diff options
Diffstat (limited to 'linux/drivers')
40 files changed, 2156 insertions, 207 deletions
diff --git a/linux/drivers/media/dvb/b2c2/Makefile b/linux/drivers/media/dvb/b2c2/Makefile index 7f16c445b..d288a67fb 100644 --- a/linux/drivers/media/dvb/b2c2/Makefile +++ b/linux/drivers/media/dvb/b2c2/Makefile @@ -3,8 +3,10 @@ b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \ flexcop-dma.o obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o +ifdef STV0297_CS2 obj-$(CONFIG_DVB_B2C2_FLEXCOP) += stv0297_cs2.o +endif b2c2-flexcop-pci-objs = flexcop-pci.o obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 630782f88..21af462c0 100644 --- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -11,10 +11,14 @@ #include "mt352.h" #include "nxt200x.h" #include "bcm3510.h" +#ifdef STV0297_CS2 #include "stv0297_cs2.h" +#else +#include "stv0297.h" +#endif #include "mt312.h" #include "lgdt330x.h" -#include "fe_lgh06xf.h" +#include "lg_h06xf.h" #include "dvb-pll.h" /* lnb control */ @@ -398,11 +402,111 @@ int alps_tdee4_stv0297_tuner_set_params (struct dvb_frontend* fe, struct dvb_fro return 0; } +#ifndef STV0297_CS2 +static u8 alps_tdee4_stv0297_inittab[] = { + 0x80, 0x01, + 0x80, 0x00, + 0x81, 0x01, + 0x81, 0x00, + 0x00, 0x09, + 0x01, 0x69, + 0x03, 0x00, + 0x04, 0x00, + 0x07, 0x00, + 0x08, 0x00, + 0x20, 0x00, + 0x21, 0x40, + 0x22, 0x00, + 0x23, 0x00, + 0x24, 0x40, + 0x25, 0x88, + 0x30, 0xff, + 0x31, 0x00, + 0x32, 0xff, + 0x33, 0x00, + 0x34, 0x50, + 0x35, 0x7f, + 0x36, 0x00, + 0x37, 0x20, + 0x38, 0x00, + 0x40, 0x1c, + 0x41, 0xff, + 0x42, 0x29, + 0x43, 0x00, + 0x44, 0xff, + 0x45, 0x00, + 0x46, 0x00, + 0x49, 0x04, + 0x4a, 0x00, + 0x4b, 0xf8, + 0x52, 0x30, + 0x55, 0xae, + 0x56, 0x47, + 0x57, 0xe1, + 0x58, 0x3a, + 0x5a, 0x1e, + 0x5b, 0x34, + 0x60, 0x00, + 0x63, 0x00, + 0x64, 0x00, + 0x65, 0x00, + 0x66, 0x00, + 0x67, 0x00, + 0x68, 0x00, + 0x69, 0x00, + 0x6a, 0x02, + 0x6b, 0x00, + 0x70, 0xff, + 0x71, 0x00, + 0x72, 0x00, + 0x73, 0x00, + 0x74, 0x0c, + 0x80, 0x00, + 0x81, 0x00, + 0x82, 0x00, + 0x83, 0x00, + 0x84, 0x04, + 0x85, 0x80, + 0x86, 0x24, + 0x87, 0x78, + 0x88, 0x10, + 0x89, 0x00, + 0x90, 0x01, + 0x91, 0x01, + 0xa0, 0x04, + 0xa1, 0x00, + 0xa2, 0x00, + 0xb0, 0x91, + 0xb1, 0x0b, + 0xc0, 0x53, + 0xc1, 0x70, + 0xc2, 0x12, + 0xd0, 0x00, + 0xd1, 0x00, + 0xd2, 0x00, + 0xd3, 0x00, + 0xd4, 0x00, + 0xd5, 0x00, + 0xde, 0x00, + 0xdf, 0x00, + 0x61, 0x49, + 0x62, 0x0b, + 0x53, 0x08, + 0x59, 0x08, + 0xff, 0xff, +}; +#endif static struct stv0297_config alps_tdee4_stv0297_config = { .demod_address = 0x1c, +#ifdef STV0297_CS2 .fclk = STV0297_PAL_FCLK, .demodfreq = STV0297_PAL_IF - STV0297_PAL_FCLK, +#else + .inittab = alps_tdee4_stv0297_inittab, +// .invert = 1, +// .pll_set = alps_tdee4_stv0297_pll_set, +#endif }; /* try to figure out the frontend, each card/box can have on of the following list */ @@ -448,7 +552,11 @@ int flexcop_frontend_init(struct flexcop_device *fc) info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address); } else /* try the cable dvb (stv0297) */ +#ifdef STV0297_CS2 if ((fc->fe = stv0297_cs2_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap)) != NULL) { +#else + if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap)) != NULL) { +#endif fc->dev_type = FC_CABLE; fc->fe->ops->tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address); diff --git a/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.h b/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.h index ad261b593..a7c1e7867 100644 --- a/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.h +++ b/linux/drivers/media/dvb/bt8xx/dvb-bt8xx.h @@ -40,7 +40,7 @@ #include "cx24110.h" #include "or51211.h" #include "lgdt330x.h" -#include "fe_lgh06xf.h" +#include "lg_h06xf.h" #include "zl10353.h" struct dvb_bt8xx_card { diff --git a/linux/drivers/media/dvb/dvb-usb/cxusb.c b/linux/drivers/media/dvb/dvb-usb/cxusb.c index 11c8c9812..f0bdb7323 100644 --- a/linux/drivers/media/dvb/dvb-usb/cxusb.c +++ b/linux/drivers/media/dvb/dvb-usb/cxusb.c @@ -27,7 +27,7 @@ #include "cx22702.h" #include "lgdt330x.h" -#include "fe_lgh06xf.h" +#include "lg_h06xf.h" #include "mt352.h" #include "mt352_priv.h" diff --git a/linux/drivers/media/dvb/frontends/Kconfig b/linux/drivers/media/dvb/frontends/Kconfig index 6d90ff3f7..0ef361f03 100644 --- a/linux/drivers/media/dvb/frontends/Kconfig +++ b/linux/drivers/media/dvb/frontends/Kconfig @@ -216,4 +216,20 @@ config DVB_LGDT330X An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. + +comment "Miscellaneous devices" + depends on DVB_CORE + +config DVB_LNBP21 + tristate "LNBP21 SEC controller" + depends on DVB_CORE + help + An SEC control chip. + +config DVB_ISL6421 + tristate "ISL6421 SEC controller" + depends on DVB_CORE + help + An SEC control chip. + endmenu diff --git a/linux/drivers/media/dvb/frontends/Makefile b/linux/drivers/media/dvb/frontends/Makefile index d09b6071f..5222245c7 100644 --- a/linux/drivers/media/dvb/frontends/Makefile +++ b/linux/drivers/media/dvb/frontends/Makefile @@ -31,3 +31,5 @@ obj-$(CONFIG_DVB_BCM3510) += bcm3510.o obj-$(CONFIG_DVB_S5H1420) += s5h1420.o obj-$(CONFIG_DVB_LGDT330X) += lgdt330x.o obj-$(CONFIG_DVB_CX24123) += cx24123.o +obj-$(CONFIG_DVB_LNBP21) += lnbp21.o +obj-$(CONFIG_DVB_ISL6421) += isl6421.o diff --git a/linux/drivers/media/dvb/frontends/bsbe1.h b/linux/drivers/media/dvb/frontends/bsbe1.h index 6b52d5abf..b2aeddb14 100644 --- a/linux/drivers/media/dvb/frontends/bsbe1.h +++ b/linux/drivers/media/dvb/frontends/bsbe1.h @@ -106,6 +106,8 @@ static int alps_bsbe1_tuner_set_params(struct dvb_frontend* fe, struct dvb_front data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4; + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); ret = i2c_transfer(i2c, &msg, 1); return (ret != 1) ? -EIO : 0; } diff --git a/linux/drivers/media/dvb/frontends/bsru6.h b/linux/drivers/media/dvb/frontends/bsru6.h index 5d13c5e4d..5533512b0 100644 --- a/linux/drivers/media/dvb/frontends/bsru6.h +++ b/linux/drivers/media/dvb/frontends/bsru6.h @@ -120,6 +120,8 @@ static int alps_bsru6_tuner_set_params(struct dvb_frontend *fe, struct dvb_front if (params->frequency > 1530000) buf[3] = 0xc0; + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); if (i2c_transfer(i2c, &msg, 1) != 1) return -EIO; return 0; diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.c b/linux/drivers/media/dvb/frontends/dvb-pll.c index 7e65841b1..a1a4be41e 100644 --- a/linux/drivers/media/dvb/frontends/dvb-pll.c +++ b/linux/drivers/media/dvb/frontends/dvb-pll.c @@ -229,7 +229,7 @@ EXPORT_SYMBOL(dvb_pll_tua6034); /* Infineon TUA6034 * used in LG TDVS-H061F, LG TDVS-H062F and LG TDVS-H064F */ -struct dvb_pll_desc dvb_pll_tdvs_tua6034 = { +struct dvb_pll_desc dvb_pll_lg_tdvs_h06xf = { .name = "LG TDVS-H06xF", .min = 54000000, .max = 863000000, @@ -240,7 +240,7 @@ struct dvb_pll_desc dvb_pll_tdvs_tua6034 = { { 999999999, 44000000, 62500, 0xce, 0x04 }, }, }; -EXPORT_SYMBOL(dvb_pll_tdvs_tua6034); +EXPORT_SYMBOL(dvb_pll_lg_tdvs_h06xf); /* Philips FMD1216ME * used in Medion Hybrid PCMCIA card and USB Box diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.h b/linux/drivers/media/dvb/frontends/dvb-pll.h index 3908ae1d4..66361cd18 100644 --- a/linux/drivers/media/dvb/frontends/dvb-pll.h +++ b/linux/drivers/media/dvb/frontends/dvb-pll.h @@ -34,7 +34,7 @@ extern struct dvb_pll_desc dvb_pll_unknown_1; extern struct dvb_pll_desc dvb_pll_tua6010xs; extern struct dvb_pll_desc dvb_pll_env57h1xd5; extern struct dvb_pll_desc dvb_pll_tua6034; -extern struct dvb_pll_desc dvb_pll_tdvs_tua6034; +extern struct dvb_pll_desc dvb_pll_lg_tdvs_h06xf; extern struct dvb_pll_desc dvb_pll_tda665x; extern struct dvb_pll_desc dvb_pll_fmd1216me; extern struct dvb_pll_desc dvb_pll_tded4; diff --git a/linux/drivers/media/dvb/frontends/isl6421.c b/linux/drivers/media/dvb/frontends/isl6421.c new file mode 100644 index 000000000..36992077a --- /dev/null +++ b/linux/drivers/media/dvb/frontends/isl6421.c @@ -0,0 +1,149 @@ +/* + * isl6421.h - driver for lnb supply and control ic ISL6421 + * + * Copyright (C) 2006 Andrew de Quincey + * Copyright (C) 2006 Oliver Endriss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/string.h> +#include <linux/slab.h> + +#include "dvb_frontend.h" +#include "isl6421.h" + +struct isl6421 { + u8 config; + u8 override_or; + u8 override_and; + struct i2c_adapter *i2c; + u8 i2c_addr; + void (*release_chain)(struct dvb_frontend* fe); +}; + +static int isl6421_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct isl6421 *isl6421 = (struct isl6421 *) fe->misc_priv; + struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0, + .buf = &isl6421->config, + .len = sizeof(isl6421->config) }; + + isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1); + + switch(voltage) { + case SEC_VOLTAGE_OFF: + break; + case SEC_VOLTAGE_13: + isl6421->config |= ISL6421_EN1; + break; + case SEC_VOLTAGE_18: + isl6421->config |= (ISL6421_EN1 | ISL6421_VSEL1); + break; + default: + return -EINVAL; + }; + + isl6421->config |= isl6421->override_or; + isl6421->config &= isl6421->override_and; + + return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static int isl6421_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg) +{ + struct isl6421 *isl6421 = (struct isl6421 *) fe->misc_priv; + struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0, + .buf = &isl6421->config, + .len = sizeof(isl6421->config) }; + + if (arg) + isl6421->config |= ISL6421_LLC1; + else + isl6421->config &= ~ISL6421_LLC1; + + isl6421->config |= isl6421->override_or; + isl6421->config &= isl6421->override_and; + + return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static void isl6421_release(struct dvb_frontend *fe) +{ + struct isl6421 *isl6421 = (struct isl6421 *) fe->misc_priv; + + /* power off */ + isl6421_set_voltage(fe, SEC_VOLTAGE_OFF); + + /* free data & call next release routine */ + fe->ops->release = isl6421->release_chain; + kfree(fe->misc_priv); + fe->misc_priv = NULL; + if (fe->ops->release) + fe->ops->release(fe); +} + +int isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr, + u8 override_set, u8 override_clear) +{ + struct isl6421 *isl6421 = kmalloc(sizeof(struct isl6421), GFP_KERNEL); + if (!isl6421) + return -ENOMEM; + + /* default configuration */ + isl6421->config = ISL6421_ISEL1; + isl6421->i2c = i2c; + isl6421->i2c_addr = i2c_addr; + fe->misc_priv = isl6421; + + /* bits which should be forced to '1' */ + isl6421->override_or = override_set; + + /* bits which should be forced to '0' */ + isl6421->override_and = ~override_clear; + + /* detect if it is present or not */ + if (isl6421_set_voltage(fe, SEC_VOLTAGE_OFF)) { + kfree(isl6421); + fe->misc_priv = NULL; + return -EIO; + } + + /* install release callback */ + isl6421->release_chain = fe->ops->release; + fe->ops->release = isl6421_release; + + /* override frontend ops */ + fe->ops->set_voltage = isl6421_set_voltage; + fe->ops->enable_high_lnb_voltage = isl6421_enable_high_lnb_voltage; + + return 0; +} +EXPORT_SYMBOL(isl6421_attach); + +MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6421"); +MODULE_AUTHOR("Andrew de Quincey & Oliver Endriss"); +MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/frontends/isl6421.h b/linux/drivers/media/dvb/frontends/isl6421.h new file mode 100644 index 000000000..675f80a19 --- /dev/null +++ b/linux/drivers/media/dvb/frontends/isl6421.h @@ -0,0 +1,46 @@ +/* + * isl6421.h - driver for lnb supply and control ic ISL6421 + * + * Copyright (C) 2006 Andrew de Quincey + * Copyright (C) 2006 Oliver Endriss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ + +#ifndef _ISL6421_H +#define _ISL6421_H + +#include <linux/dvb/frontend.h> + +/* system register bits */ +#define ISL6421_OLF1 0x01 +#define ISL6421_EN1 0x02 +#define ISL6421_VSEL1 0x04 +#define ISL6421_LLC1 0x08 +#define ISL6421_ENT1 0x10 +#define ISL6421_ISEL1 0x20 +#define ISL6421_DCL 0x40 + +/* override_set and override_clear control which system register bits (above) to always set & clear */ +extern int isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr, + u8 override_set, u8 override_clear); + +#endif diff --git a/linux/drivers/media/dvb/frontends/fe_lgh06xf.h b/linux/drivers/media/dvb/frontends/lg_h06xf.h index c5e8b5ff1..21acb5bad 100644 --- a/linux/drivers/media/dvb/frontends/fe_lgh06xf.h +++ b/linux/drivers/media/dvb/frontends/lg_h06xf.h @@ -1,5 +1,5 @@ /* - * fe_lgh06xf.h - ATSC Tuner support for LG TDVS H06xF + * lg_h06xf.h - ATSC Tuner support for LG TDVS-H06xF * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -16,8 +16,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef FE_LGH06XF_H -#define FE_LGH06XF_H +#ifndef _LG_H06XF_H_ +#define _LG_H06XF_H_ #include "dvb-pll.h" static int lg_h06xf_pll_set(struct dvb_frontend* fe, struct i2c_adapter* i2c_adap, @@ -28,7 +28,9 @@ static int lg_h06xf_pll_set(struct dvb_frontend* fe, struct i2c_adapter* i2c_ada .buf = buf, .len = sizeof(buf) }; int err; - dvb_pll_configure(&dvb_pll_tdvs_tua6034, buf, params->frequency, 0); + dvb_pll_configure(&dvb_pll_lg_tdvs_h06xf, buf, params->frequency, 0); + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); if ((err = i2c_transfer(i2c_adap, &msg, 1)) != 1) { printk(KERN_WARNING "lg_h06xf: %s error " "(addr %02x <- %02x, err = %i)\n", @@ -51,6 +53,8 @@ static int lg_h06xf_pll_set(struct dvb_frontend* fe, struct i2c_adapter* i2c_ada buf[1] = 0x50; msg.len = 2; #endif + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); if ((err = i2c_transfer(i2c_adap, &msg, 1)) != 1) { printk(KERN_WARNING "lg_h06xf: %s error " "(addr %02x <- %02x, err = %i)\n", diff --git a/linux/drivers/media/dvb/frontends/lnbp21.c b/linux/drivers/media/dvb/frontends/lnbp21.c new file mode 100644 index 000000000..c9152c1fb --- /dev/null +++ b/linux/drivers/media/dvb/frontends/lnbp21.c @@ -0,0 +1,145 @@ +/* + * lnbp21.h - driver for lnb supply and control ic lnbp21 + * + * Copyright (C) 2006 Oliver Endriss + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + * + * + * the project's page is at http://www.linuxtv.org + */ +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/string.h> +#include <linux/slab.h> + +#include "dvb_frontend.h" +#include "lnbp21.h" + +struct lnbp21 { + u8 config; + u8 override_or; + u8 override_and; + struct i2c_adapter *i2c; + void (*release_chain)(struct dvb_frontend* fe); +}; + +static int lnbp21_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv; + struct i2c_msg msg = { .addr = 0x08, .flags = 0, + .buf = &lnbp21->config, + .len = sizeof(lnbp21->config) }; + + lnbp21->config &= ~(LNBP21_VSEL | LNBP21_EN); + + switch(voltage) { + case SEC_VOLTAGE_OFF: + break; + case SEC_VOLTAGE_13: + lnbp21->config |= LNBP21_EN; + break; + case SEC_VOLTAGE_18: + lnbp21->config |= (LNBP21_EN | LNBP21_VSEL); + break; + default: + return -EINVAL; + }; + + lnbp21->config |= lnbp21->override_or; + lnbp21->config &= lnbp21->override_and; + + return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg) +{ + struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv; + struct i2c_msg msg = { .addr = 0x08, .flags = 0, + .buf = &lnbp21->config, + .len = sizeof(lnbp21->config) }; + + if (arg) + lnbp21->config |= LNBP21_LLC; + else + lnbp21->config &= ~LNBP21_LLC; + + lnbp21->config |= lnbp21->override_or; + lnbp21->config &= lnbp21->override_and; + + return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static void lnbp21_release(struct dvb_frontend *fe) +{ + struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv; + + /* LNBP power off */ + lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF); + + /* free data & call next release routine */ + fe->ops->release = lnbp21->release_chain; + kfree(fe->misc_priv); + fe->misc_priv = NULL; + if (fe->ops->release) + fe->ops->release(fe); +} + +int lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear) +{ + struct lnbp21 *lnbp21 = kmalloc(sizeof(struct lnbp21), GFP_KERNEL); + if (!lnbp21) + return -ENOMEM; + + /* default configuration */ + lnbp21->config = LNBP21_ISEL; + lnbp21->i2c = i2c; + fe->misc_priv = lnbp21; + + /* bits which should be forced to '1' */ + lnbp21->override_or = override_set; + + /* bits which should be forced to '0' */ + lnbp21->override_and = ~override_clear; + + /* detect if it is present or not */ + if (lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF)) { + kfree(lnbp21); + fe->misc_priv = NULL; + return -EIO; + } + + /* install release callback */ + lnbp21->release_chain = fe->ops->release; + fe->ops->release = lnbp21_release; + + /* override frontend ops */ + fe->ops->set_voltage = lnbp21_set_voltage; + fe->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; + + return 0; +} +EXPORT_SYMBOL(lnbp21_attach); + +MODULE_DESCRIPTION("Driver for lnb supply and control ic lnbp21"); +MODULE_AUTHOR("Oliver Endriss"); +MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/frontends/lnbp21.h b/linux/drivers/media/dvb/frontends/lnbp21.h index 0dcbe61b6..047a4ab68 100644 --- a/linux/drivers/media/dvb/frontends/lnbp21.h +++ b/linux/drivers/media/dvb/frontends/lnbp21.h @@ -27,7 +27,7 @@ #ifndef _LNBP21_H #define _LNBP21_H -/* system register */ +/* system register bits */ #define LNBP21_OLF 0x01 #define LNBP21_OTF 0x02 #define LNBP21_EN 0x04 @@ -37,103 +37,9 @@ #define LNBP21_ISEL 0x40 #define LNBP21_PCL 0x80 -struct lnbp21 { - u8 config; - u8 override_or; - u8 override_and; - struct i2c_adapter *i2c; - void (*release_chain)(struct dvb_frontend* fe); -}; +#include <linux/dvb/frontend.h> -static int lnbp21_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) -{ - struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv; - struct i2c_msg msg = { .addr = 0x08, .flags = 0, - .buf = &lnbp21->config, - .len = sizeof(lnbp21->config) }; - - lnbp21->config &= ~(LNBP21_VSEL | LNBP21_EN); - - switch(voltage) { - case SEC_VOLTAGE_OFF: - break; - case SEC_VOLTAGE_13: - lnbp21->config |= LNBP21_EN; - break; - case SEC_VOLTAGE_18: - lnbp21->config |= (LNBP21_EN | LNBP21_VSEL); - break; - default: - return -EINVAL; - }; - - lnbp21->config |= lnbp21->override_or; - lnbp21->config &= lnbp21->override_and; - - return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO; -} - -static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg) -{ - struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv; - struct i2c_msg msg = { .addr = 0x08, .flags = 0, - .buf = &lnbp21->config, - .len = sizeof(lnbp21->config) }; - - if (arg) - lnbp21->config |= LNBP21_LLC; - else - lnbp21->config &= ~LNBP21_LLC; - - lnbp21->config |= lnbp21->override_or; - lnbp21->config &= lnbp21->override_and; - - return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO; -} - -static void lnbp21_exit(struct dvb_frontend *fe) -{ - struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv; - - /* LNBP power off */ - lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF); - - /* free data & call next release routine */ - fe->ops->release = lnbp21->release_chain; - kfree(fe->misc_priv); - fe->misc_priv = NULL; - if (fe->ops->release) - fe->ops->release(fe); -} - -static int lnbp21_init(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear) -{ - struct lnbp21 *lnbp21 = kmalloc(sizeof(struct lnbp21), GFP_KERNEL); - - if (!lnbp21) - return -ENOMEM; - - /* default configuration */ - lnbp21->config = LNBP21_ISEL; - - /* bits which should be forced to '1' */ - lnbp21->override_or = override_set; - - /* bits which should be forced to '0' */ - lnbp21->override_and = ~override_clear; - - /* install release callback */ - lnbp21->release_chain = fe->ops->release; - fe->ops->release = lnbp21_exit; - - /* override frontend ops */ - fe->ops->set_voltage = lnbp21_set_voltage; - fe->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; - - lnbp21->i2c = i2c; - fe->misc_priv = lnbp21; - - return lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF); -} +/* override_set and override_clear control which system register bits (above) to always set & clear */ +extern int lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear); #endif diff --git a/linux/drivers/media/dvb/frontends/stv0297.c b/linux/drivers/media/dvb/frontends/stv0297.c index 7e8855723..9c5788c2e 100644 --- a/linux/drivers/media/dvb/frontends/stv0297.c +++ b/linux/drivers/media/dvb/frontends/stv0297.c @@ -68,19 +68,25 @@ static int stv0297_readreg(struct stv0297_state *state, u8 reg) int ret; u8 b0[] = { reg }; u8 b1[] = { 0 }; - struct i2c_msg msg[] = { {.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = - 1}, - {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1} - }; + struct i2c_msg msg[] = { {.