_dev, 0x15, ®12_19[3], 2); /* compression register */ - reg_w(gspca_dev, 0x18, ®17_19[1], 1); + reg_w(gspca_dev, 0x18, ®12_19[6], 1); /* H_start */ - reg_w(gspca_dev, 0x12, &sn9c10x[0x12 - 1], 1); + reg_w(gspca_dev, 0x12, ®12_19[0], 1); /* V_START */ - reg_w(gspca_dev, 0x13, &sn9c10x[0x13 - 1], 1); + reg_w(gspca_dev, 0x13, ®12_19[1], 1); /* reset 0x17 SensorClk enable inv Clk 0x60 */ /*fixme: ov7630 [17]=68 8f (+20 if 102)*/ - reg_w(gspca_dev, 0x17, ®17_19[0], 1); + reg_w(gspca_dev, 0x17, ®12_19[5], 1); /*MCKSIZE ->3 */ /*fixme: not ov7630*/ - reg_w(gspca_dev, 0x19, ®17_19[2], 1); + reg_w(gspca_dev, 0x19, ®12_19[7], 1); /* AE_STRX AE_STRY AE_ENDX AE_ENDY */ reg_w(gspca_dev, 0x1c, &sn9c10x[0x1c - 1], 4); /* Enable video transfert */ reg_w(gspca_dev, 0x01, &sn9c10x[0], 1); /* Compression */ - reg_w(gspca_dev, 0x18, ®17_19[1], 2); + reg_w(gspca_dev, 0x18, ®12_19[6], 2); msleep(20); sd->reg11 = -1; @@ -1014,10 +1053,19 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, } else { lum = data[i + 8] + (data[i + 9] << 8); } - if (lum == 0) { + /* When exposure changes midway a frame we + get a lum of 0 in this case drop 2 frames + as the frames directly after an exposure + change have an unstable image. Sometimes lum + *really* is 0 (cam used in low light with + low exposure setting), so do not drop frames + if the previous lum was 0 too. */ + if (lum == 0 && sd->prev_avg_lum != 0) { lum = -1; sd->frames_to_drop = 2; - } + sd->prev_avg_lum = 0; + } else + sd->prev_avg_lum = lum; atomic_set(&sd->avg_lum, lum); if (sd->frames_to_drop) { @@ -1193,10 +1241,10 @@ static const struct sd_desc sd_desc = { static __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)}, /* TAS5110C1B */ + {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)}, /* TAS5110C1B */ #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE - {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)}, - {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)}, - {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)}, + {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)}, /* TAS5110D */ {USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)}, {USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)}, #endif @@ -1212,10 +1260,12 @@ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)}, #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)}, +#endif {USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)}, +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)}, - {USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)}, #endif + {USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)}, {} }; MODULE_DEVICE_TABLE(usb, device_table); diff --git a/linux/drivers/media/video/gspca/spca561.c b/linux/drivers/media/video/gspca/spca561.c index 5fb54e2e2..4cc805c3e 100644 --- a/linux/drivers/media/video/gspca/spca561.c +++ b/linux/drivers/media/video/gspca/spca561.c @@ -38,9 +38,9 @@ struct sd { #define CONTRAST_MAX 0x3fff __u16 exposure; /* rev12a only */ -#define EXPOSURE_MIN 0 +#define EXPOSURE_MIN 1 #define EXPOSURE_DEF 200 -#define EXPOSURE_MAX 762 +#define EXPOSURE_MAX (4095 - 900) /* see set_exposure */ __u8 brightness; /* rev72a only */ #define BRIGHTNESS_MIN 0 @@ -73,7 +73,7 @@ struct sd { #define AG_CNT_START 13 }; -static struct v4l2_pix_format sif_mode[] = { +static struct v4l2_pix_format sif_012a_mode[] = { {160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, .bytesperline = 160, .sizeimage = 160 * 120, @@ -96,6 +96,29 @@ static struct v4l2_pix_format sif_mode[] = { .priv = 0}, }; +static struct v4l2_pix_format sif_072a_mode[] = { + {160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 3}, + {176, 144, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 176, + .sizeimage = 176 * 144, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2}, + {320, 240, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {352, 288, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 352, + .sizeimage = 352 * 288, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0}, +}; + /* * Initialization data * I'm not very sure