diff options
Diffstat (limited to 'linux')
27 files changed, 1057 insertions, 314 deletions
diff --git a/linux/Documentation/video4linux/CARDLIST.em28xx b/linux/Documentation/video4linux/CARDLIST.em28xx index 873630e7e..014d25523 100644 --- a/linux/Documentation/video4linux/CARDLIST.em28xx +++ b/linux/Documentation/video4linux/CARDLIST.em28xx @@ -66,3 +66,4 @@ 68 -> Terratec AV350 (em2860) [0ccd:0084] 69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313] 70 -> Evga inDtube (em2882) + 71 -> Silvercrest Webcam 1.3mpix (em2820/em2840) diff --git a/linux/drivers/media/common/tuners/tuner-xc2028.c b/linux/drivers/media/common/tuners/tuner-xc2028.c index a7466867c..8ead0e1e1 100644 --- a/linux/drivers/media/common/tuners/tuner-xc2028.c +++ b/linux/drivers/media/common/tuners/tuner-xc2028.c @@ -1100,8 +1100,19 @@ static int xc2028_set_params(struct dvb_frontend *fe, } /* All S-code tables need a 200kHz shift */ - if (priv->ctrl.demod) + if (priv->ctrl.demod) { demod = priv->ctrl.demod + 200; + /* + * The DTV7 S-code table needs a 700 kHz shift. + * Thanks to Terry Wu <terrywu2009@gmail.com> for reporting this + * + * DTV7 is only used in Australia. Germany or Italy may also + * use this firmware after initialization, but a tune to a UHF + * channel should then cause DTV78 to be used. + */ + if (type & DTV7) + demod += 500; + } return generic_set_freq(fe, p->frequency, T_DIGITAL_TV, type, 0, demod); diff --git a/linux/drivers/media/dvb/ttpci/Kconfig b/linux/drivers/media/dvb/ttpci/Kconfig index 68eb4493f..d8d4214fd 100644 --- a/linux/drivers/media/dvb/ttpci/Kconfig +++ b/linux/drivers/media/dvb/ttpci/Kconfig @@ -1,5 +1,6 @@ config TTPCI_EEPROM tristate + depends on I2C default n config DVB_AV7110 diff --git a/linux/drivers/media/radio/radio-si470x.c b/linux/drivers/media/radio/radio-si470x.c index 101ede1cf..de4673b3a 100644 --- a/linux/drivers/media/radio/radio-si470x.c +++ b/linux/drivers/media/radio/radio-si470x.c @@ -106,20 +106,24 @@ * Tobias Lorenz <tobias.lorenz@gmx.net> * - add LED status output * - get HW/SW version from scratchpad + * 2009-06-16 Edouard Lafargue <edouard@lafargue.name> + * Version 1.0.10 + * - add support for interrupt mode for RDS endpoint, + * instead of polling. + * Improves RDS reception significantly * * ToDo: * - add firmware download/update support - * - RDS support: interrupt mode, instead of polling */ /* driver definitions */ #define DRIVER_AUTHOR "Tobias Lorenz <tobias.lorenz@gmx.net>" #define DRIVER_NAME "radio-si470x" -#define DRIVER_KERNEL_VERSION KERNEL_VERSION(1, 0, 9) +#define DRIVER_KERNEL_VERSION KERNEL_VERSION(1, 0, 10) #define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver" #define DRIVER_DESC "USB radio driver for Si470x FM Radio Receivers" -#define DRIVER_VERSION "1.0.9" +#define DRIVER_VERSION "1.0.10" /* kernel includes */ @@ -218,16 +222,6 @@ static unsigned short max_rds_errors = 1; module_param(max_rds_errors, ushort, 0644); MODULE_PARM_DESC(max_rds_errors, "RDS maximum block errors: *1*"); -/* RDS poll frequency */ -static unsigned int rds_poll_time = 40; -/* 40 is used by the original USBRadio.exe */ -/* 50 is used by radio-cadet */ -/* 75 should be okay */ -/* 80 is the usual RDS receive interval */ -module_param(rds_poll_time, uint, 0644); -MODULE_PARM_DESC(rds_poll_time, "RDS poll time (ms): *40*"); - - /************************************************************************** * Register Definitions @@ -450,6 +444,12 @@ struct si470x_device { struct usb_interface *intf; struct video_device *videodev; + /* Interrupt endpoint handling */ + char *int_in_buffer; + struct usb_endpoint_descriptor *int_in_endpoint; + struct urb *int_in_urb; + int int_in_running; + /* driver management */ unsigned int users; unsigned char disconnected; @@ -459,7 +459,6 @@ struct si470x_device { unsigned short registers[RADIO_REGISTER_NUM]; /* RDS receive buffer */ - struct delayed_work work; wait_queue_head_t read_queue; struct mutex lock; /* buffer locking */ unsigned char *buffer; /* size is always multiple of three */ @@ -865,43 +864,6 @@ static int si470x_get_all_registers(struct si470x_device *radio) /************************************************************************** - * General Driver Functions - RDS_REPORT - **************************************************************************/ - -/* - * si470x_get_rds_registers - read rds registers - */ -static int si470x_get_rds_registers(struct si470x_device *radio) -{ - unsigned char buf[RDS_REPORT_SIZE]; - int retval; - int size; - unsigned char regnr; - - buf[0] = RDS_REPORT; - - retval = usb_interrupt_msg(radio->usbdev, - usb_rcvintpipe(radio->usbdev, 1), - (void *) &buf, sizeof(buf), &size, usb_timeout); - if (size != sizeof(buf)) - printk(KERN_WARNING DRIVER_NAME ": si470x_get_rds_registers: " - "return size differs: %d != %zu\n", size, sizeof(buf)); - if (retval < 0) - printk(KERN_WARNING DRIVER_NAME ": si470x_get_rds_registers: " - "usb_interrupt_msg returned %d\n", retval); - - if (retval >= 0) - for (regnr = 0; regnr < RDS_REGISTER_NUM; regnr++) - radio->registers[STATUSRSSI + regnr] = - get_unaligned_be16( - &buf[regnr * RADIO_REGISTER_SIZE + 1]); - - return (retval < 0) ? -EINVAL : 0; -} - - - -/************************************************************************** * General Driver Functions - LED_REPORT **************************************************************************/ @@ -959,102 +921,118 @@ static int si470x_get_scratch_page_versions(struct si470x_device *radio) **************************************************************************/ /* - * si470x_rds - rds processing function + * si470x_int_in_callback - rds callback and processing function + * + * TODO: do we need to use mutex locks in some sections? */ -static void si470x_rds(struct si470x_device *radio) +static void si470x_int_in_callback(struct urb *urb) { + struct si470x_device *radio = urb->context; + unsigned char buf[RDS_REPORT_SIZE]; + int retval; + unsigned char regnr; unsigned char blocknum; unsigned short bler; /* rds block errors */ unsigned short rds; unsigned char tmpbuf[3]; - /* get rds blocks */ - if (si470x_get_rds_registers(radio) < 0) - return; - if ((radio->registers[STATUSRSSI] & STATUSRSSI_RDSR) == 0) { - /* No RDS group ready */ - return; - } - if ((radio->registers[STATUSRSSI] & STATUSRSSI_RDSS) == 0) { - /* RDS decoder not synchronized */ - return; - } - - /* copy all four RDS blocks to internal buffer */ - mutex_lock(&radio->lock); - for (blocknum = 0; blocknum < 4; blocknum++) { - switch (blocknum) { - default: - bler = (radio->registers[STATUSRSSI] & - STATUSRSSI_BLERA) >> 9; - rds = radio->registers[RDSA]; - break; - case 1: - bler = (radio->registers[READCHAN] & - READCHAN_BLERB) >> 14; - rds = radio->registers[RDSB]; - break; - case 2: - bler = (radio->registers[READCHAN] & - READCHAN_BLERC) >> 12; - rds = radio->registers[RDSC]; - break; - case 3: - bler = (radio->registers[READCHAN] & - READCHAN_BLERD) >> 10; - rds = radio->registers[RDSD]; - break; - }; - - /* Fill the V4L2 RDS buffer */ - put_unaligned_le16(rds, &tmpbuf); - tmpbuf[2] = blocknum; /* offset name */ - tmpbuf[2] |= blocknum << 3; /* received offset */ - if (bler > max_rds_errors) - tmpbuf[2] |= 0x80; /* uncorrectable errors */ - else if (bler > 0) - tmpbuf[2] |= 0x40; /* corrected error(s) */ - - /* copy RDS block to internal buffer */ - memcpy(&radio->buffer[radio->wr_index], &tmpbuf, 3); - radio->wr_index += 3; - - /* wrap write pointer */ - if (radio->wr_index >= radio->buf_size) - radio->wr_index = 0; - - /* check for overflow */ - if (radio->wr_index == radio->rd_index) { - /* increment and wrap read pointer */ - radio->rd_index += 3; - if (radio->rd_index >= radio->buf_size) - radio->rd_index = 0; + if (urb->status) { + if (urb->status == -ENOENT || + urb->status == -ECONNRESET || + urb->status == -ESHUTDOWN) { + return; + } else { + printk(KERN_WARNING DRIVER_NAME + ": non-zero urb status (%d)\n", urb->status); + goto resubmit; /* Maybe we can recover. */ } } - mutex_unlock(&radio->lock); - - /* wake up read queue */ - if (radio->wr_index != radio->rd_index) - wake_up_interruptible(&radio->read_queue); -} - - -/* - * si470x_work - rds work function - */ -static void si470x_work(struct work_struct *work) -{ - struct si470x_device *radio = container_of(work, struct si470x_device, - work.work); /* safety checks */ if (radio->disconnected) return; if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0) - return; + goto resubmit; + + if (urb->actual_length > 0) { + /* Update RDS registers with URB data */ + buf[0] = RDS_REPORT; + for (regnr = 0; regnr < RDS_REGISTER_NUM; regnr++) + radio->registers[STATUSRSSI + regnr] = + get_unaligned_be16(&radio->int_in_buffer[ + regnr * RADIO_REGISTER_SIZE + 1]); + /* get rds blocks */ + if ((radio->registers[STATUSRSSI] & STATUSRSSI_RDSR) == 0) { + /* No RDS group ready, better luck next time */ + goto resubmit; + } + if ((radio->registers[STATUSRSSI] & STATUSRSSI_RDSS) == 0) { + /* RDS decoder not synchronized */ + goto resubmit; + } + for (blocknum = 0; blocknum < 4; blocknum++) { + switch (blocknum) { + default: + bler = (radio->registers[STATUSRSSI] & + STATUSRSSI_BLERA) >> 9; + rds = radio->registers[RDSA]; + break; + case 1: + bler = (radio->registers[READCHAN] & + READCHAN_BLERB) >> 14; + rds = radio->registers[RDSB]; + break; + case 2: + bler = (radio->registers[READCHAN] & + READCHAN_BLERC) >> 12; + rds = radio->registers[RDSC]; + break; + case 3: + bler = (radio->registers[READCHAN] & + READCHAN_BLERD) >> 10; + rds = radio->registers[RDSD]; + break; + }; + + /* Fill the V4L2 RDS buffer */ + put_unaligned_le16(rds, &tmpbuf); + tmpbuf[2] = blocknum; /* offset name */ + tmpbuf[2] |= blocknum << 3; /* received offset */ + if (bler > max_rds_errors) + tmpbuf[2] |= 0x80; /* uncorrectable errors */ + else if (bler > 0) + tmpbuf[2] |= 0x40; /* corrected error(s) */ + + /* copy RDS block to internal buffer */ + memcpy(&radio->buffer[radio->wr_index], &tmpbuf, 3); + radio->wr_index += 3; + + /* wrap write pointer */ + if (radio->wr_index >= radio->buf_size) + radio->wr_index = 0; + + /* check for overflow */ + if (radio->wr_index == radio->rd_index) { + /* increment and wrap read pointer */ + radio->rd_index += 3; + if (radio->rd_index >= radio->buf_size) + radio->rd_index = 0; + } + } + if (radio->wr_index != radio->rd_index) + wake_up_interruptible(&radio->read_queue); + } - si470x_rds(radio); - schedule_delayed_work(&radio->work, msecs_to_jiffies(rds_poll_time)); +resubmit: + /* Resubmit if we're still running. */ + if (radio->int_in_running && radio->usbdev) { + retval = usb_submit_urb(radio->int_in_urb, GFP_ATOMIC); + if (retval) { + printk(KERN_WARNING DRIVER_NAME + ": resubmitting urb failed (%d)", retval); + radio->int_in_running = 0; + } + } } @@ -1076,8 +1054,6 @@ static ssize_t si470x_fops_read(struct file *file, char __user *buf, /* switch on rds reception */ if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0) { si470x_rds_on(radio); - schedule_delayed_work(&radio->work, - msecs_to_jiffies(rds_poll_time)); } /* block if no new data available */ @@ -1136,8 +1112,6 @@ static unsigned int si470x_fops_poll(struct file *file, /* switch on rds reception */ if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0) { si470x_rds_on(radio); - schedule_delayed_work(&radio->work, - msecs_to_jiffies(rds_poll_time)); } poll_wait(file, &radio->read_queue, pts); @@ -1170,8 +1144,31 @@ static int si470x_fops_open(struct file *file) if (radio->users == 1) { /* start radio */ retval = si470x_start(radio); - if (retval < 0) + if (retval < 0) { + usb_autopm_put_interface(radio->intf); + goto done; + } + + /* initialize interrupt urb */ + usb_fill_int_urb(radio->int_in_urb, radio->usbdev, + usb_rcvintpipe(radio->usbdev, + radio->int_in_endpoint->bEndpointAddress), + radio->int_in_buffer, + le16_to_cpu(radio->int_in_endpoint->wMaxPacketSize), + si470x_int_in_callback, + radio, + radio->int_in_endpoint->bInterval); + + radio->int_in_running = 1; + mb(); + + retval = usb_submit_urb(radio->int_in_urb, GFP_KERNEL); + if (retval) { + printk(KERN_INFO DRIVER_NAME + ": submitting int urb failed (%d)\n", retval); + radio->int_in_running = 0; usb_autopm_put_interface(radio->intf); + } } done: @@ -1197,16 +1194,21 @@ static int si470x_fops_release(struct file *file) mutex_lock(&radio->disconnect_lock); radio->users--; if (radio->users == 0) { + /* shutdown interrupt handler */ + if (radio->int_in_running) { + radio->int_in_running = 0; + if (radio->int_in_urb) + usb_kill_urb(radio->int_in_urb); + } + if (radio->disconnected) { video_unregister_device(radio->videodev); + kfree(radio->int_in_buffer); kfree(radio->buffer); kfree(radio); goto done; } - /* stop rds reception */ - cancel_delayed_work_sync(&radio->work); - /* cancel read processes */ wake_up_interruptible(&radio->read_queue); @@ -1241,31 +1243,6 @@ static const struct v4l2_file_operations si470x_fops = { **************************************************************************/ /* - * si470x_v4l2_queryctrl - query control - */ -static struct v4l2_queryctrl si470x_v4l2_queryctrl[] = { - { - .id = V4L2_CID_AUDIO_VOLUME, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Volume", - .minimum = 0, - .maximum = 15, - .step = 1, - .default_value = 15, - }, - { - .id = V4L2_CID_AUDIO_MUTE, - .type = V4L2_CTRL_TYPE_BOOLEAN, - .name = "Mute", - .minimum = 0, - .maximum = 1, - .step = 1, - .default_value = 1, - }, -}; - - -/* * si470x_vidioc_querycap - query device capabilities */ static int si470x_vidioc_querycap(struct file *file, void *priv, @@ -1290,7 +1267,6 @@ static int si470x_vidioc_querycap(struct file *file, void *priv, static int si470x_vidioc_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *qc) { - unsigned char i = 0; int retval = -EINVAL; /* abort if qc->id is below V4L2_CID_BASE */ @@ -1298,12 +1274,11 @@ static int si470x_vidioc_queryctrl(struct file *file, void *priv, goto done; /* search video control */ - for (i = 0; i < ARRAY_SIZE(si470x_v4l2_queryctrl); i++) { - if (qc->id == si470x_v4l2_queryctrl[i].id) { - memcpy(qc, &(si470x_v4l2_queryctrl[i]), sizeof(*qc)); - retval = 0; /* found */ - break; - } + switch (qc->id) { + case V4L2_CID_AUDIO_VOLUME: + return v4l2_ctrl_query_fill(qc, 0, 15, 1, 15); + case V4L2_CID_AUDIO_MUTE: + return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); } /* disable unsupported base controls */ @@ -1658,7 +1633,9 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct si470x_device *radio; - int retval = 0; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + int i, int_end_size, retval = 0; /* private data allocation and initialization */ radio = kzalloc(sizeof(struct si470x_device), GFP_KERNEL); @@ -1673,11 +1650,45 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, mutex_init(&radio->disconnect_lock); mutex_init(&radio->lock); + iface_desc = intf->cur_altsetting; + + /* Set up interrupt endpoint information. */ + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == + USB_DIR_IN) && ((endpoint->bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) + radio->int_in_endpoint = endpoint; + } + if (!radio->int_in_endpoint) { + printk(KERN_INFO DRIVER_NAME + ": could not find interrupt in endpoint\n"); + retval = -EIO; + goto err_radio; + } + + int_end_size = le16_to_cpu(radio->int_in_endpoint->wMaxPacketSize); + + radio->int_in_buffer = kmalloc(int_end_size, GFP_KERNEL); + if (!radio->int_in_buffer) { + printk(KERN_INFO DRIVER_NAME + "could not allocate int_in_buffer"); + retval = -ENOMEM; + goto err_radio; + } + + radio->int_in_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!radio->int_in_urb) { + printk(KERN_INFO DRIVER_NAME "could not allocate int_in_urb"); + retval = -ENOMEM; + goto err_intbuffer; + } + /* video device allocation and initialization */ radio->videodev = video_device_alloc(); if (!radio->videodev) { retval = -ENOMEM; - goto err_radio; + goto err_intbuffer; } memcpy(radio->videodev, &si470x_viddev_template, sizeof(si470x_viddev_template)); @@ -1735,9 +1746,6 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, radio->rd_index = 0; init_waitqueue_head(&radio->read_queue); - /* prepare rds work function */ - INIT_DELAYED_WORK(&radio->work, si470x_work); - /* register video device */ retval = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr); if (retval) { @@ -1752,6 +1760,8 @@ err_all: kfree(radio->buffer); err_video: video_device_release(radio->videodev); +err_intbuffer: + kfree(radio->int_in_buffer); err_radio: kfree(radio); err_initial: @@ -1765,12 +1775,8 @@ err_initial: static int si470x_usb_driver_suspend(struct usb_interface *intf, pm_message_t message) { - struct si470x_device *radio = usb_get_intfdata(intf); - printk(KERN_INFO DRIVER_NAME ": suspending now...\n"); - cancel_delayed_work_sync(&radio->work); - return 0; } @@ -1780,16 +1786,8 @@ static int si470x_usb_driver_suspend(struct usb_interface *intf, */ static int si470x_usb_driver_resume(struct usb_interface *intf) { - struct si470x_device *radio = usb_get_intfdata(intf); - printk(KERN_INFO DRIVER_NAME ": resuming now...\n"); - mutex_lock(&radio->lock); - if (radio->users && radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) - schedule_delayed_work(&radio->work, - msecs_to_jiffies(rds_poll_time)); - mutex_unlock(&radio->lock); - return 0; } @@ -1803,12 +1801,15 @@ static void si470x_usb_driver_disconnect(struct usb_interface *intf) mutex_lock(&radio->disconnect_lock); radio->disconnected = 1; - cancel_delayed_work_sync(&radio->work); usb_set_intfdata(intf, NULL); if (radio->users == 0) { /* set led to disconnect state */ si470x_set_led_state(radio, BLINK_ORANGE_LED); + /* Free data structures. */ + usb_free_urb(radio->int_in_urb); + + kfree(radio->int_in_buffer); video_unregister_device(radio->videodev); kfree(radio->buffer); kfree(radio); diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index 15b4d3ad4..e54bf1e70 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -312,6 +312,14 @@ config VIDEO_OV7670 OV7670 VGA camera. It currently only works with the M88ALP01 controller. +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + config VIDEO_TCM825X tristate "TCM825x camera sensor support" depends on I2C && VIDEO_V4L2 diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile index 327138f26..d3ec3a2fd 100644 --- a/linux/drivers/media/video/Makefile +++ b/linux/drivers/media/video/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_OV7670) += ov7670.o obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o +obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o diff --git a/linux/drivers/media/video/au0828/au0828-i2c.c b/linux/drivers/media/video/au0828/au0828-i2c.c index a589d2ccb..bbe38a7a2 100644 --- a/linux/drivers/media/video/au0828/au0828-i2c.c +++ b/linux/drivers/media/video/au0828/au0828-i2c.c @@ -326,6 +326,9 @@ static struct i2c_adapter au0828_i2c_adap_template = { .owner = THIS_MODULE, .id = I2C_HW_B_AU0828, .algo = &au0828_i2c_algo_template, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26) + .class = I2C_CLASS_TV_ANALOG, +#endif }; static struct i2c_client au0828_i2c_client_template = { diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c index 71f196ec5..4bab7c814 100644 --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c @@ -464,6 +464,30 @@ static struct xc5000_config mygica_x8506_xc5000_config = { .if_khz = 5380, }; +static int cx23885_dvb_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *param) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1275: + switch (param->u.vsb.modulation) { + case VSB_8: + cx23885_gpio_clear(dev, GPIO_5); + break; + case QAM_64: + case QAM_256: + default: + cx23885_gpio_set(dev, GPIO_5); + break; + } + break; + } + return (port->set_frontend_save) ? + port->set_frontend_save(fe, param) : -ENODEV; +} + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; @@ -503,6 +527,12 @@ static int dvb_register(struct cx23885_tsport *port) 0x60, &dev->i2c_bus[1].i2c_adap, &hauppauge_hvr127x_config); } + + /* FIXME: temporary hack */ + /* define bridge override to set_frontend */ + port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend; + fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend; + break; case CX23885_BOARD_HAUPPAUGE_HVR1255: i2c_bus = &dev->i2c_bus[0]; diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h index 2022ed7de..aecaca4b4 100644 --- a/linux/drivers/media/video/cx23885/cx23885.h +++ b/linux/drivers/media/video/cx23885/cx23885.h @@ -289,6 +289,10 @@ struct cx23885_tsport { /* Allow a single tsport to have multiple frontends */ u32 num_frontends; void *port_priv; + + /* FIXME: temporary hack */ + int (*set_frontend_save) (struct dvb_frontend *, + struct dvb_frontend_parameters *); }; struct cx23885_dev { diff --git a/linux/drivers/media/video/em28xx/Kconfig b/linux/drivers/media/video/em28xx/Kconfig index 16a5af30e..6524b493e 100644 --- a/linux/drivers/media/video/em28xx/Kconfig +++ b/linux/drivers/media/video/em28xx/Kconfig @@ -8,6 +8,8 @@ config VIDEO_EM28XX select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO + ---help--- This is a video4linux driver for Empia 28xx based TV cards. diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index b824eed46..928384e65 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -59,6 +59,8 @@ static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(card, "card type"); +#define MT9V011_VERSION 0x8243 + /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */ static unsigned long em28xx_devused; @@ -204,6 +206,13 @@ static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { {EM28XX_R08_GPIO, 0xff, 0xff, 10}, { -1, -1, -1, -1}, }; + +static struct em28xx_reg_seq silvercrest_reg_seq[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM28XX_R08_GPIO, 0x01, 0xf7, 10}, + { -1, -1, -1, -1}, +}; + /* * Board definitions */ @@ -451,6 +460,18 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_VIDEO, } }, }, + [EM2820_BOARD_SILVERCREST_WEBCAM] = { + .name = "Silvercrest Webcam 1.3mpix", + .tuner_type = TUNER_ABSENT, + .is_27xx = 1, + .decoder = EM28XX_MT9V011, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, + } }, + }, [EM2821_BOARD_SUPERCOMP_USB_2] = { .name = "Supercomp USB 2.0 TV", .valid = EM28XX_BOARD_NOT_VALIDATED, @@ -863,7 +884,7 @@ struct em28xx_board em28xx_boards[] = { .