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = 1}, + {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1} + }; // this device needs a STOP between the register and data - if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) { - dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret); - return -1; - } - if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) { - dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret); - return -1; + if (state->config->stop_during_read) { + if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) { + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret); + return -1; + } + if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) { + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret); + return -1; + } + } else { + if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) { + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret); + return -1; + } } return b1[0]; @@ -107,13 +113,20 @@ static int stv0297_readregs(struct stv0297_state *state, u8 reg1, u8 * b, u8 len }; // this device needs a STOP between the register and data - if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) { - dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret); - return -1; - } - if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) { - dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret); - return -1; + if (state->config->stop_during_read) { + if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) { + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret); + return -1; + } + if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) { + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret); + return -1; + } + } else { + if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) { + dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret); + return -1; + } } return 0; diff --git a/linux/drivers/media/dvb/frontends/stv0297.h b/linux/drivers/media/dvb/frontends/stv0297.h index 8ff793c90..1da5384fb 100644 --- a/linux/drivers/media/dvb/frontends/stv0297.h +++ b/linux/drivers/media/dvb/frontends/stv0297.h @@ -37,6 +37,9 @@ struct stv0297_config /* does the "inversion" need inverted? */ u8 invert:1; + + /* set to 1 if the device requires an i2c STOP during reading */ + u8 stop_during_read:1; }; extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config, diff --git a/linux/drivers/media/dvb/frontends/stv0299.c b/linux/drivers/media/dvb/frontends/stv0299.c index 5a8131023..e91bb5842 100644 --- a/linux/drivers/media/dvb/frontends/stv0299.c +++ b/linux/drivers/media/dvb/frontends/stv0299.c @@ -604,10 +604,12 @@ static int stv0299_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) struct stv0299_state* state = fe->demodulator_priv; if (enable) { - return stv0299_writeregI(state, 0x05, 0xb5); + stv0299_writeregI(state, 0x05, 0xb5); } else { - return stv0299_writeregI(state, 0x05, 0x35); + stv0299_writeregI(state, 0x05, 0x35); } + udelay(1); + return 0; } static int stv0299_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) diff --git a/linux/drivers/media/dvb/ttpci/Kconfig b/linux/drivers/media/dvb/ttpci/Kconfig index c26e23291..8ffaac634 100644 --- a/linux/drivers/media/dvb/ttpci/Kconfig +++ b/linux/drivers/media/dvb/ttpci/Kconfig @@ -10,6 +10,7 @@ config DVB_AV7110 select DVB_SP8870 select DVB_STV0297 select DVB_L64781 + select DVB_LNBP21 help Support for SAA7146 and AV7110 based DVB cards as produced by Fujitsu-Siemens, Technotrend, Hauppauge and others. @@ -67,6 +68,7 @@ config DVB_BUDGET select DVB_TDA8083 select DVB_TDA10021 select DVB_S5H1420 + select DVB_LNBP21 help Support for simple SAA7146 based DVB cards (so called Budget- or Nova-PCI cards) without onboard @@ -84,6 +86,7 @@ config DVB_BUDGET_CI select DVB_STV0297 select DVB_STV0299 select DVB_TDA1004X + select DVB_LNBP21 help Support for simple SAA7146 based DVB cards (so called Budget- or Nova-PCI cards) without onboard diff --git a/linux/drivers/media/dvb/ttpci/Makefile b/linux/drivers/media/dvb/ttpci/Makefile index a690730ac..c98c8e013 100644 --- a/linux/drivers/media/dvb/ttpci/Makefile +++ b/linux/drivers/media/dvb/ttpci/Makefile @@ -15,7 +15,7 @@ EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ hostprogs-y := fdump -ifdef CONFIG_DVB_AV7110_FIRMWARE +ifeq (CONFIG_DVB_AV7110_FIRMWARE,y) $(obj)/av7110.o: $(obj)/fdump $(obj)/av7110_firm.h $(obj)/av7110_firm.h: diff --git a/linux/drivers/media/dvb/ttpci/av7110.c b/linux/drivers/media/dvb/ttpci/av7110.c index 9567e03a1..dbb332304 100644 --- a/linux/drivers/media/dvb/ttpci/av7110.c +++ b/linux/drivers/media/dvb/ttpci/av7110.c @@ -1859,6 +1859,7 @@ static struct stv0297_config nexusca_stv0297_config = { .demod_address = 0x1C, .inittab = nexusca_stv0297_inittab, .invert = 1, + .stop_during_read = 1, }; @@ -2223,7 +2224,7 @@ static int frontend_init(struct av7110 *av7110) av7110->fe->ops->tuner_ops.set_params = alps_bsbe1_tuner_set_params; av7110->fe->tuner_priv = &av7110->i2c_adap; - if (lnbp21_init(av7110->fe, &av7110->i2c_adap, 0, 0)) { + if (lnbp21_attach(av7110->fe, &av7110->i2c_adap, 0, 0)) { printk("dvb-ttpci: LNBP21 not found!\n"); if (av7110->fe->ops->release) av7110->fe->ops->release(av7110->fe); diff --git a/linux/drivers/media/dvb/ttpci/budget-ci.c b/linux/drivers/media/dvb/ttpci/budget-ci.c index ed610e56b..eb03b140b 100644 --- a/linux/drivers/media/dvb/ttpci/budget-ci.c +++ b/linux/drivers/media/dvb/ttpci/budget-ci.c @@ -977,6 +977,7 @@ static struct stv0297_config dvbc_philips_tdm1316l_config = { .demod_address = 0x1c, .inittab = dvbc_philips_tdm1316l_inittab, .invert = 0, + .stop_during_read = 1, }; @@ -1043,7 +1044,7 @@ static void frontend_init(struct budget_ci *budget_ci) budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; budget_ci->budget.dvb_frontend->ops->dishnetwork_send_legacy_command = NULL; - if (lnbp21_init(budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0)) { + if (lnbp21_attach(budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0)) { printk("%s: No LNBP21 found!\n", __FUNCTION__); if (budget_ci->budget.dvb_frontend->ops->release) budget_ci->budget.dvb_frontend->ops->release(budget_ci->budget.dvb_frontend); diff --git a/linux/drivers/media/dvb/ttpci/budget.c b/linux/drivers/media/dvb/ttpci/budget.c index a231975cb..d98395fef 100644 --- a/linux/drivers/media/dvb/ttpci/budget.c +++ b/linux/drivers/media/dvb/ttpci/budget.c @@ -423,7 +423,7 @@ static void frontend_init(struct budget *budget) budget->dvb_frontend = s5h1420_attach(&s5h1420_config, &budget->i2c_adap); if (budget->dvb_frontend) { budget->dvb_frontend->ops->tuner_ops.set_params = s5h1420_tuner_set_params; - if (lnbp21_init(budget->dvb_frontend, &budget->i2c_adap, 0, 0)) { + if (lnbp21_attach(budget->dvb_frontend, &budget->i2c_adap, 0, 0)) { printk("%s: No LNBP21 found!\n", __FUNCTION__); goto error_out; } diff --git a/linux/drivers/media/dvb/ttusb-budget/Kconfig b/linux/drivers/media/dvb/ttusb-budget/Kconfig index 914587d52..92c7cdcf8 100644 --- a/linux/drivers/media/dvb/ttusb-budget/Kconfig +++ b/linux/drivers/media/dvb/ttusb-budget/Kconfig @@ -6,6 +6,8 @@ config DVB_TTUSB_BUDGET select DVB_VES1820 select DVB_TDA8083 select DVB_STV0299 + select DVB_STV0297 + select DVB_LNBP21 help Support for external USB adapters designed by Technotrend and produced by Hauppauge, shipped under the brand name 'Nova-USB'. diff --git a/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index f2aa23d76..af1631a25 100644 --- a/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -33,6 +33,8 @@ #include "tda1004x.h" #include "stv0299.h" #include "tda8083.h" +#include "stv0297.h" +#include "lnbp21.h" #include <linux/dvb/frontend.h> #include <linux/dvb/dmx.h> @@ -494,31 +496,6 @@ static int ttusb_send_diseqc(struct dvb_frontend* fe, } #endif -static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) -{ - struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; - int ret; - u8 data[1]; - struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) }; - - switch(voltage) { - case SEC_VOLTAGE_OFF: - data[0] = 0x00; - break; - case SEC_VOLTAGE_13: - data[0] = 0x44; - break; - case SEC_VOLTAGE_18: - data[0] = 0x4c; - break; - default: - return -EINVAL; - }; - - ret = i2c_transfer(&ttusb->i2c_adap, &msg, 1); - return (ret != 1) ? -EIO : 0; -} - static int ttusb_update_lnb(struct ttusb *ttusb) { u8 b[] = { 0xaa, ++ttusb->c, 0x16, 5, /*power: */ 1, @@ -1070,6 +1047,8 @@ static int alps_tdmb7_tuner_set_params(struct dvb_frontend* fe, struct dvb_front data[2] = ((div >> 10) & 0x60) | 0x85; data[3] = params->frequency < 592000000 ? 0x40 : 0x80; + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1) return -EIO; return 0; } @@ -1090,6 +1069,8 @@ static int philips_tdm1316l_tuner_init(struct dvb_frontend* fe) struct i2c_msg tuner_msg = { .addr=0x60, .flags=0, .buf=td1316_init, .len=sizeof(td1316_init) }; // setup PLL configuration + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) return -EIO; msleep(1); @@ -1097,6 +1078,8 @@ static int philips_tdm1316l_tuner_init(struct dvb_frontend* fe) tuner_msg.addr = 0x65; tuner_msg.buf = disable_mc44BC374c; tuner_msg.len = sizeof(disable_mc44BC374c); + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) { i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1); } @@ -1164,6 +1147,8 @@ static int philips_tdm1316l_tuner_set_params(struct dvb_frontend* fe, struct dvb tuner_buf[2] = 0xca; tuner_buf[3] = (cp << 5) | (filter << 3) | band; + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) return -EIO; @@ -1327,6 +1312,8 @@ static int philips_tsa5059_tuner_set_params(struct dvb_frontend *fe, struct dvb_ if (ttusb->revision == TTUSB_REV_2_2) buf[3] |= 0x20; + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1) return -EIO; @@ -1359,6 +1346,8 @@ static int ttusb_novas_grundig_29504_491_tuner_set_params(struct dvb_frontend *f buf[2] = 0x8e; buf[3] = 0x00; + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1) return -EIO; @@ -1384,6 +1373,8 @@ static int alps_tdbe2_tuner_set_params(struct dvb_frontend* fe, struct dvb_front data[2] = 0x85 | ((div >> 10) & 0x60); data[3] = (params->frequency < 174000000 ? 0x88 : params->frequency < 470000000 ? 0x84 : 0x81); + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); if (i2c_transfer (&ttusb->i2c_adap, &msg, 1) != 1) return -EIO; @@ -1412,6 +1403,174 @@ static u8 read_pwm(struct ttusb* ttusb) } +static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + struct ttusb *ttusb = (struct ttusb *) fe->dvb->priv; + u8 tuner_buf[5]; + struct i2c_msg tuner_msg = {.addr = 0x60, + .flags = 0, + .buf = tuner_buf, + .len = sizeof(tuner_buf) }; + int tuner_frequency = 0; + u8 band, cp, filter; + + // determine charge pump + tuner_frequency = params->frequency; + if (tuner_frequency < 87000000) {return -EINVAL;} + else if (tuner_frequency < 130000000) {cp = 3; band = 1;} + else if (tuner_frequency < 160000000) {cp = 5; band = 1;} + else if (tuner_frequency < 200000000) {cp = 6; band = 1;} + else if (tuner_frequency < 290000000) {cp = 3; band = 2;} + else if (tuner_frequency < 420000000) {cp = 5; band = 2;} + else if (tuner_frequency < 480000000) {cp = 6; band = 2;} + else if (tuner_frequency < 620000000) {cp = 3; band = 4;} + else if (tuner_frequency < 830000000) {cp = 5; band = 4;} + else if (tuner_frequency < 895000000) {cp = 7; band = 4;} + else {return -EINVAL;} + + // assume PLL filter should always be 8MHz for the moment. + filter = 1; + + // calculate divisor + // (Finput + Fif)/Fref; Fif = 36125000 Hz, Fref = 62500 Hz + tuner_frequency = ((params->frequency + 36125000) / 62500); + + // setup tuner buffer + tuner_buf[0] = tuner_frequency >> 8; + tuner_buf[1] = tuner_frequency & 0xff; + tuner_buf[2] = 0xc8; + tuner_buf[3] = (cp << 5) | (filter << 3) | band; + tuner_buf[4] = 