how to split initialization from open data @@ -560,10 +583,15 @@ static int sd_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; cam->epaddr = 0x01; gspca_dev->nbalt = 7 + 1; /* choose alternate 7 first */ - cam->cam_mode = sif_mode; - cam->nmodes = ARRAY_SIZE(sif_mode); sd->chip_revision = id->driver_info; + if (sd->chip_revision == Rev012A) { + cam->cam_mode = sif_012a_mode; + cam->nmodes = ARRAY_SIZE(sif_012a_mode); + } else { + cam->cam_mode = sif_072a_mode; + cam->nmodes = ARRAY_SIZE(sif_072a_mode); + } sd->brightness = BRIGHTNESS_DEF; sd->contrast = CONTRAST_DEF; sd->white = WHITE_DEF; @@ -634,9 +662,31 @@ static void setexposure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int expo; + int clock_divider; __u8 data[2]; - expo = sd->exposure + 0x20a8; /* from test */ + /* Register 0x8309 controls exposure for the spca561, + the basic exposure setting goes from 1-2047, where 1 is completely + dark and 2047 is very bright. It not only influences exposure but + also the framerate (to allow for longer exposure) from 1 - 300 it + only raises the exposure time then from 300 - 600 it halves the + framerate to be able to further raise the exposure time and for every + 300 more it halves the framerate again. This allows for a maximum + exposure time of circa 0.2 - 0.25 seconds (30 / (2000/3000) fps). + Sometimes this is not enough, the 1-2047 uses bits 0-10, bits 11-12 + configure a divider for the base framerate which us used at the + exposure setting of 1-300. These bits configure the base framerate + according to the following formula: fps = 60 / (value + 2) */ + if (sd->exposure < 2048) { + expo = sd->exposure; + clock_divider = 0; + } else { + /* Add 900 to make the 0 setting of the second part of the + exposure equal to the 2047 setting of the first part. */ + expo = (sd->exposure - 2048) + 900; + clock_divider = 3; + } + expo |= clock_divider << 11; data[0] = expo; data[1] = expo >> 8; reg_w_buf(gspca_dev, 0x8309, data, 2); @@ -666,23 +716,11 @@ static void setautogain(struct gspca_dev *gspca_dev) static void sd_start_12a(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; - int Clck; + int Clck = 0x8a; /* lower 0x8X values lead to fps > 30 */ __u8 Reg8307[] = { 0xaa, 0x00 }; int mode; mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; - switch (mode) { - case 0: - case 1: - Clck = 0x8a; - break; - case 2: - Clck = 0x85; - break; - default: - Clck = 0x83; - break; - } if (mode <= 1) { /* Use compression on 320x240 and above */ reg_w_val(dev, 0x8500, 0x10 | mode); @@ -700,6 +738,7 @@ static void sd_start_12a(struct gspca_dev *gspca_dev) setcontrast(gspca_dev); setwhite(gspca_dev); setautogain(gspca_dev); + setexposure(gspca_dev); } static void sd_start_72a(struct gspca_dev *gspca_dev) { @@ -835,6 +874,8 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, __u8 *data, /* isoc packet */ int len) /* iso packet length */ { + struct sd *sd = (struct sd *) gspca_dev; + switch (data[0]) { case 0: /* start of frame */ frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, @@ -847,8 +888,13 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, frame, data, len); } else { /* raw bayer (with a header, which we skip) */ - data += 20; - len -= 20; + if (sd->chip_revision == Rev012A) { + data += 20; + len -= 20; + } else { + data += 16; + len -= 16; + } gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); } diff --git a/linux/drivers/media/video/ivtv/ivtv-driver.h b/linux/drivers/media/video/ivtv/ivtv-driver.h index 6e0ca223a..80673a3da 100644 --- a/linux/drivers/media/video/ivtv/ivtv-driver.h +++ b/linux/drivers/media/video/ivtv/ivtv-driver.h @@ -49,7 +49,6 @@ #include <linux/i2c-algo-bit.h> #include <linux/list.h> #include <linux/unistd.h> -#include <linux/byteorder/swab.h> #include <linux/pagemap.h> #include <linux/scatterlist.h> #include <linux/workqueue.h> diff --git a/linux/drivers/media/video/ivtv/ivtv-i2c.c b/linux/drivers/media/video/ivtv/ivtv-i2c.c index 1488bc7ce..180f541f0 100644 --- a/linux/drivers/media/video/ivtv/ivtv-i2c.c +++ b/linux/drivers/media/video/ivtv/ivtv-i2c.c @@ -64,8 +64,6 @@ #include "ivtv-gpio.h" #include "ivtv-i2c.h" -#include <media/ir-kbd-i2c.h> - /* i2c implementation for cx23415/6 chip, ivtv project. * Author: Kevin Thayer (nufan_wfk at yahoo.com) */ diff --git a/linux/drivers/media/video/mt9v022.c b/linux/drivers/media/video/mt9v022.c index 0320d006f..bea695a2c 100644 --- a/linux/drivers/media/video/mt9v022.c +++ b/linux/drivers/media/video/mt9v022.c @@ -25,7 +25,7 @@ static char *sensor_type; module_param(sensor_type, charp, S_IRUGO); -MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"\n"); +MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\""); /* mt9v022 selected register addresses */ #define MT9V022_CHIP_VERSION 0x00 diff --git a/linux/drivers/media/video/sn9c102/sn9c102_devtable.h b/linux/drivers/media/video/sn9c102/sn9c102_devtable.h index 85499a3e4..90a401dc3 100644 --- a/linux/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/linux/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -40,8 +40,10 @@ struct sn9c102_device; static const struct usb_device_id sn9c102_id_table[] = { /* SN9C101 and SN9C102 */ +#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x6001, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x6005, BRIDGE_SN9C102), }, +#endif { SN9C102_USB_DEVICE(0x0c45, 0x6007, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), }, @@ -66,17 +68,21 @@ static const struct usb_device_id sn9c102_id_table[] = { { SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x608c, BRIDGE_SN9C103), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), }, CISVF10 */ +#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x608f, BRIDGE_SN9C103), }, +#endif { SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), }, PAS106 */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), }, TAS5130 */ - { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, TAS5130 */ { SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), }, +#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x60b0, BRIDGE_SN9C103), }, +#endif { SN9C102_USB_DEVICE(0x0c45, 0x60b2, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60b3, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60b8, BRIDGE_SN9C103), }, diff --git a/linux/drivers/media/video/uvc/uvc_driver.c b/linux/drivers/media/video/uvc/uvc_driver.c index 4ab4d1ebb..b2482502a 100644 --- a/linux/drivers/media/video/uvc/uvc_driver.c +++ b/linux/drivers/media/video/uvc/uvc_driver.c @@ -1692,10 +1692,12 @@ static int uvc_resume(struct usb_interface *intf) return __uvc_resume(intf, 0); } +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 23) static int uvc_reset_resume(struct usb_interface *intf) { return __uvc_resume(intf, 1); } +#endif /* ------------------------------------------------------------------------ * Driver initialization and cleanup @@ -1971,7 +1973,9 @@ struct uvc_driver uvc_driver = { .disconnect = uvc_disconnect, .suspend = uvc_suspend, .resume = uvc_resume, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 23) .reset_resume = uvc_reset_resume, +#endif .id_table = uvc_ids, .supports_autosuspend = 1, }, diff --git a/linux/drivers/media/video/v4l2-dev.c b/linux/drivers/media/video/v4l2-dev.c index 0d081cb91..a2daea31c 100644 --- a/linux/drivers/media/video/v4l2-dev.c +++ b/linux/drivers/media/video/v4l2-dev.c @@ -111,8 +111,11 @@ static void v4l2_chardev_release(struct kobject *kobj) struct video_device *vfd = container_of(kobj, struct video_device, cdev.kobj); mutex_lock(&videodev_lock); - if (video_device[vfd->minor] != vfd) - panic("videodev: bad release"); + if (video_device[vfd->minor] != vfd) { + mutex_unlock(&videodev_lock); + BUG(); + return; + } /* Free up this device for reuse */ video_device[vfd->minor] = NULL; diff --git a/linux/drivers/media/video/vpx3220.c b/linux/drivers/media/video/vpx3220.c index 989166eec..896af1a12 100644 --- a/linux/drivers/media/video/vpx3220.c +++ b/linux/drivers/media/video/vpx3220.c @@ -24,8 +24,6 @@ #include <linux/types.h> #include <linux/slab.h> -#include <linux/byteorder/swab.h> - #include <asm/io.h> #include <asm/uaccess.h> |