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .has_dvb = 1, - .dvb_gpio = default_analog, + .dvb_gpio = default_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, @@ -1708,6 +1729,11 @@ static unsigned short tvp5150_addrs[] = { I2C_CLIENT_END }; +static unsigned short mt9v011_addrs[] = { + 0xba >> 1, + I2C_CLIENT_END +}; + static unsigned short msp3400_addrs[] = { 0x80 >> 1, 0x88 >> 1, @@ -1747,6 +1773,46 @@ static inline void em28xx_set_model(struct em28xx *dev) EM28XX_I2C_FREQ_100_KHZ; } +/* HINT method: webcam I2C chips + * + * This method work for webcams with Micron sensors + */ +static int em28xx_hint_sensor(struct em28xx *dev) +{ + int rc; + char *sensor_name; + unsigned char cmd; + __be16 version_be; + u16 version; + + if (dev->model != EM2820_BOARD_UNKNOWN) + return 0; + + dev->i2c_client.addr = 0xba >> 1; + cmd = 0; + i2c_master_send(&dev->i2c_client, &cmd, 1); + rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2); + if (rc != 2) + return -EINVAL; + + version = be16_to_cpu(version_be); + + switch (version) { + case MT9V011_VERSION: + dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; + sensor_name = "mt9v011"; + break; + default: + printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version)); + return -EINVAL; + } + + em28xx_errdev("Sensor is %s, assuming that webcam is %s\n", + sensor_name, em28xx_boards[dev->model].name); + + return 0; +} + /* Since em28xx_pre_card_setup() requires a proper dev->model, * this won't work for boards with generic PCI IDs */ @@ -1775,7 +1841,10 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_info("chip ID is em2750\n"); break; case CHIP_ID_EM2820: - em28xx_info("chip ID is em2820\n"); + if (dev->board.is_27xx) + em28xx_info("chip is em2710\n"); + else + em28xx_info("chip ID is em2820\n"); break; case CHIP_ID_EM2840: em28xx_info("chip ID is em2840\n"); @@ -2261,6 +2330,10 @@ void em28xx_card_setup(struct em28xx *dev) before probing the i2c bus. */ em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; + case EM2820_BOARD_SILVERCREST_WEBCAM: + /* FIXME: need to document the registers bellow */ + em28xx_write_reg(dev, 0x0d, 0x42); + em28xx_write_reg(dev, 0x13, 0x08); } if (dev->board.has_snapshot_button) @@ -2292,6 +2365,10 @@ void em28xx_card_setup(struct em28xx *dev) v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvp5150", "tvp5150", tvp5150_addrs); + if (dev->board.decoder == EM28XX_MT9V011) + v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "mt9v011", "mt9v011", mt9v011_addrs); + if (dev->board.adecoder == EM28XX_TVAUDIO) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvaudio", "tvaudio", dev->board.tvaudio_addr); @@ -2447,6 +2524,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return errCode; } + em28xx_hint_sensor(dev); + /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); diff --git a/linux/drivers/media/video/em28xx/em28xx-core.c b/linux/drivers/media/video/em28xx/em28xx-core.c index 2bce72e4f..1033824bd 100644 --- a/linux/drivers/media/video/em28xx/em28xx-core.c +++ b/linux/drivers/media/video/em28xx/em28xx-core.c @@ -648,17 +648,28 @@ int em28xx_capture_start(struct em28xx *dev, int start) int em28xx_set_outfmt(struct em28xx *dev) { int ret; + int vinmode, vinctl, outfmt; + + outfmt = dev->format->reg; + + if (dev->board.is_27xx) { + vinmode = 0x0d; + vinctl = 0x00; + } else { + vinmode = 0x10; + vinctl = 0x11; + } ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT, - dev->format->reg | 0x20, 0x3f); + outfmt | 0x20, 0xff); if (ret < 0) - return ret; + return ret; - ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10); + ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode); if (ret < 0) return ret; - return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11); + return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl); } static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax, @@ -695,13 +706,19 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v) { u8 mode; /* the em2800 scaler only supports scaling down to 50% */ - if (dev->board.is_em2800) + + if (dev->board.is_27xx) { + /* FIXME: Don't use the scaler yet */ + mode = 0; + } else if (dev->board.is_em2800) { mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00); - else { + } else { u8 buf[2]; + buf[0] = h; buf[1] = h >> 8; em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2); + buf[0] = v; buf[1] = v >> 8; em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2); @@ -720,8 +737,11 @@ int em28xx_resolution_set(struct em28xx *dev) height = norm_maxh(dev) >> 1; em28xx_set_outfmt(dev); + + em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2); em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2); + return em28xx_scaler_set(dev, dev->hscale, dev->vscale); } diff --git a/linux/drivers/media/video/em28xx/em28xx-dvb.c b/linux/drivers/media/video/em28xx/em28xx-dvb.c index 85afa0be0..86be58641 100644 --- a/linux/drivers/media/video/em28xx/em28xx-dvb.c +++ b/linux/drivers/media/video/em28xx/em28xx-dvb.c @@ -244,6 +244,14 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK }; +static struct zl10353_config em28xx_terratec_xs_zl10353_xc3028 = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .disable_i2c_gate_ctrl = 1, + .parallel_ts = 1, + .if2 = 45600, +}; + #ifdef EM28XX_DRX397XD_SUPPORT /* [TODO] djh - not sure yet what the device config needs to contain */ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { @@ -434,7 +442,6 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: - case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_KWORLD_DVB_310U: case EM2880_BOARD_EMPIRE_DUAL_TV: dvb->frontend = dvb_attach(zl10353_attach, @@ -445,6 +452,25 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2880_BOARD_TERRATEC_HYBRID_XS: + dvb->frontend = dvb_attach(zl10353_attach, + &em28xx_terratec_xs_zl10353_xc3028, + &dev->i2c_adap); + if (dvb->frontend == NULL) { + /* This board could have either a zl10353 or a mt352. + If the chip id isn't for zl10353, try mt352 */ + + /* FIXME: make support for mt352 work */ + printk(KERN_ERR "version of this board with mt352 not " + "currently supported\n"); + result = -EINVAL; + goto out_free; + } + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; case EM2883_BOARD_KWORLD_HYBRID_330U: case EM2882_BOARD_EVGA_INDTUBE: dvb->frontend = dvb_attach(s5h1409_attach, diff --git a/linux/drivers/media/video/em28xx/em28xx-i2c.c b/linux/drivers/media/video/em28xx/em28xx-i2c.c index 1cdd88361..91cff2af3 100644 --- a/linux/drivers/media/video/em28xx/em28xx-i2c.c +++ b/linux/drivers/media/video/em28xx/em28xx-i2c.c @@ -461,7 +461,7 @@ static struct i2c_algorithm em28xx_algo = { static struct i2c_adapter em28xx_adap_template = { .owner = THIS_MODULE, -#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 