0x80; + + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) { + printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 1\n"); + return -EIO; + } + + msleep(50); + + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) { + printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 2\n"); + return -EIO; + } + + msleep(1); + + return 0; +} + +static u8 dvbc_philips_tdm1316l_inittab[] = { + 0x80, 0x21, + 0x80, 0x20, + 0x81, 0x01, + 0x81, 0x00, + 0x00, 0x09, + 0x01, 0x69, + 0x03, 0x00, + 0x04, 0x00, + 0x07, 0x00, + 0x08, 0x00, + 0x20, 0x00, + 0x21, 0x40, + 0x22, 0x00, + 0x23, 0x00, + 0x24, 0x40, + 0x25, 0x88, + 0x30, 0xff, + 0x31, 0x00, + 0x32, 0xff, + 0x33, 0x00, + 0x34, 0x50, + 0x35, 0x7f, + 0x36, 0x00, + 0x37, 0x20, + 0x38, 0x00, + 0x40, 0x1c, + 0x41, 0xff, + 0x42, 0x29, + 0x43, 0x20, + 0x44, 0xff, + 0x45, 0x00, + 0x46, 0x00, + 0x49, 0x04, + 0x4a, 0xff, + 0x4b, 0x7f, + 0x52, 0x30, + 0x55, 0xae, + 0x56, 0x47, + 0x57, 0xe1, + 0x58, 0x3a, + 0x5a, 0x1e, + 0x5b, 0x34, + 0x60, 0x00, + 0x63, 0x00, + 0x64, 0x00, + 0x65, 0x00, + 0x66, 0x00, + 0x67, 0x00, + 0x68, 0x00, + 0x69, 0x00, + 0x6a, 0x02, + 0x6b, 0x00, + 0x70, 0xff, + 0x71, 0x00, + 0x72, 0x00, + 0x73, 0x00, + 0x74, 0x0c, + 0x80, 0x00, + 0x81, 0x00, + 0x82, 0x00, + 0x83, 0x00, + 0x84, 0x04, + 0x85, 0x80, + 0x86, 0x24, + 0x87, 0x78, + 0x88, 0x00, + 0x89, 0x00, + 0x90, 0x01, + 0x91, 0x01, + 0xa0, 0x00, + 0xa1, 0x00, + 0xa2, 0x00, + 0xb0, 0x91, + 0xb1, 0x0b, + 0xc0, 0x4b, + 0xc1, 0x00, + 0xc2, 0x00, + 0xd0, 0x00, + 0xd1, 0x00, + 0xd2, 0x00, + 0xd3, 0x00, + 0xd4, 0x00, + 0xd5, 0x00, + 0xde, 0x00, + 0xdf, 0x00, + 0x61, 0x38, + 0x62, 0x0a, + 0x53, 0x13, + 0x59, 0x08, + 0x55, 0x00, + 0x56, 0x40, + 0x57, 0x08, + 0x58, 0x3d, + 0x88, 0x10, + 0xa0, 0x00, + 0xa0, 0x00, + 0xa0, 0x00, + 0xa0, 0x04, + 0xff, 0xff, +}; + +static struct stv0297_config dvbc_philips_tdm1316l_config = { + .demod_address = 0x1c, + .inittab = dvbc_philips_tdm1316l_inittab, + .invert = 0, +}; + static void frontend_init(struct ttusb* ttusb) { switch(le16_to_cpu(ttusb->dev->descriptor.idProduct)) { @@ -1423,7 +1582,7 @@ static void frontend_init(struct ttusb* ttusb) if(ttusb->revision == TTUSB_REV_2_2) { // ALPS BSBE1 alps_stv0299_config.inittab = alps_bsbe1_inittab; - ttusb->fe->ops->set_voltage = lnbp21_set_voltage; + lnbp21_attach(ttusb->fe, &ttusb->i2c_adap, 0, 0); } else { // ALPS BSRU6 ttusb->fe->ops->set_voltage = ttusb_set_voltage; } @@ -1445,6 +1604,12 @@ static void frontend_init(struct ttusb* ttusb) ttusb->fe->ops->tuner_ops.set_params = alps_tdbe2_tuner_set_params; break; } + + ttusb->fe = stv0297_attach(&dvbc_philips_tdm1316l_config, &ttusb->i2c_adap); + if (ttusb->fe != NULL) { + ttusb->fe->ops->tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params; + break; + } break; case 0x1005: // Hauppauge/TT Nova-USB-t budget (tda10046/Philips td1316(tda6651tt) OR cx22700/ALPS TDMB7(??)) diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index e4dd4181d..4df2ede38 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -18,7 +18,7 @@ config VIDEO_ADV_DEBUG config VIDEO_VIVI tristate "Virtual Video Driver" - depends on VIDEO_V4L2 + depends on VIDEO_V4L2 && !SPARC32 && !SPARC64 default n ---help--- Enables a virtual video driver. This device shows a color bar @@ -223,6 +223,12 @@ config VIDEO_ZORAN_LML33R10 support for the Linux Media Labs LML33R10 MJPEG capture/playback card. +config VIDEO_ZORAN_AVS6EYES + tristate "AverMedia 6 Eyes support (EXPERIMENTAL)" + depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1 + help + Support for the AverMedia 6 Eyes video surveillance card. + config VIDEO_ZR36120 tristate "Zoran ZR36120/36125 Video For Linux" depends on PCI && I2C && VIDEO_V4L1 && BROKEN diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile index bd3f1a006..ad54ecdd7 100644 --- a/linux/drivers/media/video/Makefile +++ b/linux/drivers/media/video/Makefile @@ -11,7 +11,10 @@ tuner-objs := tuner-core.o tuner-types.o tuner-simple.o \ msp3400-objs := msp3400-driver.o msp3400-kthreads.o obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o compat_ioctl32.o -obj-$(CONFIG_VIDEO_V4L1_COMPAT) += v4l1-compat.o + +ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y) + obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o +endif obj-$(CONFIG_VIDEO_BT848) += bt8xx/ obj-$(CONFIG_VIDEO_BT848) += tvaudio.o tda7432.o tda9875.o ir-kbd-i2c.o @@ -30,6 +33,7 @@ obj-$(CONFIG_VIDEO_ZORAN_DC30) += adv7175.o vpx3220.o zr36050.o \ zr36016.o obj-$(CONFIG_VIDEO_ZORAN_LML33) += bt819.o bt856.o zr36060.o obj-$(CONFIG_VIDEO_ZORAN_LML33R10) += saa7114.o adv7170.o zr36060.o +obj-$(CONFIG_VIDEO_ZORAN_AVS6EYES) += bt866.o ks0127.o zr36060.o obj-$(CONFIG_VIDEO_ZORAN) += zr36067.o videocodec.o obj-$(CONFIG_VIDEO_PMS) += pms.o obj-$(CONFIG_VIDEO_PLANB) += planb.o diff --git a/linux/drivers/media/video/bt866.c b/linux/drivers/media/video/bt866.c new file mode 100644 index 000000000..64f21c0a2 --- /dev/null +++ b/linux/drivers/media/video/bt866.c @@ -0,0 +1,378 @@ +/* + bt866 - BT866 Digital Video Encoder (Rockwell Part) + + Copyright (C) 1999 Mike Bernson <mike@mlb.org> + Copyright (C) 1998 Dave Perks <dperks@ibm.net> + + Modifications for LML33/DC10plus unified driver + Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> + + This code was modify/ported from the saa7111 driver written + by Dave Perks. + + This code was adapted for the bt866 by Christer Weinigel and ported + to 2.6 by Martin Samuelsson. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/major.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/pci.h> +#include <linux/signal.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <linux/sched.h> +#include <linux/types.h> +#include <linux/i2c.h> + +#include "compat.h" +#include <linux/videodev.h> +#include <asm/uaccess.h> + +#include <linux/video_encoder.h> + +MODULE_LICENSE("GPL"); + +#define BT866_DEVNAME "bt866" +#define I2C_BT866 0x88 + +MODULE_LICENSE("GPL"); + +#define DEBUG(x) /* Debug driver */ + +/* ----------------------------------------------------------------------- */ + +struct bt866 { + struct i2c_client *i2c; + int addr; + unsigned char reg[128]; + + int norm; + int enable; + int bright; + int contrast; + int hue; + int sat; +}; + +static int bt866_write(struct bt866 *dev, + unsigned char subaddr, unsigned char data); + +static int bt866_do_command(struct bt866 *encoder, + unsigned int cmd, void *arg) +{ + switch (cmd) { + case ENCODER_GET_CAPABILITIES: + { + struct video_encoder_capability *cap = arg; + + DEBUG(printk + (KERN_INFO "%s: get capabilities\n", + encoder->i2c->name)); + + cap->flags + = VIDEO_ENCODER_PAL + | VIDEO_ENCODER_NTSC + | VIDEO_ENCODER_CCIR; + cap->inputs = 2; + cap->outputs = 1; + } + break; + + case ENCODER_SET_NORM: + { + int *iarg = arg; + + DEBUG(printk(KERN_INFO "%s: set norm %d\n", + encoder->i2c->name, *iarg)); + + switch (*iarg) { + + case VIDEO_MODE_NTSC: + break; + + case VIDEO_MODE_PAL: + break; + + default: + return -EINVAL; + + } + encoder->norm = *iarg; + } + break; + + case ENCODER_SET_INPUT: + { + int *iarg = arg; + static const __u8 init[] = { + 0xc8, 0xcc, /* CRSCALE */ + 0xca, 0x91, /* CBSCALE */ + 0xcc, 0x24, /* YC16 | OSDNUM */ + 0xda, 0x00, /* */ + 0xdc, 0x24, /* SETMODE | PAL */ + 0xde, 0x02, /* EACTIVE */ + + /* overlay colors */ + 0x70, 0xEB, 0x90, 0x80, 0xB0, 0x80, /* white */ + 0x72, 0xA2, 0x92, 0x8E, 0xB2, 0x2C, /* yellow */ + 0x74, 0x83, 0x94, 0x2C, 0xB4, 0x9C, /* cyan */ + 0x76, 0x70, 0x96, 0x3A, 0xB6, 0x48, /* green */ + 0x78, 0x54, 0x98, 0xC6, 0xB8, 0xB8, /* magenta */ + 0x7A, 0x41, 0x9A, 0xD4, 0xBA, 0x64, /* red */ + 0x7C, 0x23, 0x9C, 0x72, 0xBC, 0xD4, /* blue */ + 0x7E, 0x10, 0x9E, 0x80, 0xBE, 0x80, /* black */ + + 0x60, 0xEB, 0x80, 0x80, 0xc0, 0x80, /* white */ + 0x62, 0xA2, 0x82, 0x8E, 0xc2, 0x2C, /* yellow */ + 0x64, 0x83, 0x84, 0x2C, 0xc4, 0x9C, /* cyan */ + 0x66, 0x70, 0x86, 0x3A, 0xc6, 0x48, /* green */ + 0x68, 0x54, 0x88, 0xC6, 0xc8, 0xB8, /* magenta */ + 0x6A, 0x41, 0x8A, 0xD4, 0xcA, 0x64, /* red */ + 0x6C, 0x23, 0x8C, 0x72, 0xcC, 0xD4, /* blue */ + 0x6E, 0x10, 0x8E, 0x80, 0xcE, 0x80, /* black */ + }; + int i; + u8 val; + + for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2) + bt866_write(encoder, init[i], init[i+1]); + + val = encoder->reg[0xdc]; + + if (*iarg == 0) + val |= 0x40; /* CBSWAP */ + else + val &= ~0x40; /* !CBSWAP */ + + bt866_write(encoder, 0xdc, val); + + val = encoder->reg[0xcc]; + if (*iarg == 2) + val |= 0x01; /* OSDBAR */ + else + val &= ~0x01; /* !OSDBAR */ + bt866_write(encoder, 0xcc, val); + + DEBUG(printk(KERN_INFO "%s: set input %d\n", + encoder->i2c->name, *iarg)); + + switch (*iarg) { + case 0: + break; + case 1: + break; + default: + return -EINVAL; + + } + } + break; + + case ENCODER_SET_OUTPUT: + { + int *iarg = arg; + + DEBUG(printk(KERN_INFO "%s: set output %d\n", + encoder->i2c->name, *iarg)); + + /* not much choice of outputs */ + if (*iarg != 0) + return -EINVAL; + } + break; + + case ENCODER_ENABLE_OUTPUT: + { + int *iarg = arg; + encoder->enable = !!*iarg; + + DEBUG(printk + (KERN_INFO "%s: enable output %d\n", + encoder->i2c->name, encoder->enable)); + } + break; + + case 4711: + { + int *iarg = arg; + __u8 val; + + printk("bt866: square = %d\n", *iarg); + + val = encoder->reg[0xdc]; + if (*iarg) + val |= 1; /* SQUARE */ + else + val &= ~1; /* !SQUARE */ + bt866_write(encoder, 0xdc, val); + break; + } + + default: + return -EINVAL; + } + + return 0; +} + +static int bt866_write(struct bt866 *encoder, + unsigned char subaddr, unsigned char data) +{ + unsigned char buffer[2]; + int err; + + buffer[0] = subaddr; + buffer[1] = data; + + encoder->reg[subaddr] = data; + + DEBUG(printk + ("%s: write 0x%02X = 0x%02X\n", + encoder->i2c->name, subaddr, data)); + + for (err = 0; err < 3;) { + if (i2c_master_send(encoder->i2c, buffer, 2) == 2) + break; + err++; + printk(KERN_WARNING "%s: I/O error #%d " + "(write 0x%02x/0x%02x)\n", + encoder->i2c->name, err, encoder->addr, subaddr); + schedule_timeout_interruptible(HZ/10); + } + if (err == 3) { + printk(KERN_WARNING "%s: giving up\n", + encoder->i2c->name); + return -1; + } + + return 0; +} + +static int bt866_attach(struct i2c_adapter *adapter); +static int bt866_detach(struct i2c_client *client); +static int bt866_command(struct i2c_client *client, + unsigned int cmd, void *arg); + + +/* Addresses to scan */ +static unsigned short normal_i2c[] = {I2C_BT866>>1, I2C_CLIENT_END}; +static unsigned short probe[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; +static unsigned short ignore[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; + +static struct i2c_client_address_data addr_data = { + normal_i2c, + probe, + ignore, +}; + +static struct i2c_driver i2c_driver_bt866 = { + .driver.name = BT866_DEVNAME, + .id = I2C_DRIVERID_BT866, + .attach_adapter = bt866_attach, + .detach_client = bt866_detach, + .command = bt866_command +}; + + +static struct i2c_client bt866_client_tmpl = +{ + .name = "(nil)", + .addr = 0, + .adapter = NULL, + .driver = &i2c_driver_bt866, + .usage_count = 0 +}; + +static int bt866_found_proc(struct i2c_adapter *adapter, + int addr, int kind) +{ + struct bt866 *encoder; + struct i2c_client *client; + + client = kzalloc(sizeof(*client), GFP_KERNEL); + if (client == NULL) + return -ENOMEM; + memcpy(client, &bt866_client_tmpl, sizeof(*client)); + + encoder = kzalloc(sizeof(*encoder), GFP_KERNEL); + if (encoder == NULL) { + kfree(client); + return -ENOMEM; + } + + i2c_set_clientdata(client, encoder); + client->adapter = adapter; + client->addr = addr; + sprintf(client->name, "%s-%02x", BT866_DEVNAME, adapter->id); + + encoder->i2c = client; + encoder->addr = addr; + //encoder->encoder_type = ENCODER_TYPE_UNKNOWN; + + /* initialize */ + + i2c_attach_client(client); + + return 0; +} + +static int bt866_attach(struct i2c_adapter *adapter) +{ + if (adapter->id == I2C_HW_B_ZR36067) + return i2c_probe(adapter, &addr_data, bt866_found_proc); + return 0; +} + +static int bt866_detach(struct i2c_client *client) +{ + struct bt866 *encoder = i2c_get_clientdata(client); + + i2c_detach_client(client); + kfree(encoder); + kfree(client); + + return 0; +} + +static int bt866_command(struct i2c_client *client, + unsigned int cmd, void *arg) +{ + struct bt866 *encoder = i2c_get_clientdata(client); + return bt866_do_command(encoder, cmd, arg); +} + +static int __devinit bt866_init(void) +{ + i2c_add_driver(&i2c_driver_bt866); + return 0; +} + +static void __devexit bt866_exit(void) +{ + i2c_del_driver(&i2c_driver_bt866); +} + +module_init(bt866_init); +module_exit(bt866_exit); diff --git a/linux/drivers/media/video/bt8xx/bttv-cards.c b/linux/drivers/media/video/bt8xx/bttv-cards.c index b11967fa5..cd45a2429 100644 --- a/linux/drivers/media/video/bt8xx/bttv-cards.c +++ b/linux/drivers/media/video/bt8xx/bttv-cards.c @@ -2768,7 +2768,7 @@ struct tvcard bttv_tvcards[] = { /* Michael Krufky <mkrufky@m1k.net> */ .name = "DViCO FusionHDTV 5 Lite", .tuner = 0, - .tuner_type = TUNER_LG_TDVS_H062F, + .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */ .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .video_inputs = 3, diff --git a/linux/drivers/media/video/cx88/cx88-cards.c b/linux/drivers/media/video/cx88/cx88-cards.c index 383af5609..05e2bc403 100644 --- a/linux/drivers/media/video/cx88/cx88-cards.c +++ b/linux/drivers/media/video/cx88/cx88-cards.c @@ -760,7 +760,7 @@ struct cx88_board cx88_boards[] = { }, [CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD] = { .name = "DViCO FusionHDTV 5 Gold", - .tuner_type = TUNER_LG_TDVS_H062F, + .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H062F */ .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, @@ -1107,7 +1107,7 @@ struct cx88_board cx88_boards[] = { }, [CX88_BOARD_PCHDTV_HD5500] = { .name = "pcHDTV HD5500 HDTV", - .tuner_type = TUNER_LG_TDVS_H062F, + .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */ .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, diff --git a/linux/drivers/media/video/cx88/cx88-dvb.c b/linux/drivers/media/video/cx88/cx88-dvb.c index fbd8387de..a65306c0d 100644 --- a/linux/drivers/media/video/cx88/cx88-dvb.c +++ b/linux/drivers/media/video/cx88/cx88-dvb.c @@ -52,7 +52,7 @@ #endif #ifdef HAVE_LGDT330X # include "lgdt330x.h" -# include "fe_lgh06xf.h" +# include "lg_h06xf.h" #endif #ifdef HAVE_NXT200X # include "nxt200x.h" diff --git a/linux/drivers/media/video/ks0127.c b/linux/drivers/media/video/ks0127.c new file mode 100644 index 000000000..3bf7ac4f5 --- /dev/null +++ b/linux/drivers/media/video/ks0127.c @@ -0,0 +1,846 @@ +/* + * Video Capture Driver (Video for Linux 1/2) + * for the Matrox Marvel G200,G400 and Rainbow Runner-G series + * + * This module is an interface to the KS0127 video decoder chip. + * + * Copyright (C) 1999 Ryan Drake <stiletto@mediaone.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ***************************************************************************** + * + * Modified and extended by + * Mike Bernson <mike@mlb.org> + * Gerard v.d. Horst + * Leon van Stuivenberg <l.vanstuivenberg@chello.nl> + * Gernot Ziegler <gz@lysator.liu.se> + * + * Version History: + * V1.0 Ryan Drake Initial version by Ryan Drake + * V1.1 Gerard v.d. Horst Added some debugoutput, reset the video-standard + */ + +#ifndef __KERNEL__ +#define __KERNEL__ +#endif + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/proc_fs.h> +#include "ks0127.h" + +#include <linux/i2c.h> +#include <linux/video_decoder.h> + +#define dprintk if (debug) printk + +/* i2c identification */ +#define I2C_KS0127_ADDON 0xD8 +#define I2C_KS0127_ONBOARD 0xDA + +#define KS_TYPE_UNKNOWN 0 +#define KS_TYPE_0122S 1 +#define KS_TYPE_0127 2 +#define KS_TYPE_0127B 3 + +/* ks0127 control registers */ +#define KS_STAT 0x00 +#define KS_CMDA 0x01 +#define KS_CMDB 0x02 +#define KS_CMDC 0x03 +#define KS_CMDD 0x04 +#define KS_HAVB 0x05 +#define KS_HAVE 0x06 +#define KS_HS1B 0x07 +#define KS_HS1E 0x08 +#define KS_HS2B 0x09 +#define KS_HS2E 0x0a +#define KS_AGC 0x0b +#define KS_HXTRA 0x0c +#define KS_CDEM 0x0d +#define KS_PORTAB 0x0e +#define KS_LUMA 0x0f +#define KS_CON 0x10 +#define KS_BRT 0x11 +#define KS_CHROMA 0x12 +#define KS_CHROMB 0x13 +#define KS_DEMOD 0x14 +#define KS_SAT 0x15 +#define KS_HUE 0x16 +#define KS_VERTIA 0x17 +#define KS_VERTIB 0x18 +#define KS_VERTIC 0x19 +#define KS_HSCLL 0x1a +#define KS_HSCLH 0x1b +#define KS_VSCLL 0x1c +#define KS_VSCLH 0x1d +#define KS_OFMTA 0x1e +#define KS_OFMTB 0x1f +#define KS_VBICTL 0x20 +#define KS_CCDAT2 0x21 +#define KS_CCDAT1 0x22 +#define KS_VBIL30 0x23 +#define KS_VBIL74 0x24 +#define KS_VBIL118 0x25 +#define KS_VBIL1512 0x26 +#define KS_TTFRAM 0x27 +#define KS_TESTA 0x28 +#define KS_UVOFFH 0x29 +#define KS_UVOFFL 0x2a +#define KS_UGAIN 0x2b +#define KS_VGAIN 0x2c +#define KS_VAVB 0x2d +#define KS_VAVE 0x2e +#define KS_CTRACK 0x2f +#define KS_POLCTL 0x30 +#define KS_REFCOD 0x31 +#define KS_INVALY 0x32 +#define KS_INVALU 0x33 +#define KS_INVALV 0x34 +#define KS_UNUSEY 0x35 +#define KS_UNUSEU 0x36 +#define KS_UNUSEV 0x37 +#define KS_USRSAV 0x38 +#define KS_USREAV 0x39 +#define KS_SHS1A 0x3a +#define KS_SHS1B 0x3b +#define KS_SHS1C 0x3c +#define KS_CMDE 0x3d +#define KS_VSDEL 0x3e +#define KS_CMDF 0x3f +#define KS_GAMMA0 0x40 +#define KS_GAMMA1 0x41 +#define KS_GAMMA2 0x42 +#define KS_GAMMA3 0x43 +#define KS_GAMMA4 0x44 +#define KS_GAMMA5 0x45 +#define KS_GAMMA6 0x46 +#define KS_GAMMA7 0x47 +#define KS_GAMMA8 0x48 +#define KS_GAMMA9 0x49 +#define KS_GAMMA10 0x4a +#define KS_GAMMA11 0x4b +#define KS_GAMMA12 0x4c +#define KS_GAMMA13 0x4d +#define KS_GAMMA14 0x4e +#define KS_GAMMA15 0x4f +#define KS_GAMMA16 0x50 +#define KS_GAMMA17 0x51 +#define KS_GAMMA18 0x52 +#define KS_GAMMA19 0x53 +#define KS_GAMMA20 0x54 +#define KS_GAMMA21 0x55 +#define KS_GAMMA22 0x56 +#define KS_GAMMA23 0x57 +#define KS_GAMMA24 0x58 +#define KS_GAMMA25 0x59 +#define KS_GAMMA26 0x5a +#define KS_GAMMA27 0x5b +#define KS_GAMMA28 0x5c +#define KS_GAMMA29 0x5d +#define KS_GAMMA30 0x5e +#define KS_GAMMA31 0x5f +#define KS_GAMMAD0 0x60 +#define KS_GAMMAD1 0x61 +#define KS_GAMMAD2 0x62 +#define KS_GAMMAD3 0x63 +#define KS_GAMMAD4 0x64 +#define KS_GAMMAD5 0x65 +#define KS_GAMMAD6 0x66 +#define KS_GAMMAD7 0x67 +#define KS_GAMMAD8 0x68 +#define KS_GAMMAD9 0x69 +#define KS_GAMMAD10 0x6a +#define KS_GAMMAD11 0x6b +#define KS_GAMMAD12 0x6c +#define KS_GAMMAD13 0x6d +#define KS_GAMMAD14 0x6e +#define KS_GAMMAD15 0x6f +#define KS_GAMMAD16 0x70 +#define KS_GAMMAD17 0x71 +#define KS_GAMMAD18 0x72 +#define KS_GAMMAD19 0x73 +#define KS_GAMMAD20 0x74 +#define KS_GAMMAD21 0x75 +#define KS_GAMMAD22 0x76 +#define KS_GAMMAD23 0x77 +#define KS_GAMMAD24 0x78 +#define KS_GAMMAD25 0x79 +#define KS_GAMMAD26 0x7a +#define KS_GAMMAD27 0x7b +#define KS_GAMMAD28 0x7c +#define KS_GAMMAD29 0x7d +#define KS_GAMMAD30 0x7e +#define KS_GAMMAD31 0x7f + + +/**************************************************************************** +* mga_dev : represents one ks0127 chip. +****************************************************************************/ + +struct adjust { + int contrast; + int bright; + int hue; + int ugain; + int vgain; +}; + +struct ks0127 { + struct i2c_client *client; + unsigned char addr; + int format_width; + int format_height; + int cap_width; + int cap_height; + int norm; + int ks_type; + u8 regs[256]; +}; + + +static int debug; /* insmod parameter */ + +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug output"); +MODULE_LICENSE("GPL"); + +static u8 reg_defaults[64]; + + + +static void init_reg_defaults(void) +{ + u8 *table = reg_defaults; + + table[KS_CMDA] = 0x2c; /* VSE=0, CCIR 601, autodetect standard */ + table[KS_CMDB] = 0x12; /* VALIGN=0, AGC control and input */ + table[KS_CMDC] = 0x00; /* Test options */ + /* clock & input select, write 1 to PORTA */ + table[KS_CMDD] = 0x01; + table[KS_HAVB] = 0x00; /* HAV Start Control */ + table[KS_HAVE] = 0x00; /* HAV End Control */ + table[KS_HS1B] = 0x10; /* HS1 Start Control */ + table[KS_HS1E] = 0x00; /* HS1 End Control */ + table[KS_HS2B] = 0x00; /* HS2 Start Control */ + table[KS_HS2E] = 0x00; /* HS2 End Control */ + table[KS_AGC] = 0x53; /* Manual setting for AGC */ + table[KS_HXTRA] = 0x00; /* Extra Bits for HAV and HS1/2 */ + table[KS_CDEM] = 0x00; /* Chroma Demodulation Control */ + table[KS_PORTAB] = 0x0f; /* port B is input, port A output GPPORT */ + table[KS_LUMA] = 0x01; /* Luma control */ + table[KS_CON] = 0x00; /* Contrast Control */ + table[KS_BRT] = 0x00; /* Brightness Control */ + table[KS_CHROMA] = 0x2a; /* Chroma control A */ + table[KS_CHROMB] = 0x90; /* Chroma control B */ + table[KS_DEMOD] = 0x00; /* Chroma Demodulation Control & Status */ + table[KS_SAT] = 0x00; /* Color Saturation Control*/ + table[KS_HUE] = 0x00; /* Hue Control */ + table[KS_VERTIA] = 0x00; /* Vertical Processing Control A */ + /* Vertical Processing Control B, luma 1 line delayed */ + table[KS_VERTIB] = 0x12; + table[KS_VERTIC] = 0x0b; /* Vertical Processing Control C */ + table[KS_HSCLL] = 0x00; /* Horizontal Scaling Ratio Low */ + table[KS_HSCLH] = 0x00; /* Horizontal Scaling Ratio High */ + table[KS_VSCLL] = 0x00; /* Vertical Scaling Ratio Low */ + table[KS_VSCLH] = 0x00; /* Vertical Scaling Ratio High */ + /* 16 bit YCbCr 4:2:2 output; I can't make the bt866 like 8 bit /Sam */ + table[KS_OFMTA] = 0x30; + table[KS_OFMTB] = 0x00; /* Output Control B */ + /* VBI Decoder Control; 4bit fmt: avoid Y overflow */ + table[KS_VBICTL] = 0x5d; + table[KS_CCDAT2] = 0x00; /* Read Only register */ + table[KS_CCDAT1] = 0x00; /* Read Only register */ + table[KS_VBIL30] = 0xa8; /* VBI data decoding options */ + table[KS_VBIL74] = 0xaa; /* VBI data