summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-03-30tuner-simple: fix broken build dependencyMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> tuner-simple is the only module that uses tuner-types - these will be merged to a single module in the future. For now, build both of them if TUNER_SIMPLE is selected. This fixes the following build warning, if tuner-simple is selected without tuner-types: WARNING: "tuner_count" [tuner-simple.ko] undefined! WARNING: "tuners" [tuner-simple.ko] undefined! Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-29New USB ID for Leadtek DVB-T USBPatrick Boettcher
From: Darryl Green <darryl.green@aanet.com.au> Detect Leadtek Winfast USB DTV Dongle with ID of 0x6f01 Signed-off-by: Darryl Green <darryl.green@aanet.com.au> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29Added support for Terratec Cinergy T USB XXSPatrick Boettcher
From: Alexander Simon <alexander.simon@informatik.tu-muenchen.de> Alexander Simon found out that the Terratec Cinergy T USB XXS is just a clone of another DiB7070P-based device. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29[PATCH] support key repeat with dib0700 ir receiverPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This patch enables support for repeating last event when a key is holded down with dib0700 devices. It works with rc5 and nec remotes. It also fixes an annoying bug that floods kernel log with "Unknown key" messages after each keypress. This happened because the driver was not resetting infrared register after each poll so it kept polling last key even if nothing was being pressed. Fixing this, (calling rc_setup after each poll), permits to implement key repeat. Signed-off-by: Filippo Argiolas <filippo.argiolas at gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29PATCH for various Dibcom based devicesPatrick Boettcher
From: Albert Comerma <albert.comerma@gmail.com> This patch introduces support for dvb-t for the following DiBcom based cards: - Terratec Cinergy HT USB XE (USB-ID: 0ccd:0058) - Terratec Cinergy HT Express (USB-ID: 0ccd:0060) - Pinnacle 320CX (USB-ID: 2304:022e) - Pinnacle PCTV72e (USB-ID: 2304:0236) - Pinnacle PCTV73e (USB-ID: 2304:0237) - Yuan EC372S (USB-ID: 1164:1edc) Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by: Felix Apitzsch <F.Apitzsch@soz.uni-frankfurt.de> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Albert Comerma <albert.comerma@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29[PATCH] reworked patch to support TT connect S-2400Patrick Boettcher
From: Andre Weidemann <Andre.Weidemann@web.de> Added support for Technotrend connect S-2400. Signed-off-by: Andre Weidemann <Andre.Weidemann@web.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29SkyStar2: preparing support for the rev2.8Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Support is prepared, but the CX24113-driver .c-file is missing. After sorting out the NDA problems, the file will be there immediatly. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29CX24123: preparing support for CX24113 tunerPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> To support a new device based on CX24123 (using the CX24113-tuner) the following was done: - added two parameters to de-select the internal PLL-driver (for CX24108) and a AGC-function callback. - added a virtual i2c-adapter which allow simple access behind the i2c-gate - cleanup up some code Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29Preparation for supporting new devices, cleanup and sanenessPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> To prepare the support for new device to the flexcop-family some preparation and cleanups was done + some saneness: - created an i2c-adapter for each i2c-port available. Easier usage for devices with several device on different i2c-busses - initialize i2c before doing the eeprom read - changed the way to attach the different frontends, easier to read now - enabled support for i2c-devices having no register address (1-byte access) Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29Remove obsolete STV0297 module for CableStar2Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> The support for the CableStar2 has been merge to the main stv0297-module - so this is obsolete. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-03-29Avoid minor model number warning when an OEM HVR1250 board is detected.Steven Toth
From: Steven Toth <stoth@hauppauge.com> Avoid minor model number warning when an OEM HVR1250 board is detected. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-03-29Fix eeprom parsing and errors on the HVR1800 products.Steven Toth
From: Steven Toth <stoth@hauppauge.com> On some models, the valid Hauppauge eeprom data begins at a different offset. This patch avoid unfriendly 'corrupt' eeprom errors during driver load. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-03-29Convert driver to use a single SRAM memory map.Steven Toth