22) +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26) .class = I2C_CLASS_TV_ANALOG, #endif .name = "em28xx", @@ -489,7 +489,7 @@ static char *i2c_devs[128] = { [0xa0 >> 1] = "eeprom", [0xb0 >> 1] = "tda9874", [0xb8 >> 1] = "tvp5150a", - [0xba >> 1] = "tvp5150a", + [0xba >> 1] = "webcam sensor or tvp5150a", [0xc0 >> 1] = "tuner (analog)", [0xc2 >> 1] = "tuner (analog)", [0xc4 >> 1] = "tuner (analog)", diff --git a/linux/drivers/media/video/em28xx/em28xx-video.c b/linux/drivers/media/video/em28xx/em28xx-video.c index 63d21698c..fff90faca 100644 --- a/linux/drivers/media/video/em28xx/em28xx-video.c +++ b/linux/drivers/media/video/em28xx/em28xx-video.c @@ -90,10 +90,53 @@ MODULE_PARM_DESC(video_debug, "enable debug messages [video]"); /* supported video standards */ static struct em28xx_fmt format[] = { { - .name = "16bpp YUY2, 4:2:2, packed", + .name = "16 bpp YUY2, 4:2:2, packed", .fourcc = V4L2_PIX_FMT_YUYV, .depth = 16, .reg = EM28XX_OUTFMT_YUV422_Y0UY1V, + }, { + .name = "16 bpp RGB 565, LE", + .fourcc = V4L2_PIX_FMT_RGB565, + .depth = 16, + .reg = EM28XX_OUTFMT_RGB_16_656, + }, { + .name = "8 bpp Bayer BGBG..GRGR", + .fourcc = V4L2_PIX_FMT_SBGGR8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_BGBG, + }, { + .name = "8 bpp Bayer GRGR..BGBG", + .fourcc = V4L2_PIX_FMT_SGRBG8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GRGR, + }, { + .name = "8 bpp Bayer GBGB..RGRG", + .fourcc = V4L2_PIX_FMT_SGBRG8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GBGB, + }, { + .name = "12 bpp YUV411", + .fourcc = V4L2_PIX_FMT_YUV411P, + .depth = 12, + .reg = EM28XX_OUTFMT_YUV411, +#if 0 + /* TODO: Those formats need test and fourcc entries */ + }, { + .name = "Bayer, 8bit RGRG..GBGB", + .fourcc = 0, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GBGB, + }, { + .name = "Y1-U-Y0-V, 16 bpp", + .fourcc = 0, + .depth = 16, + .reg = EM28XX_OUTFMT_YUV422_Y1UY0V + }, { + .name = "YUV211, 8 bpp", + .fourcc = 0, + .depth = 8, + .reg = EM28XX_OUTFMT_YUV211, +#endif }, }; @@ -705,7 +748,11 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return -EINVAL; } - if (dev->board.is_em2800) { + if (dev->board.is_27xx) { + /* FIXME: This is the only supported fmt */ + width = 640; + height = 480; + } else if (dev->board.is_em2800) { /* the em2800 can only scale down to 50% */ height = height > (3 * maxh / 4) ? maxh : maxh / 2; width = width > (3 * maxw / 4) ? maxw : maxw / 2; @@ -737,13 +784,40 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return 0; } +static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc, + unsigned width, unsigned height) +{ + struct em28xx_fmt *fmt; + + /* FIXME: This is the only supported fmt */ + if (dev->board.is_27xx) { + width = 640; + height = 480; + } + + fmt = format_by_fourcc(fourcc); + if (!fmt) + return -EINVAL; + + dev->format = fmt; + dev->width = width; + dev->height = height; + + /* set new image size */ + get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); + + em28xx_set_alternate(dev); + em28xx_resolution_set(dev); + + return 0; +} + static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; int rc; - struct em28xx_fmt *fmt; rc = check_dev(dev); if (rc < 0) @@ -753,12 +827,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, vidioc_try_fmt_vid_cap(file, priv, f); - fmt = format_by_fourcc(f->fmt.pix.pixelformat); - if (!fmt) { - rc = -EINVAL; - goto out; - } - if (videobuf_queue_is_busy(&fh->vb_vidq)) { em28xx_errdev("%s queue busy\n", __func__); rc = -EBUSY; @@ -771,16 +839,8 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, goto out; } - /* set new image size */ - dev->width = f->fmt.pix.width; - dev->height = f->fmt.pix.height; - dev->format = fmt; - get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); - - em28xx_set_alternate(dev); - em28xx_resolution_set(dev); - - rc = 0; + rc = em28xx_set_video_format(dev, f->fmt.pix.pixelformat, + f->fmt.pix.width, f->fmt.pix.height); out: mutex_unlock(&dev->lock); @@ -1373,6 +1433,9 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { + struct em28xx_fh *fh = priv; + struct em28xx *dev = fh->dev; + if (unlikely(f->index >= ARRAY_SIZE(format))) return -EINVAL; @@ -1671,11 +1734,6 @@ static int em28xx_v4l2_open(struct file *filp) filp->private_data = fh; if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) { - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); - dev->hscale = 0; - dev->vscale = 0; - em28xx_set_mode(dev, EM28XX_ANALOG_MODE); em28xx_set_alternate(dev); em28xx_resolution_set(dev); @@ -2029,15 +2087,14 @@ int em28xx_register_analog_devices(struct em28xx *dev) /* set default norm */ dev->norm = em28xx_video_template.current_norm; - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); dev->interlaced = EM28XX_INTERLACED_DEFAULT; - dev->hscale = 0; - dev->vscale = 0; dev->ctl_input = 0; /* Analog specific initialization */ dev->format = &format[0]; + em28xx_set_video_format(dev, format[0].fourcc, + norm_maxw(dev), norm_maxh(dev)); + video_mux(dev, dev->ctl_input); /* Audio defaults */ diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h index 6fb890efa..2eedfef53 100644 --- a/linux/drivers/media/video/em28xx/em28xx.h +++ b/linux/drivers/media/video/em28xx/em28xx.h @@ -108,6 +108,7 @@ #define EM2860_BOARD_TERRATEC_AV350 68 #define EM2882_BOARD_KWORLD_ATSC_315U 69 #define EM2882_BOARD_EVGA_INDTUBE 70 +#define EM2820_BOARD_SILVERCREST_WEBCAM 71 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 @@ -361,6 +362,7 @@ enum em28xx_decoder { EM28XX_NODECODER, EM28XX_TVP5150, EM28XX_SAA711X, + EM28XX_MT9V011, }; enum em28xx_adecoder { @@ -389,6 +391,7 @@ struct em28xx_board { unsigned int max_range_640_480:1; unsigned int has_dvb:1; unsigned int has_snapshot_button:1; + unsigned int is_27xx:1; unsigned int valid:1; unsigned char xclk, i2c_speed; diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx.h b/linux/drivers/media/video/gspca/stv06xx/stv06xx.h index bb73c3288..bdea4dae2 100644 --- a/linux/drivers/media/video/gspca/stv06xx/stv06xx.h +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx.h @@ -37,10 +37,6 @@ #define STV_ISOC_ENDPOINT_ADDR 0x81 -#ifndef V4L2_PIX_FMT_SGRBG8 -#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') -#endif - #define STV_REG23 0x0423 /* Control registers of the STV0600 ASIC */ diff --git a/linux/drivers/media/video/mt9v011.c b/linux/drivers/media/video/mt9v011.c new file mode 100644 index 000000000..505529e3e --- /dev/null +++ b/linux/drivers/media/video/mt9v011.c @@ -0,0 +1,447 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#include <linux/i2c.h> +#include "compat.h" +#include <linux/videodev2.h> +#include <linux/delay.h> +#include <media/v4l2-device.h> +#include "mt9v011.h" +#include <media/v4l2-i2c-drv.