decoding options */ + table[KS_VBIL118] = 0x2a; /* VBI data decoding options */ + table[KS_VBIL1512] = 0x00; /* VBI data decoding options */ + table[KS_TTFRAM] = 0x00; /* Teletext frame alignment pattern */ + table[KS_TESTA] = 0x00; /* test register, shouldn't be written */ + table[KS_UVOFFH] = 0x00; /* UV Offset Adjustment High */ + table[KS_UVOFFL] = 0x00; /* UV Offset Adjustment Low */ + table[KS_UGAIN] = 0x00; /* U Component Gain Adjustment */ + table[KS_VGAIN] = 0x00; /* V Component Gain Adjustment */ + table[KS_VAVB] = 0x07; /* VAV Begin */ + table[KS_VAVE] = 0x00; /* VAV End */ + table[KS_CTRACK] = 0x00; /* Chroma Tracking Control */ + table[KS_POLCTL] = 0x41; /* Timing Signal Polarity Control */ + table[KS_REFCOD] = 0x80; /* Reference Code Insertion Control */ + table[KS_INVALY] = 0x10; /* Invalid Y Code */ + table[KS_INVALU] = 0x80; /* Invalid U Code */ + table[KS_INVALV] = 0x80; /* Invalid V Code */ + table[KS_UNUSEY] = 0x10; /* Unused Y Code */ + table[KS_UNUSEU] = 0x80; /* Unused U Code */ + table[KS_UNUSEV] = 0x80; /* Unused V Code */ + table[KS_USRSAV] = 0x00; /* reserved */ + table[KS_USREAV] = 0x00; /* reserved */ + table[KS_SHS1A] = 0x00; /* User Defined SHS1 A */ + /* User Defined SHS1 B, ALT656=1 on 0127B */ + table[KS_SHS1B] = 0x80; + table[KS_SHS1C] = 0x00; /* User Defined SHS1 C */ + table[KS_CMDE] = 0x00; /* Command Register E */ + table[KS_VSDEL] = 0x00; /* VS Delay Control */ + /* Command Register F, update -immediately- */ + /* (there might come no vsync)*/ + table[KS_CMDF] = 0x02; +} + + +/* We need to manually read because of a bug in the KS0127 chip. + * + * An explanation from kayork@mail.utexas.edu: + * + * During I2C reads, the KS0127 only samples for a stop condition + * during the place where the acknoledge bit should be. Any standard + * I2C implementation (correctly) throws in another clock transition + * at the 9th bit, and the KS0127 will not recognize the stop condition + * and will continue to clock out data. + * + * So we have to do the read ourself. Big deal. + workaround in i2c-algo-bit + */ + + +static u8 ks0127_read(struct ks0127 *ks, u8 reg) +{ + struct i2c_client *c = ks->client; + char val = 0; + struct i2c_msg msgs[] = { + {c->addr, 0, sizeof(reg), ®}, + {c->addr, I2C_M_RD | I2C_M_NO_RD_ACK, sizeof(val), &val}}; + int ret; + + ret = i2c_transfer(c->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret != ARRAY_SIZE(msgs)) + dprintk("ks0127_write error\n"); + + return val; +} + + +static void ks0127_write(struct ks0127 *ks, u8 reg, u8 val) +{ + char msg[] = {reg, val}; + + if (i2c_master_send(ks->client, msg, sizeof(msg)) != sizeof(msg)) + dprintk("ks0127_write error\n"); + + ks->regs[reg] = val; +} + + +/* generic bit-twiddling */ +static void ks0127_and_or(struct ks0127 *ks, u8 reg, u8 and_v, u8 or_v) +{ + u8 val = ks->regs[reg]; + val = (val & and_v) | or_v; + ks0127_write(ks, reg, val); +} + + + +/**************************************************************************** +* ks0127 private api +****************************************************************************/ +static void ks0127_reset(struct ks0127* ks) +{ + int i; + u8 *table = reg_defaults; + + ks->ks_type = KS_TYPE_UNKNOWN; + + dprintk("ks0127: reset\n"); + msleep(1); + + /* initialize all registers to known values */ + /* (except STAT, 0x21, 0x22, TEST and 0x38,0x39) */ + + for(i = 1; i < 33; i++) + ks0127_write(ks, i, table[i]); + + for(i = 35; i < 40; i++) + ks0127_write(ks, i, table[i]); + + for(i = 41; i < 56; i++) + ks0127_write(ks, i, table[i]); + + for(i = 58; i < 64; i++) + ks0127_write(ks, i, table[i]); + + + if ((ks0127_read(ks, KS_STAT) & 0x80) == 0) { + ks->ks_type = KS_TYPE_0122S; + dprintk("ks0127: ks0122s Found\n"); + return; + } + + switch(ks0127_read(ks, KS_CMDE) & 0x0f) { + + case 0: + ks->ks_type = KS_TYPE_0127; + dprintk("ks0127: ks0127 found\n"); + break; + + case 9: + ks->ks_type = KS_TYPE_0127B; + dprintk("ks0127: ks0127B Revision A found\n"); + break; + + default: + dprintk("ks0127: unknown revision\n"); + break; + } +} + +static int ks0127_command(struct i2c_client *client, + unsigned int cmd, void *arg) +{ + struct ks0127 *ks = i2c_get_clientdata(client); + + int *iarg = (int*)arg; + + int status; + + if (!ks) + return -ENODEV; + + switch (cmd) { + + case DECODER_INIT: + dprintk("ks0127: command DECODER_INIT\n"); + ks0127_reset(ks); + break; + + case DECODER_SET_INPUT: + switch(*iarg) { + case KS_INPUT_COMPOSITE_1: + case KS_INPUT_COMPOSITE_2: + case KS_INPUT_COMPOSITE_3: + case KS_INPUT_COMPOSITE_4: + case KS_INPUT_COMPOSITE_5: + case KS_INPUT_COMPOSITE_6: + dprintk("ks0127: command DECODER_SET_INPUT %d: " + "Composite\n", *iarg); + /* autodetect 50/60 Hz */ + ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); + /* VSE=0 */ + ks0127_and_or(ks, KS_CMDA, ~0x40, 0x00); + /* set input line */ + ks0127_and_or(ks, KS_CMDB, 0xb0, *iarg); + /* non-freerunning mode */ + ks0127_and_or(ks, KS_CMDC, 0x70, 0x0a); + /* analog input */ + ks0127_and_or(ks, KS_CMDD, 0x03, 0x00); + /* enable chroma demodulation */ + ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x00); + /* chroma trap, HYBWR=1 */ + ks0127_and_or(ks, KS_LUMA, 0x00, + (reg_defaults[KS_LUMA])|0x0c); + /* scaler fullbw, luma comb off */ + ks0127_and_or(ks, KS_VERTIA, 0x08, 0x81); + /* manual chroma comb .25 .5 .25 */ + ks0127_and_or(ks, KS_VERTIC, 0x0f, 0x90); + + /* chroma path delay */ + ks0127_and_or(ks, KS_CHROMB, 0x0f, 0x90); + + ks0127_write(ks, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(ks, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(ks, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(ks, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + break; + + case KS_INPUT_SVIDEO_1: + case KS_INPUT_SVIDEO_2: + case KS_INPUT_SVIDEO_3: + dprintk("ks0127: command DECODER_SET_INPUT %d: " + "S-Video\n", *iarg); + /* autodetect 50/60 Hz */ + ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); + /* VSE=0 */ + ks0127_and_or(ks, KS_CMDA, ~0x40, 0x00); + /* set input line */ + ks0127_and_or(ks, KS_CMDB, 0xb0, *iarg); + /* non-freerunning mode */ + ks0127_and_or(ks, KS_CMDC, 0x70, 0x0a); + /* analog input */ + ks0127_and_or(ks, KS_CMDD, 0x03, 0x00); + /* enable chroma demodulation */ + ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x00); + ks0127_and_or(ks, KS_LUMA, 0x00, + reg_defaults[KS_LUMA]); + /* disable luma comb */ + ks0127_and_or(ks, KS_VERTIA, 0x08, + (reg_defaults[KS_VERTIA]&0xf0)|0x01); + ks0127_and_or(ks, KS_VERTIC, 0x0f, + reg_defaults[KS_VERTIC]&0xf0); + + ks0127_and_or(ks, KS_CHROMB, 0x0f, + reg_defaults[KS_CHROMB]&0xf0); + + ks0127_write(ks, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(ks, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(ks, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(ks, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + break; + + case KS_INPUT_YUV656: + dprintk("ks0127: command DECODER_SET_INPUT 15: " + "YUV656\n"); + if (ks->norm == VIDEO_MODE_NTSC || + ks->norm == KS_STD_PAL_M) + /* force 60 Hz */ + ks0127_and_or(ks, KS_CMDA, 0xfc, 0x03); + else + /* force 50 Hz */ + ks0127_and_or(ks, KS_CMDA, 0xfc, 0x02); + + ks0127_and_or(ks, KS_CMDA, 0xff, 0x40); /* VSE=1 */ + /* set input line and VALIGN */ + ks0127_and_or(ks, KS_CMDB, 0xb0, (*iarg | 0x40)); + /* freerunning mode, */ + /* TSTGEN = 1 TSTGFR=11 TSTGPH=0 TSTGPK=0 VMEM=1*/ + ks0127_and_or(ks, KS_CMDC, 0x70, 0x87); + /* digital input, SYNDIR = 0 INPSL=01 CLKDIR=0 EAV=0 */ + ks0127_and_or(ks, KS_CMDD, 0x03, 0x08); + /* disable chroma demodulation */ + ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x30); + /* HYPK =01 CTRAP = 0 HYBWR=0 PED=1 RGBH=1 UNIT=1 */ + ks0127_and_or(ks, KS_LUMA, 0x00, 0x71); + ks0127_and_or(ks, KS_VERTIC, 0x0f, + reg_defaults[KS_VERTIC]&0xf0); + + /* scaler fullbw, luma comb off */ + ks0127_and_or(ks, KS_VERTIA, 0x08, 0x81); + + ks0127_and_or(ks, KS_CHROMB, 0x0f, + reg_defaults[KS_CHROMB]&0xf0); + + ks0127_and_or(ks, KS_CON, 0x00, 0x00); + ks0127_and_or(ks, KS_BRT, 0x00, 32); /* spec: 34 */ + /* spec: 229 (e5) */ + ks0127_and_or(ks, KS_SAT, 0x00, 0xe8); + ks0127_and_or(ks, KS_HUE, 0x00, 0); + + ks0127_and_or(ks, KS_UGAIN, 0x00, 238); + ks0127_and_or(ks, KS_VGAIN, 0x00, 0x00); + + /*UOFF:0x30, VOFF:0x30, TSTCGN=1 */ + ks0127_and_or(ks, KS_UVOFFH, 0x00, 0x4f); + ks0127_and_or(ks, KS_UVOFFL, 0x00, 0x00); + break; + + default: + dprintk("ks0127: command DECODER_SET_INPUT: " + "Unknown input %d\n", *iarg); + break; + } + + /* hack: CDMLPF sometimes spontaneously switches on; */ + /* force back off */ + ks0127_write(ks, KS_DEMOD, reg_defaults[KS_DEMOD]); + break; + + case DECODER_SET_OUTPUT: + switch(*iarg) { + case KS_OUTPUT_YUV656E: + dprintk("ks0127: command DECODER_SET_OUTPUT: " + "OUTPUT_YUV656E (Missing)\n"); + return -EINVAL; + break; + + case KS_OUTPUT_EXV: + dprintk("ks0127: command DECODER_SET_OUTPUT: " + "OUTPUT_EXV\n"); + ks0127_and_or(ks, KS_OFMTA, 0xf0, 0x09); + break; + } + break; + + case DECODER_SET_NORM: //sam This block mixes old and new norm names... + /* Set to automatic SECAM/Fsc mode */ + ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x00); + + ks->norm = *iarg; + switch(*iarg) + { + /* this is untested !! */ + /* It just detects PAL_N/NTSC_M (no special frequencies) */ + /* And you have to set the standard a second time afterwards */ + case VIDEO_MODE_AUTO: + dprintk("ks0127: command DECODER_SET_NORM: AUTO\n"); + + /* The chip determines the format */ + /* based on the current field rate */ + ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); + ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); + /* This is wrong for PAL ! As I said, */ + /* you need to set the standard once again !! */ + ks->format_height = 240; + ks->format_width = 704; + break; + + case VIDEO_MODE_NTSC: + dprintk("ks0127: command DECODER_SET_NORM: NTSC_M\n"); + ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); + ks->format_height = 240; + ks->format_width = 704; + break; + + case KS_STD_NTSC_N: + dprintk("ks0127: command KS0127_SET_STANDARD: " + "NTSC_N (fixme)\n"); + ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x40); + ks->format_height = 240; + ks->format_width = 704; + break; + + case VIDEO_MODE_PAL: + dprintk("ks0127: command DECODER_SET_NORM: PAL_N\n"); + ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); + ks->format_height = 290; + ks->format_width = 704; + break; + + case KS_STD_PAL_M: + dprintk("ks0127: command KS0127_SET_STANDARD: " + "PAL_M (fixme)\n"); + ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x40); + ks->format_height = 290; + ks->format_width = 704; + break; + + case VIDEO_MODE_SECAM: + dprintk("ks0127: command KS0127_SET_STANDARD: " + "SECAM\n"); + ks->format_height = 290; + ks->format_width = 704; + + /* set to secam autodetection */ + ks0127_and_or(ks, KS_CHROMA, 0xdf, 0x20); + ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x00); + schedule_timeout_interruptible(HZ/10+1); + + /* did it autodetect? */ + if (ks0127_read(ks, KS_DEMOD) & 0x40) + break; + + /* force to secam mode */ + ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x0f); + break; + + default: + dprintk("ks0127: command DECODER_SET_NORM: " + "Unknown norm %d\n", *iarg); + break; + } + break; + + case DECODER_SET_PICTURE: + dprintk("ks0127: command DECODER_SET_PICTURE " + "not yet supported (fixme)\n"); + return -EINVAL; + + //sam todo: KS0127_SET_BRIGHTNESS: Merge into DECODER_SET_PICTURE + //sam todo: KS0127_SET_CONTRAST: Merge into DECODER_SET_PICTURE + //sam todo: KS0127_SET_HUE: Merge into DECODER_SET_PICTURE? + //sam todo: KS0127_SET_SATURATION: Merge into DECODER_SET_PICTURE + //sam todo: KS0127_SET_AGC_MODE: + //sam todo: KS0127_SET_AGC: + //sam todo: KS0127_SET_CHROMA_MODE: + //sam todo: KS0127_SET_PIXCLK_MODE: + //sam todo: KS0127_SET_GAMMA_MODE: + //sam todo: KS0127_SET_UGAIN: + //sam todo: KS0127_SET_VGAIN: + //sam todo: KS0127_SET_INVALY: + //sam todo: KS0127_SET_INVALU: + //sam todo: KS0127_SET_INVALV: + //sam todo: KS0127_SET_UNUSEY: + //sam todo: KS0127_SET_UNUSEU: + //sam todo: KS0127_SET_UNUSEV: + //sam todo: KS0127_SET_VSALIGN_MODE: + + case DECODER_ENABLE_OUTPUT: + { + + int *iarg = arg; + int enable = (*iarg != 0); + if (enable) { + dprintk("ks0127: command " + "DECODER_ENABLE_OUTPUT on " + "(%d)\n", enable); + /* All output pins on */ + ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30); + /* Obey the OEN pin */ + ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00); + } else { + dprintk("ks0127: command " + "DECODER_ENABLE_OUTPUT off " + "(%d)\n", enable); + /* Video output pins off */ + ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00); + /* Ignore the OEN pin */ + ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80); + } + } + break; + + //sam todo: KS0127_SET_OUTPUT_MODE: + //sam todo: KS0127_SET_WIDTH: + //sam todo: KS0127_SET_HEIGHT: + //sam todo: KS0127_SET_HSCALE: + + case DECODER_GET_STATUS: + dprintk("ks0127: command DECODER_GET_STATUS\n"); + *iarg = 0; + status = ks0127_read(ks, KS_STAT); + if (!(status & 0x20)) /* NOVID not set */ + *iarg = (*iarg & DECODER_STATUS_GOOD); + if ((status & 0x01)) /* CLOCK set */ + *iarg = (*iarg & DECODER_STATUS_COLOR); + if ((status & 0x08)) /* PALDET set */ + *iarg = (*iarg & DECODER_STATUS_PAL); + else + *iarg = (*iarg & DECODER_STATUS_NTSC); + break; + + //Catch any unknown command + default: + dprintk("ks0127: command unknown: %04X\n", cmd); + return -EINVAL; + } + return 0; +} + + + + +static int ks0127_probe(struct i2c_adapter *adapter); +static int ks0127_detach(struct i2c_client *client); +static int ks0127_command(struct i2c_client *client, + unsigned int cmd, void *arg); + + + +/* Addresses to scan */ +static unsigned short normal_i2c[] = {I2C_KS0127_ADDON>>1, + I2C_KS0127_ONBOARD>>1, I2C_CLIENT_END}; +static unsigned short probe[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; +static unsigned short ignore[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; +static struct i2c_client_address_data addr_data = { + normal_i2c, + probe, + ignore, +}; + +static struct i2c_driver i2c_driver_ks0127 = { + .driver.name = "ks0127", + .id = I2C_DRIVERID_KS0127, + .attach_adapter = ks0127_probe, + .detach_client = ks0127_detach, + .command = ks0127_command +}; + +static struct i2c_client ks0127_client_tmpl = +{ + .name = "(ks0127 unset)", + .addr = 0, + .adapter = NULL, + .driver = &i2c_driver_ks0127, + .usage_count = 0 +}; + +static int ks0127_found_proc(struct i2c_adapter *adapter, int addr, int kind) +{ + struct ks0127 *ks; + struct i2c_client *client; + + client = kzalloc(sizeof(*client), GFP_KERNEL); + if (client == NULL) + return -ENOMEM; + memcpy(client, &ks0127_client_tmpl, sizeof(*client)); + + ks = kzalloc(sizeof(*ks), GFP_KERNEL); + if (ks == NULL) { + kfree(client); + return -ENOMEM; + } + + i2c_set_clientdata(client, ks); + client->adapter = adapter; + client->addr = addr; + sprintf(client->name, "ks0127-%02x", adapter->id); + + ks->client = client; + ks->addr = addr; + ks->ks_type = KS_TYPE_UNKNOWN; + + /* power up */ + ks0127_write(ks, KS_CMDA, 0x2c); + mdelay(10); + + /* reset the device */ + ks0127_reset(ks); + printk(KERN_INFO "ks0127: attach: %s video decoder\n", + ks->addr==(I2C_KS0127_ADDON>>1) ? "addon" : "on-board"); + + i2c_attach_client(client); + return 0; +} + + +static int ks0127_probe(struct i2c_adapter *adapter) +{ + if (adapter->id == I2C_HW_B_ZR36067) + return i2c_probe(adapter, &addr_data, ks0127_found_proc); + return 0; +} + +static int ks0127_detach(struct i2c_client *client) +{ + struct ks0127 *ks = i2c_get_clientdata(client); + + ks0127_write(ks, KS_OFMTA, 0x20); /*tristate*/ + ks0127_write(ks, KS_CMDA, 0x2c | 0x80); /* power down */ + + i2c_detach_client(client); + kfree(ks); + kfree(client); + + dprintk("ks0127: detach\n"); + return 0; +} + + +static int __devinit ks0127_init_module(void) +{ + init_reg_defaults(); + i2c_add_driver(&i2c_driver_ks0127); + return 0; +} + +static void __devexit ks0127_cleanup_module(void) +{ + i2c_del_driver(&i2c_driver_ks0127); +} + + +module_init(ks0127_init_module); +module_exit(ks0127_cleanup_module); diff --git a/linux/drivers/media/video/ks0127.h b/linux/drivers/media/video/ks0127.h new file mode 100644 index 000000000..841717a21 --- /dev/null +++ b/linux/drivers/media/video/ks0127.h @@ -0,0 +1,54 @@ +/* + * Video Capture Driver ( Video for Linux 1/2 ) + * for the Matrox Marvel G200,G400 and Rainbow Runner-G series + * + * This module is an interface to the KS0127 video decoder chip. + * + * Copyright (C) 1999 Ryan Drake <stiletto@mediaone.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef KS0127_H +#define KS0127_H + +#include "compat.h" +#include <linux/videodev.h> + +/* input channels */ +#define KS_INPUT_COMPOSITE_1 0 +#define KS_INPUT_COMPOSITE_2 1 +#define KS_INPUT_COMPOSITE_3 2 +#define KS_INPUT_COMPOSITE_4 4 +#define KS_INPUT_COMPOSITE_5 5 +#define KS_INPUT_COMPOSITE_6 6 + +#define KS_INPUT_SVIDEO_1 8 +#define KS_INPUT_SVIDEO_2 9 +#define KS_INPUT_SVIDEO_3 10 + +#define KS_INPUT_YUV656 15 +#define KS_INPUT_COUNT 10 + +/* output channels */ +#define KS_OUTPUT_YUV656E 0 +#define KS_OUTPUT_EXV 1 + +/* video standards */ +#define KS_STD_NTSC_N 112 /* 50 Hz NTSC */ +#define KS_STD_PAL_M 113 /* 60 Hz PAL */ + +#endif /* KS0127_H */ + diff --git a/linux/drivers/media/video/saa7134/saa7134-dvb.c b/linux/drivers/media/video/saa7134/saa7134-dvb.c index b659b96e5..ea0a1290d 100644 --- a/linux/drivers/media/video/saa7134/saa7134-dvb.c +++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c @@ -151,9 +151,13 @@ static int mt352_pinnacle_tuner_calc_regs(struct dvb_frontend* fe, f.tuner = 0; f.type = V4L2_TUNER_DIGITAL_TV; f.frequency = params->frequency / 1000 * 16 / 1000; + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); i2c_transfer(&dev->i2c_adap, &msg, 1); saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f); msg.buf = on; + if (fe->ops->i2c_gate_ctrl) + fe->ops->i2c_gate_ctrl(fe, 1); i2c_transfer(&dev->i2c_adap, &msg, 1); pinnacle_antenna_pwr(dev, antenna_pwr); diff --git a/linux/drivers/media/video/tuner-core.c b/linux/drivers/media/video/tuner-core.c index 689f7b043..00e073944 100644 --- a/linux/drivers/media/video/tuner-core.c +++ b/linux/drivers/media/video/tuner-core.c @@ -227,7 +227,7 @@ static void set_type(struct i2c_client *c, unsigned int type, i2c_master_send(c, buffer, 4); default_tuner_init(c); break; - case TUNER_LG_TDVS_H062F: + case TUNER_LG_TDVS_H06XF: /* Set the Auxiliary Byte. */ buffer[2] &= ~0x20; buffer[2] |= 0x18; diff --git a/linux/drivers/media/video/tuner-types.c b/linux/drivers/media/video/tuner-types.c index f1d3a7556..4657df313 100644 --- a/linux/drivers/media/video/tuner-types.c +++ b/linux/drivers/media/video/tuner-types.c @@ -900,7 +900,7 @@ static struct tuner_params tuner_philips_fmd1216me_mk3_params[] = { }; -/* ------------ TUNER_LG_TDVS_H062F - INFINEON ATSC ------------ */ +/* ------ TUNER_LG_TDVS_H06XF - LG INNOTEK / INFINEON ATSC ----- */ static struct tuner_range tuner_tua6034_ntsc_ranges[] = { { 16 * 165.00 /*MHz*/, 0x8e, 0x01 }, @@ -913,7 +913,7 @@ static struct tuner_range tuner_tua6034_atsc_ranges[] = { }; #endif -static struct tuner_params tuner_tua6034_params[] = { +static struct tuner_params tuner_lg_tdvs_h06xf_params[] = { { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_tua6034_ntsc_ranges, @@ -1418,10 +1418,10 @@ struct tunertype tuners[] = { .params = tuner_philips_fmd1216me_mk3_params, .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_params), }, - [TUNER_LG_TDVS_H062F] = { /* LGINNOTEK ATSC */ + [TUNER_LG_TDVS_H06XF] = { /* LGINNOTEK ATSC */ .name = "LG TDVS-H06xF", /* H061F, H062F & H064F */ - .params = tuner_tua6034_params, - .count = ARRAY_SIZE(tuner_tua6034_params), + .params = tuner_lg_tdvs_h06xf_params, + .count = ARRAY_SIZE(tuner_lg_tdvs_h06xf_params), }, [TUNER_YMEC_TVF66T5_B_DFF] = { /* Philips PAL */ .name = "Ymec TVF66T5-B/DFF", diff --git a/linux/drivers/media/video/vivi.c b/linux/drivers/media/video/vivi.c index 843fdecbc..170712515 100644 --- a/linux/drivers/media/video/vivi.c +++ b/linux/drivers/media/video/vivi.c @@ -26,6 +26,7 @@ #include <linux/random.h> #include <linux/version.h> #include <linux/videodev2.h> +#include <linux/dma-mapping.h> #ifdef CONFIG_VIDEO_V4L1_COMPAT /* Include V4L1 specific functions. Should be removed soon */ #include <linux/videodev.h> @@ -49,16 +50,6 @@ #include "font.h" -#ifndef kzalloc -#define kzalloc(size, flags) \ -({ \ - void *__ret = kmalloc(size, flags); \ - if (__ret) \ - memset(__ret, 0, size); \ - __ret; \ -}) -#endif - MODULE_DESCRIPTION("Video Technology Magazine Virtual Video Capture Board"); MODULE_AUTHOR("Mauro Carvalho Chehab, Ted Walther and John Sokol"); MODULE_LICENSE("Dual BSD/GPL"); @@ -253,7 +244,8 @@ static u8 bars[8][3] = { #define TSTAMP_MAX_Y TSTAMP_MIN_Y+15 #define TSTAMP_MIN_X 64 -void prep_to_addr(struct sg_to_addr to_addr[],struct videobuf_buffer *vb) +static void prep_to_addr(struct sg_to_addr to_addr[], + struct videobuf_buffer *vb) { int i, pos=0; @@ -264,7 +256,7 @@ void prep_to_addr(struct sg_to_addr to_addr[],struct videobuf_buffer *vb) } } -inline int get_addr_pos(int pos, int pages, struct sg_to_addr to_addr[]) +static int get_addr_pos(int pos, int pages, struct sg_to_addr to_addr[]) { int p1=0,p2=pages-1,p3=pages/2; @@ -285,8 +277,8 @@ inline int get_addr_pos(int pos, int pages, struct sg_to_addr to_addr[]) return (p1); } -void gen_line(struct sg_to_addr to_addr[],int inipos,int pages,int wmax, - int hmax, int line, char *timestr) +static void gen_line(struct sg_to_addr to_addr[],int