From: Steven Toth <stoth@hauppauge.com> This reduces the memory footprint and removes the need to manually configure each map, which lead to a bug where the Fusion EXP 5 board broke for a while. This also fixes digital support again for the DViCO FusionHDTV5Express. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-03-28saa7134: Adds analog support for Avermedia A16DMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks to timf <timf@iinet.net.au>, "Richard (MQ)" <osl2008@googlemail.com> and gian luca rasponi <lucarasp@inwind.it> for their tests. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-28Avoid build warnings for distro-patched 2.6.24 kernelsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-28vivi: Add 32bit compatibility to the moduleMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks to Jiri Slaby <jirislaby@gmail.com> for pointing this issue. CC: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-28cx88_dvb: qam doesn't apply on Kword ATSC 120Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks to Michael Krufky for pointing this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-27merge: http://linuxtv.org/hg/~mkrufky/build-fixMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-26kconfig fixes for tuner-simpleMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Update Kconfig for the hybrid devices recently converted to use tuner-simple rather than dvb-pll. dvb-bt8xx no longer uses dvb-pll at all, so remove all references to dvb-pll within that driver. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-26dvb-bt8xx: fix build errorMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Fix the following build error: In file included from dvb-bt8xx.c:35: dvb-bt8xx.h:42:26: error: tuner-simple.h: No such file or directory dvb-bt8xx.c: In function 'frontend_init': dvb-bt8xx.c:612: error: 'simple_tuner_attach' undeclared (first use in this function) dvb-bt8xx.c:612: error: (Each undeclared identifier is reported only once dvb-bt8xx.c:612: error: for each function it appears in.) dvb-bt8xx.c:612: warning: type defaults to 'int' in declaration of '__a' dvb-bt8xx.c:612: warning: type defaults to 'int' in declaration of 'type name' dvb-bt8xx.c:612: warning: cast from pointer to integer of different size dvb-bt8xx.c:612: warning: type defaults to 'int' in declaration of 'type name' dvb-bt8xx.c:612: warning: cast from pointer to integer of different size dvb-bt8xx.c:612: error: called object '__a' is not a function dvb-bt8xx.c:696: warning: type defaults to 'int' in declaration of '__a' dvb-bt8xx.c:696: warning: type defaults to 'int' in declaration of 'type name' dvb-bt8xx.c:696: warning: cast from pointer to integer of different size dvb-bt8xx.c:696: warning: type defaults to 'int' in declaration of 'type name' dvb-bt8xx.c:696: warning: cast from pointer to integer of different size dvb-bt8xx.c:696: error: called object '__a' is not a function Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-26tuner-xc2028: Adds an option to allow forcing to load an specific firmware nameMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> There are a number of different firmware versions and variants, shipped together with boards. This patch adds an extra parameter to the tuner-xc2028 to allow specifying for an specific firmware name to be loaded. This helps to test for a firmware that better fits some board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-25merge: http://linuxtv.org/hg/~mkrufky/tda18271c2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-25merge: http://linuxtv.org/hg/~mkrufky/tunerMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-24dvb-pll: remove rf input module optionsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The ability to select RF input was a supported feature only available on Philips TUV1236d and Philips FCV1236d. This feature, along with support for the tuners that used it, was moved into the tuner-simple module. This can now be removed from dvb-pll. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-24 soc-camera: improve separation between soc_camera_ops and soc_camera_deviceMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> In case of muliple cameras, handled by the same driver, they can support different picture formats, therefore formats and num_formats cannot belong to soc_camera_ops, which is only one per driver, move them to soc_camera_device, which is one per device instance. OTOH, probe and remove methods are always the same, move them to soc_camera_ops. Thanks to Eric Miao for making me look at this code again:-) Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-24merge: http://linuxtv.org/hg/~dougsland/saa7134Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-24merge: http://linuxtv.org/hg/~dougsland/v4l-compat/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-23tda18271: increment module version minorMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-23 cx88: Enable color killer by defaultMauro Carvalho Chehab
From: Frej Drejhammar <frej.drejhammar@gmail.com> An enabled color killer will not degrade picture quality for color input signals, only suppress bogus color information on black-and-white input. Therefore enable it by default. Signed-off-by: Frej Drejhammar <frej.drejhammar@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01bttv: Fix some API non-compliances for some audio/input V4L2 callsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks to Cyrill Gorcunov <gorcunov@gmail.com> for pointing this CC: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01 bttv: fix missed index checkMauro Carvalho Chehab