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("Micron mt9v011 sensor driver"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_LICENSE("GPL"); + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26) +/* standard i2c insmod options */ +static unsigned short normal_i2c[] = { + 0xba >> 1, + I2C_CLIENT_END +}; + +I2C_CLIENT_INSMOD; +#endif + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +/* supported controls */ +static struct v4l2_queryctrl mt9v011_qctrl[] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = (1 << 10) - 1, + .step = 1, + .default_value = 0x0020, + .flags = 0, + }, { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, +}; + +struct mt9v011 { + struct v4l2_subdev sd; + unsigned width, height; + + u16 global_gain, red_bal, blue_bal; +}; + +static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9v011, sd); +} + +static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + __be16 buffer; + int rc, val; + + rc = i2c_master_send(c, &addr, 1); + if (rc != 1) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 1)\n", rc); + + msleep(10); + + rc = i2c_master_recv(c, (char *)&buffer, 2); + if (rc != 2) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 2)\n", rc); + + val = be16_to_cpu(buffer); + + v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val); + + return val; +} + +static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr, + u16 value) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[3]; + int rc; + + buffer[0] = addr; + buffer[1] = value >> 8; + buffer[2] = value & 0xff; + + v4l2_dbg(2, debug, sd, + "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value); + rc = i2c_master_send(c, buffer, 3); + if (rc != 3) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 3)\n", rc); +} + + +struct i2c_reg_value { + unsigned char reg; + u16 value; +}; + +/* + * Values used at the original driver + * Some values are marked as Reserved at the datasheet + */ +static const struct i2c_reg_value mt9v011_init_default[] = { + { R0D_MT9V011_RESET, 0x0001 }, + { R0D_MT9V011_RESET, 0x0000 }, + + { R0C_MT9V011_SHUTTER_DELAY, 0x0000 }, + { R09_MT9V011_SHUTTER_WIDTH, 0x1fc }, + + { R0A_MT9V011_CLK_SPEED, 0x0000 }, + { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 }, + { R20_MT9V011_READ_MODE, 0x1000 }, + + { R07_MT9V011_OUT_CTRL, 0x000a }, /* chip enable */ +}; + +static void set_balance(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + u16 green1_gain, green2_gain, blue_gain, red_gain; + + green1_gain = core->global_gain; + green2_gain = core->global_gain; + + blue_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + red_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain); + mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green1_gain); + mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain); + mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); +} + +static void set_res(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned vstart, hstart; + + /* + * The mt9v011 doesn't have scaling. So, in order to select the desired + * resolution, we're cropping at the middle of the sensor. + * hblank and vblank should be adjusted, in order to warrant that + * we'll preserve the line timings for 30 fps, no matter what resolution + * is selected. + * NOTE: datasheet says that width (and height) should be filled with + * width-1. However, this doesn't work, since one pixel per line will + * be missing. + */ + + hstart = 14 + (640 - core->width) / 2; + mt9v011_write(sd, R02_MT9V011_COLSTART, hstart); + mt9v011_write(sd, R04_MT9V011_WIDTH, core->width); + mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width); + + vstart = 8 + (640 - core->height) / 2; + mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart); + mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height); + mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height); +}; + +static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++) + mt9v011_write(sd, mt9v011_init_default[i].reg, + mt9v011_init_default[i].value); + + set_balance(sd); + set_res(sd); + + return 0; +}; + +static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + + v4l2_dbg(1, debug, sd, "g_ctrl called\n"); + + switch (ctrl->id) { + case V4L2_CID_GAIN: + ctrl->value = core->global_gain; + return 0; + case V4L2_CID_RED_BALANCE: + ctrl->value = core->red_bal; + return 0; + case V4L2_CID_BLUE_BALANCE: + ctrl->value = core->blue_bal; + return 0; + } + return -EINVAL; +} + +static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + u8 i, n; + n = ARRAY_SIZE(mt9v011_qctrl); + + for (i = 0; i < n; i++) { + if (ctrl->id != mt9v011_qctrl[i].id) + continue; + if (ctrl->value < mt9v011_qctrl[i].minimum || + ctrl->value > mt9v011_qctrl[i].maximum) + return -ERANGE; + v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n", + ctrl->id, ctrl->value); + break; + } + + switch (ctrl->id) { + case V4L2_CID_GAIN: + core->global_gain = ctrl->value; + break; + case V4L2_CID_RED_BALANCE: + core->red_bal = ctrl->value; + break; + case V4L2_CID_BLUE_BALANCE: + core->blue_bal = ctrl->value; + break; + default: + return -EINVAL; + } + + set_balance(sd); + + return 0; +} + +static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt) +{ + if (fmt->index > 0) + return -EINVAL; + + fmt->flags = 0; + strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG"); + fmt->pixelformat = V4L2_PIX_FMT_SGRBG8; + + return 0; +} + +static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8) + return -EINVAL; + + v4l_bound_align_image(&pix->width, 48, 639, 1, + &pix->height, 32, 480, 1, 0); + + return 0; +} + +static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + struct mt9v011 *core = to_mt9v011(sd); + int rc; + + rc = mt9v011_try_fmt(sd, fmt); + if (rc < 0) + return -EINVAL; + + core->width = pix->width; + core->height = pix->height; + + set_res(sd); + + return 0; +} + + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9v011_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + reg->val = mt9v011_read(sd, reg->reg & 0xff); + reg->size = 2; + + return 0; +} + +static int mt9v011_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff); + + return 0; +} +#endif + +static int mt9v011_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011, + MT9V011_VERSION); +} + +static const struct v4l2_subdev_core_ops mt9v011_core_ops = { + .g_ctrl = mt9v011_g_ctrl, + .s_ctrl = mt9v011_s_ctrl, + .reset = mt9v011_reset, + .g_chip_ident = mt9v011_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9v011_g_register, + .s_register = mt9v011_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops mt9v011_video_ops = { + .enum_fmt = mt9v011_enum_fmt, + .try_fmt = mt9v011_try_fmt, + .s_fmt = mt9v011_s_fmt, +}; + +static const struct v4l2_subdev_ops mt9v011_ops = { + .core = &mt9v011_core_ops, + .video = &mt9v011_video_ops, +}; + + +/**************************************************************************** + I2C Client & Driver + ****************************************************************************/ + +static int mt9v011_probe(struct i2c_client *c, + const struct i2c_device_id *id) +{ + u16 version; + struct mt9v011 *core; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(c->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL); + if (!core) + return -ENOMEM; + + sd = &core->sd; + v4l2_i2c_subdev_init(sd, c, &mt9v011_ops); + + /* Check if the sensor is really a MT9V011 */ + version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); + if (version != MT9V011_VERSION) { + v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n", + version); + kfree(core); + return -EINVAL; + } + + core->global_gain = 0x0024; + core->width = 640; + core->height = 480; + + v4l_info(c, "chip found @ 0x%02x (%s)\n", + c->addr << 1, c->adapter->name); + + return 0; +} + +static int