inipos,int pages,int wmax, + int hmax, int line, char *timestr) { int w,i,j,pos=inipos,pgpos,oldpg,y; char *p,*s,*basep; @@ -508,7 +500,7 @@ static void vivi_thread_tick(struct vivi_dmaqueue *dma_q) dprintk(1,"%s: %d buffers handled (should be 1)\n",__FUNCTION__,bc); } -void vivi_sleep(struct vivi_dmaqueue *dma_q) +static void vivi_sleep(struct vivi_dmaqueue *dma_q) { int timeout; DECLARE_WAITQUEUE(wait, current); @@ -559,7 +551,7 @@ void vivi_sleep(struct vivi_dmaqueue *dma_q) #endif } -int vivi_thread(void *data) +static int vivi_thread(void *data) { struct vivi_dmaqueue *dma_q=data; @@ -599,7 +591,7 @@ int vivi_thread(void *data) return 0; } -int vivi_start_thread(struct vivi_dmaqueue *dma_q) +static int vivi_start_thread(struct vivi_dmaqueue *dma_q) { dma_q->frame=0; dma_q->ini_jiffies=jiffies; @@ -627,7 +619,7 @@ int vivi_start_thread(struct vivi_dmaqueue *dma_q) return 0; } -void vivi_stop_thread(struct vivi_dmaqueue *dma_q) +static void vivi_stop_thread(struct vivi_dmaqueue *dma_q) { dprintk(1,"%s\n",__FUNCTION__); /* shutdown control thread */ @@ -745,8 +737,7 @@ buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size) return 0; } -void -free_buffer(struct videobuf_queue *vq, struct vivi_buffer *buf) +static void free_buffer(struct videobuf_queue *vq, struct vivi_buffer *buf) { dprintk(1,"%s\n",__FUNCTION__); @@ -870,8 +861,8 @@ static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb free_buffer(vq,buf); } -int vivi_map_sg (void *dev, struct scatterlist *sg, int nents, - int direction) +static int vivi_map_sg(void *dev, struct scatterlist *sg, int nents, + int direction) { int i; @@ -887,15 +878,15 @@ int vivi_map_sg (void *dev, struct scatterlist *sg, int nents, return nents; } -int vivi_unmap_sg(void *dev,struct scatterlist *sglist,int nr_pages, - int direction) +static int vivi_unmap_sg(void *dev,struct scatterlist *sglist,int nr_pages, + int direction) { dprintk(1,"%s\n",__FUNCTION__); return 0; } -int vivi_dma_sync_sg(void *dev,struct scatterlist *sglist,int nr_pages, - int direction) +static int vivi_dma_sync_sg(void *dev,struct scatterlist *sglist, int nr_pages, + int direction) { // dprintk(1,"%s\n",__FUNCTION__); @@ -979,7 +970,7 @@ static int res_get(struct vivi_dev *dev, struct vivi_fh *fh) return 1; } -static inline int res_locked(struct vivi_dev *dev) +static int res_locked(struct vivi_dev *dev) { return (dev->resources); } diff --git a/linux/drivers/media/video/zc0301/zc0301_core.c b/linux/drivers/media/video/zc0301/zc0301_core.c index 7b7a3629b..2b5ce2d79 100644 --- a/linux/drivers/media/video/zc0301/zc0301_core.c +++ b/linux/drivers/media/video/zc0301/zc0301_core.c @@ -1,5 +1,5 @@ /*************************************************************************** - * Video4Linux2 driver for ZC0301 Image Processor and Control Chip * + * Video4Linux2 driver for ZC0301[P] Image Processor and Control Chip * * * * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * * * @@ -47,13 +47,13 @@ /*****************************************************************************/ -#define ZC0301_MODULE_NAME "V4L2 driver for ZC0301 " \ +#define ZC0301_MODULE_NAME "V4L2 driver for ZC0301[P] " \ "Image Processor and Control Chip" #define ZC0301_MODULE_AUTHOR "(C) 2006 Luca Risolia" #define ZC0301_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" #define ZC0301_MODULE_LICENSE "GPL" -#define ZC0301_MODULE_VERSION "1:1.04" -#define ZC0301_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 4) +#define ZC0301_MODULE_VERSION "1:1.05" +#define ZC0301_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 5) /*****************************************************************************/ @@ -427,10 +427,11 @@ resubmit_urb: static int zc0301_start_transfer(struct zc0301_device* cam) { struct usb_device *udev = cam->usbdev; + struct usb_host_interface* altsetting = usb_altnum_to_altsetting( + usb_ifnum_to_if(udev, 0), + ZC0301_ALTERNATE_SETTING); + const unsigned int psz = altsetting->endpoint[0].desc.wMaxPacketSize; struct urb* urb; - const unsigned int wMaxPacketSize[] = {0, 128, 192, 256, 384, - 512, 768, 1023}; - const unsigned int psz = wMaxPacketSize[ZC0301_ALTERNATE_SETTING]; s8 i, j; int err = 0; @@ -1914,7 +1915,7 @@ zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) mutex_init(&cam->dev_mutex); - DBG(2, "ZC0301 Image Processor and Control Chip detected " + DBG(2, "ZC0301[P] Image Processor and Control Chip detected " "(vid/pid 0x%04X/0x%04X)",id->idVendor, id->idProduct); for (i = 0; zc0301_sensor_table[i]; i++) { @@ -1936,7 +1937,7 @@ zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) cam->state |= DEV_MISCONFIGURED; } - strcpy(cam->v4ldev->name, "ZC0301 PC Camera"); + strcpy(cam->v4ldev->name, "ZC0301[P] PC Camera"); cam->v4ldev->owner = THIS_MODULE; cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES; cam->v4ldev->hardware = 0; diff --git a/linux/drivers/media/video/zoran.h b/linux/drivers/media/video/zoran.h index 0dc51a46c..19c6e3aa0 100644 --- a/linux/drivers/media/video/zoran.h +++ b/linux/drivers/media/video/zoran.h @@ -159,7 +159,7 @@ Private IOCTL to set up for displaying MJPEG #define BUZ_MAX_FRAME 256 /* Must be a power of 2 */ #define BUZ_MASK_FRAME 255 /* Must be BUZ_MAX_FRAME-1 */ -#define BUZ_MAX_INPUT 8 +#define BUZ_MAX_INPUT 16 #if VIDEO_MAX_FRAME <= 32 # define V4L_MAX_FRAME 32 @@ -191,6 +191,9 @@ enum card_type { /* Iomega */ BUZ, + /* AverMedia */ + AVS6EYES, + /* total number of cards */ NUM_CARDS }; @@ -379,6 +382,9 @@ struct card_info { /* is the /GWS line conected? */ u8 gws_not_connected; + /* avs6eyes mux setting */ + u8 input_mux; + void (*init) (struct zoran * zr); }; diff --git a/linux/drivers/media/video/zoran_card.c b/linux/drivers/media/video/zoran_card.c index a55bd31ea..cc52eb745 100644 --- a/linux/drivers/media/video/zoran_card.c +++ b/linux/drivers/media/video/zoran_card.c @@ -27,6 +27,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/delay.h> + #include <linux/config.h> #include <linux/types.h> #include <linux/kernel.h> @@ -96,6 +98,11 @@ module_param(default_input, int, 0); MODULE_PARM_DESC(default_input, "Default input (0=Composite, 1=S-Video, 2=Internal)"); +static int default_mux = 1; /* 6 Eyes input selection */ +module_param(default_mux, int, 0); +MODULE_PARM_DESC(default_mux, + "Default 6 Eyes mux setting (Input selection)"); + static int default_norm = 0; /* 0=PAL, 1=NTSC 2=SECAM */ module_param(default_norm, int, 0); MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)"); @@ -304,6 +311,30 @@ lml33_init (struct zoran *zr) GPIO(zr, 2, 1); // Set Composite input/output } +static void +avs6eyes_init (struct zoran *zr) +{ + // AverMedia 6-Eyes original driver by Christer Weinigel + + // Lifted straight from Christer's old driver and + // modified slightly by Martin Samuelsson. + + int mux = default_mux; /* 1 = BT866, 7 = VID1 */ + + GPIO(zr, 4, 1); /* Bt866 SLEEP on */ + udelay(2); + + GPIO(zr, 0, 1); /* ZR36060 /RESET on */ + GPIO(zr, 1, 0); /* ZR36060 /SLEEP on */ + GPIO(zr, 2, mux & 1); /* MUX S0 */ + GPIO(zr, 3, 0); /* /FRAME on */ + GPIO(zr, 4, 0); /* Bt866 SLEEP off */ + GPIO(zr, 5, mux & 2); /* MUX S1 */ + GPIO(zr, 6, 0); /* ? */ + GPIO(zr, 7, mux & 4); /* MUX S2 */ + +} + static char * i2cid_to_modulename (u16 i2c_id) { @@ -394,6 +425,14 @@ static struct tvnorm f60sqpixel_dc10 = { 780, 640, 0, 716, 525, 480, 12 }; static struct tvnorm f50ccir601_lm33r10 = { 864, 720, 74+54, 804, 625, 576, 18 }; static struct tvnorm f60ccir601_lm33r10 = { 858, 720, 56+54, 788, 525, 480, 16 }; +/* FIXME: The ks0127 seem incapable of swapping U and V, too, which is why I + * copy Maxim's left shift hack for the 6 Eyes. + * + * Christer's driver used the unshifted norms, though... + * /Sam */ +static struct tvnorm f50ccir601_avs6eyes = { 864, 720, 74, 804, 625, 576, 18 }; +static struct tvnorm f60ccir601_avs6eyes = { 858, 720, 56, 788, 525, 480, 16 }; + static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { { .type = DC10_old, @@ -422,6 +461,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { -1, 0 }, .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, .gws_not_connected = 0, + .input_mux = 0, .init = &dc10_init, }, { .type = DC10_new, @@ -448,6 +488,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { -1, 1}, .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 }, .gws_not_connected = 0, + .input_mux = 0, .init = &dc10plus_init, }, { .type = DC10plus, @@ -477,6 +518,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { -1, 1 }, .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 }, .gws_not_connected = 0, + .input_mux = 0, .init = &dc10plus_init, }, { .type = DC30, @@ -505,6 +547,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { -1, 0 }, .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, .gws_not_connected = 0, + .input_mux = 0, .init = &dc10_init, }, { .type = DC30plus, @@ -535,6 +578,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { -1, 0 }, .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, .gws_not_connected = 0, + .input_mux = 0, .init = &dc10_init, }, { .type = LML33, @@ -561,6 +605,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { 3, 1 }, .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, .gws_not_connected = 1, + .input_mux = 0, .init = &lml33_init, }, { .type = LML33R10, @@ -589,6 +634,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { 3, 1 }, .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, .gws_not_connected = 1, + .input_mux = 0, .init = &lml33_init, }, { .type = BUZ, @@ -617,8 +663,49 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { .gpcs = { 3, 1 }, .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, .gws_not_connected = 1, + .input_mux = 0, .init = &buz_init, + }, { + .type = AVS6EYES, + .name = "6-Eyes", + /* AverMedia chose not to brand the 6-Eyes. Thus it + can't be autodetected, and requires card=x. */ + .vendor_id = -1, + .device_id = -1, + .i2c_decoder = I2C_DRIVERID_KS0127, + .i2c_encoder = I2C_DRIVERID_BT866, + .video_codec = CODEC_TYPE_ZR36060, + + .inputs = 10, + .input = { + { 0, "Composite 1" }, + { 1, "Composite 2" }, + { 2, "Composite 3" }, + { 4, "Composite 4" }, + { 5, "Composite 5" }, + { 6, "Composite 6" }, + { 8, "S-Video 1" }, + { 9, "S-Video 2" }, + {10, "S-Video 3" }, + {15, "YCbCr" } + }, + .norms = 2, + .tvn = { + &f50ccir601_avs6eyes, + &f60ccir601_avs6eyes, + NULL + }, + .jpeg_int = ZR36057_ISR_GIRQ1, + .vsync_int = ZR36057_ISR_GIRQ0, + .gpio = { 1, 0, 3, -1, -1, -1, -1, -1 },// Validity unknown /Sam + .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, // Validity unknown /Sam + .gpcs = { 3, 1 }, // Validity unknown /Sam + .vfe_pol = { 1, 0, 0, 0, 0, 1, 0, 0 }, // Validity unknown /Sam + .gws_not_connected = 1, + .input_mux = 1, + .init = &avs6eyes_init, } + }; /* |