mt9v011_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + + v4l2_dbg(1, debug, sd, + "mt9v011.c: removing mt9v011 adapter on address 0x%x\n", + c->addr << 1); + + v4l2_device_unregister_subdev(sd); + kfree(to_mt9v011(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) +static const struct i2c_device_id mt9v011_id[] = { + { "mt9v011", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9v011_id); + +#endif +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "mt9v011", + .probe = mt9v011_probe, + .remove = mt9v011_remove, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26) + .legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL, +#else + .id_table = mt9v011_id, +#endif +}; diff --git a/linux/drivers/media/video/mt9v011.h b/linux/drivers/media/video/mt9v011.h new file mode 100644 index 000000000..9e443ee30 --- /dev/null +++ b/linux/drivers/media/video/mt9v011.h @@ -0,0 +1,35 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#ifndef MT9V011_H_ +#define MT9V011_H_ + +#define R00_MT9V011_CHIP_VERSION 0x00 +#define R01_MT9V011_ROWSTART 0x01 +#define R02_MT9V011_COLSTART 0x02 +#define R03_MT9V011_HEIGHT 0x03 +#define R04_MT9V011_WIDTH 0x04 +#define R05_MT9V011_HBLANK 0x05 +#define R06_MT9V011_VBLANK 0x06 +#define R07_MT9V011_OUT_CTRL 0x07 +#define R09_MT9V011_SHUTTER_WIDTH 0x09 +#define R0A_MT9V011_CLK_SPEED 0x0a +#define R0B_MT9V011_RESTART 0x0b +#define R0C_MT9V011_SHUTTER_DELAY 0x0c +#define R0D_MT9V011_RESET 0x0d +#define R1E_MT9V011_DIGITAL_ZOOM 0x1e +#define R20_MT9V011_READ_MODE 0x20 +#define R2B_MT9V011_GREEN_1_GAIN 0x2b +#define R2C_MT9V011_BLUE_GAIN 0x2c +#define R2D_MT9V011_RED_GAIN 0x2d +#define R2E_MT9V011_GREEN_2_GAIN 0x2e +#define R35_MT9V011_GLOBAL_GAIN 0x35 +#define RF1_MT9V011_CHIP_ENABLE 0xf1 + +#define MT9V011_VERSION 0x8243 + +#endif diff --git a/linux/drivers/media/video/pwc/pwc.h b/linux/drivers/media/video/pwc/pwc.h index 3a89dca13..7a766eb35 100644 --- a/linux/drivers/media/video/pwc/pwc.h +++ b/linux/drivers/media/video/pwc/pwc.h @@ -137,12 +137,6 @@ #define DEVICE_USE_CODEC3(x) ((x)>=700) #define DEVICE_USE_CODEC23(x) ((x)>=675) - -#ifndef V4L2_PIX_FMT_PWC1 -#define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P','W','C','1') -#define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P','W','C','2') -#endif - /* The following structures were based on cpia.h. Why reinvent the wheel? :-) */ struct pwc_iso_buf { diff --git a/linux/drivers/media/video/soc_camera.c b/linux/drivers/media/video/soc_camera.c index e4056a9c2..4f315c1b7 100644 --- a/linux/drivers/media/video/soc_camera.c +++ b/linux/drivers/media/video/soc_camera.c @@ -238,11 +238,11 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd) return -ENOMEM; icd->num_user_formats = fmts; - fmts = 0; dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts); /* Second pass - actually fill data formats */ + fmts = 0; for (i = 0; i < icd->num_formats; i++) if (!ici->ops->get_formats) { icd->user_formats[i].host_fmt = icd->formats + i; @@ -878,8 +878,11 @@ static int soc_camera_probe(struct device *dev) (unsigned short)~0; ret = soc_camera_init_user_formats(icd); - if (ret < 0) + if (ret < 0) { + if (icd->ops->remove) + icd->ops->remove(icd); goto eiufmt; + } icd->height = DEFAULT_HEIGHT; icd->width = DEFAULT_WIDTH; @@ -903,8 +906,10 @@ static int soc_camera_remove(struct device *dev) { struct soc_camera_device *icd = to_soc_camera_dev(dev); + mutex_lock(&icd->video_lock); if (icd->ops->remove) icd->ops->remove(icd); + mutex_unlock(&icd->video_lock); soc_camera_free_user_formats(icd); @@ -1146,6 +1151,7 @@ evidallocd: } EXPORT_SYMBOL(soc_camera_video_start); +/* Called from client .remove() methods with .video_lock held */ void soc_camera_video_stop(struct soc_camera_device *icd) { struct video_device *vdev = icd->vdev; @@ -1155,10 +1161,8 @@ void soc_camera_video_stop(struct soc_camera_device *icd) if (!icd->dev.parent || !vdev) return; - mutex_lock(&icd->video_lock); video_unregister_device(vdev); icd->vdev = NULL; - mutex_unlock(&icd->video_lock); } EXPORT_SYMBOL(soc_camera_video_stop); diff --git a/linux/drivers/media/video/v4l2-common.c b/linux/drivers/media/video/v4l2-common.c index ab91734b1..864ee0772 100644 --- a/linux/drivers/media/video/v4l2-common.c +++ b/linux/drivers/media/video/v4l2-common.c @@ -1066,7 +1066,7 @@ struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, u8 addr, const unsigned short *probe_addrs) { struct v4l2_subdev *sd = NULL; - struct i2c_client *client; + struct i2c_client *client = NULL; BUG_ON(!v4l2_dev); diff --git a/linux/drivers/media/video/v4l2-ioctl.c b/linux/drivers/media/video/v4l2-ioctl.c index 625fe7698..80c94dc5a 100644 --- a/linux/drivers/media/video/v4l2-ioctl.c +++ b/linux/drivers/media/video/v4l2-ioctl.c @@ -43,6 +43,12 @@ printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\ } while (0) +#define dbgarg3(fmt, arg...) \ + do { \ + if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) \ + printk(KERN_CONT "%s: " fmt, vfd->name, ## arg);\ + } while (0) + /* Zero out the end of the struct pointed to by p. Everthing after, but * not including, the specified field is cleared. */ #define CLEAR_AFTER_FIELD(p, field) \ @@ -1727,20 +1733,20 @@ static long __video_do_ioctl(struct file *file, p->type); switch (p->type) { case V4L2_FRMSIZE_TYPE_DISCRETE: - printk("width = %d, height=%d\n", + dbgarg3("width = %d, height=%d\n", p->discrete.width, p->discrete.height); break; case V4L2_FRMSIZE_TYPE_STEPWISE: - printk("min %dx%d, max %dx%d, step %dx%d\n", + dbgarg3("min %dx%d, max %dx%d, step %dx%d\n", p->stepwise.min_width, p->stepwise.min_height, p->stepwise.step_width, p->stepwise.step_height, p->stepwise.max_width, p->stepwise.max_height); break; case V4L2_FRMSIZE_TYPE_CONTINUOUS: - printk("continuous\n"); + dbgarg3("continuous\n"); break; default: - printk("- Unknown type!\n"); + dbgarg3("- Unknown type!\n"); } break; diff --git a/linux/drivers/media/video/vivi.c b/linux/drivers/media/video/vivi.c index fe39b7326..afd8e2a5a 100644 --- a/linux/drivers/media/video/vivi.c +++ b/linux/drivers/media/video/vivi.c @@ -346,6 +346,53 @@ static struct bar_std bars[] = { #define TO_U(r, g, b) \ (((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128) +/* precalculate color bar values to speed up rendering */ +static void precalculate_bars(struct vivi_fh *fh) +{ + struct vivi_dev *dev = fh->dev; + unsigned char r, g, b; + int k, is_yuv; + + fh->input = dev->input; + + for (k = 0; k < 8; k++) { + r = bars[fh->input].bar[k][0]; + g = bars[fh->input].bar[k][1]; + b = bars[fh->input].bar[k][2]; + is_yuv = 0; + + switch (fh->fmt->fourcc) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + is_yuv = 1; + break; + case V4L2_PIX_FMT_RGB565: + case V4L2_PIX_FMT_RGB565X: + r >>= 3; + g >>= 2; + b >>= 3; + break; + case V4L2_PIX_FMT_RGB555: + case V4L2_PIX_FMT_RGB555X: + r >>= 3; + g >>= 3; + b >>= 3; + break; + } + + if (is_yuv) { + fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ + fh->bars[k][1] = TO_U(r, g, b); /* Cb */ + fh->bars[k][2] = TO_V(r, g, b); /* Cr */ + } else { + fh->bars[k][0] = r; + fh->bars[k][1] = g; + fh->bars[k][2] = b; + } + } + +} + #define TSTAMP_MIN_Y 24 #define TSTAMP_MAX_Y (TSTAMP_MIN_Y + 15) #define TSTAMP_INPUT_X 10 @@ -758,6 +805,8 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, buf->vb.height = fh->height; buf->vb.field = field; + precalculate_bars(fh); + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { rc = videobuf_iolock(vq, &buf->vb, NULL); if (rc < 0) @@ -896,53 +945,6 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return 0; } -/* precalculate color bar values to speed up rendering */ -static void precalculate_bars(struct vivi_fh *fh) -{ - struct vivi_dev *dev = fh->dev; - unsigned char r, g, b; - int k, is_yuv; - - fh->input = dev->input; - - for (k = 0; k < 8; k++) { - r = bars[fh->input].bar[k][0]; - g = bars[fh->input].bar[k][1]; - b = bars[fh->input].bar[k][2]; - is_yuv = 0; - - switch (fh->fmt->fourcc) { - case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_UYVY: - is_yuv = 1; - break; - case V4L2_PIX_FMT_RGB565: - case V4L2_PIX_FMT_RGB565X: - r >>= 3; - g >>= 2; - b >>= 3; - break; - case V4L2_PIX_FMT_RGB555: - case V4L2_PIX_FMT_RGB555X: - r >>= 3; - g >>= 3; - b >>= 3; - break; - } - - if (is_yuv) { - fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ - fh->bars[k][1] = TO_U(r, g, b); /* Cb */ - fh->bars[k][2] = TO_V(r, g, b); /* Cr */ - } else { - fh->bars[k][0] = r; - fh->bars[k][1] = g; - fh->bars[k][2] = b; - } - } - -} - /*FIXME: This seems to be generic enough to be at videodev2 */ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) @@ -968,8 +970,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, fh->vb_vidq.field = f->fmt.pix.field; fh->type = f->type; - precalculate_bars(fh); - ret = 0; out: mutex_unlock(&q->vb_lock); @@ -1360,6 +1360,7 @@ static int __init vivi_create_instance(int inst) goto unreg_dev; *vfd = vivi_template; + vfd->debug = debug; ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); if (ret < 0) diff --git a/linux/include/linux/videodev2.h b/linux/include/linux/videodev2.h index 699ea62a7..ee6458f74 100644 --- a/linux/include/linux/videodev2.h +++ b/linux/include/linux/videodev2.h @@ -275,7 +275,9 @@ struct v4l2_pix_format { __u32 priv; /* private data, depends on pixelformat */ }; -/* Pixel format FOURCC depth Description */ +/* Pixel format FOURCC depth Description */ + +/* RGB formats */ #define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R', 'G', 'B', '1') /* 8 RGB-3-3-2 */ #define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R', '4', '4', '4') /* 16 xxxxrrrr ggggbbbb */ #define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R', 'G', 'B', 'O') /* 16 RGB-5-5-5 */ @@ -286,12 +288,20 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */ #define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */ #define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R', 'G', 'B', '4') /* 32 RGB-8-8-8-8 */ + +/* Grey formats */ #define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */ #define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ + +/* Palette formats */ #define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ + +/* Luminance+Chrominance formats */ #define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y', 'V', 'U', '9') /* 9 YVU 4:1:0 */ #define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */ #define V4L2_PIX_FMT_YUYV v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16 YUV 4:2:2 */ +#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16 YUV 4:2:2 */ +#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ #define V4L2_PIX_FMT_UYVY v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16 YUV 4:2:2 */ #define V4L2_PIX_FMT_VYUY v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16 YUV 4:2:2 */ #define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16 YVU422 planar */ @@ -301,6 +311,10 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */ #define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */ #define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */ +#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */ +#define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */ +#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */ +#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */ /* two planes -- one Y, one Cr + Cb interleaved */ #define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ @@ -308,23 +322,17 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */ #define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ -/* The following formats are not defined in the V4L2 specification */ -#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */ -#define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */ -#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16 YUV 4:2:2 */ -#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */ -#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */ - -/* see http://www.siliconimaging.com/RGB%20Bayer.htm */ +/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */ #define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */ #define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */ -/* - * 10bit raw bayer, expanded to 16 bits - * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb... - */ -#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') -/* 10bit raw bayer DPCM compressed to 8 bits */ +#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */ +#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10bit raw bayer */ + /* 10bit raw bayer DPCM compressed to 8 bits */ #define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0') + /* + * 10bit raw bayer, expanded to 16 bits + * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb... + */ #define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16 BGBG.. GRGR.. */ /* compressed formats */ @@ -347,7 +355,6 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */ #define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */ #define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ -#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ #define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */ #define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */ diff --git a/linux/include/media/v4l2-chip-ident.h b/linux/include/media/v4l2-chip-ident.h index 4d7e2272c..11a4a2d3e 100644 --- a/linux/include/media/v4l2-chip-ident.h +++ b/linux/include/media/v4l2-chip-ident.h @@ -155,6 +155,9 @@ enum { /* module cafe_ccic, just ident 8801 */ V4L2_IDENT_CAFE = 8801, + /* module mt9v011, just ident 8243 */ + V4L2_IDENT_MT9V011 = 8243, + /* module tw9910: just ident 9910 */ V4L2_IDENT_TW9910 = 9910, diff --git a/linux/include/media/v4l2-subdev.h b/linux/include/media/v4l2-subdev.h index 5dcb36785..89a39ce17 100644 --- a/linux/include/media/v4l2-subdev.h +++ b/linux/include/media/v4l2-subdev.h @@ -220,6 +220,9 @@ struct v4l2_subdev_video_ops { int (*g_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt); int (*try_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt); int (*s_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt); + int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc); + int (*g_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop); + int (*s_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop); int (*g_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param); int (*s_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param); int (*enum_framesizes)(struct v4l2_subdev *sd, struct v4l2_frmsizeenum *fsize); |