From: Cyrill Gorcunov <gorcunov@gmail.com> We should check for proper index first Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01 bttv: Bt832 - fix possible NULL pointer derefMauro Carvalho Chehab
From: Cyrill Gorcunov <gorcunov@gmail.com> This patch does fix potential NULL pointer dereference Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-27 Test cmd, not definition in decoder_command(), ↵Mauro Carvalho Chehab
drivers/media/video/zoran_device.c From: Roel Kluin <12o3l@tiscali.nl> include/linux/video_decoder.h: 34:#define DECODER_SET_NORM _IOW('d', 3, int) 35:#define DECODER_SET_INPUT _IOW('d', 4, int) untested, please confirm it's right. Test cmd value, not definition of DECODER_SET_INPUT Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-23cx88: Add user control for color killerMauro Carvalho Chehab
From: Frej Drejhammar <frej.drejhammar@gmail.com> The cx2388x family has a color killer. This patch implements the V4L2_CID_COLOR_KILLER control for the cx2388x family. By default the color killer is disabled, as in previous versions of the driver. Signed-off-by: "Frej Drejhammar <frej.drejhammar@gmail.com>" Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-23v4l2-api: Define a standard control for color killer functionalityMauro Carvalho Chehab
From: Frej Drejhammar <frej.drejhammar@gmail.com> Define a pre-defined control ID for color killer functionality. Signed-off-by: "Frej Drejhammar <frej.drejhammar@gmail.com>" Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-23cx88: Enable chroma AGC by default for all non-SECAM modesMauro Carvalho Chehab
From: Frej Drejhammar <frej.drejhammar@gmail.com> An enabled chroma AGC will not degrade picture quality if enabled on a color PAL or NTSC signal with nominal signal levels. It will give a significant color reproduction improvement if the chroma signals diverge from nominal levels. Therefore enable chroma AGC by default for PAL and NTSC standards. Signed-off-by: "Frej Drejhammar <frej.drejhammar@gmail.com>" Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-23cx88: Add user control for chroma AGCMauro Carvalho Chehab
From: Frej Drejhammar <frej.drejhammar@gmail.com> The cx2388x family has support for chroma AGC. This patch implements a the V4L2_CID_CHROMA_AGC control for the cx2388x family. By default chroma AGC is disabled, as in previous versions of the driver. Signed-off-by: "Frej Drejhammar <frej.drejhammar@gmail.com>" Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-23v4l2-api: Define a standard control for chroma AGCMauro Carvalho Chehab
From: Frej Drejhammar <frej.drejhammar@gmail.com> Define a pre-defined control ID for chroma automatic gain control. Signed-off-by: "Frej Drejhammar <frej.drejhammar@gmail.com>" Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-26cx88: fix oops on module removal caused by IR workerMauro Carvalho Chehab
From: Marton Balint <cus@fazekas.hu> If the IR worker is not stopped before the removal of the cx88xx module, an OOPS may occur, because the worker function cx88_ir_work gets called. So stop the ir worker. Signed-off-by: Marton Balint <cus@fazekas.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-27Add support for Kworld ATSC 120Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This board has a s5h1409 demod, plus a xc30x8 tuner (probably, xc3018). This patch adds proper support for radio, video, s-video, composite and ATSC. However, support for radio and video depends on having s5h1409 i2c gate open, otherwise, xc30x8 chip won't be visible. For a better support, some rework is needed on cx88 driver, to allow adding xc30x8 to i2c bus without sending i2c 0 byte reading to 0xc2 address. Thanks to Vanessa Ezekowitz <vanessaezekowitz@gmail.com> for helping to figure out the proper parameters for s5h1409 and the GPIO pins used by each configuration. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-23saa7134.h: Remove unnecessary validationDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@gmail.com> Removed unnecessary VIDIOC_G_PRIORITY validation. Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
2008-03-23[PATCH] add macro validation for v4l_compat_ioctl32.Douglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@gmail.com> Added macro CONFIG_COMPAT for v4l_compat_ioctl32. Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
2008-03-23tda18271: add basic support for slave tuner configurationsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-23tda18271: add function tda18271_charge_pump_sourceMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Force the main pll charge pump or cal pll charge pump to source current to the main pll loop filter or cal pll loop filter, respectively. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-23 radio-si470x: unplugging fixedMauro Carvalho Chehab
From: Tobias Lorenz <tobias.lorenz@gmx.net> this patch fixes several kernel oops, when unplugging device while it is in use: Basically the patch delays freeing of the internal variables in si470x_usb_driver_disconnect, until the the last user closed the device in si470x_fops_release. This was implemented a while ago with the help of Oliver Neukum. I tested the patch five times (unplugging while in use) without oops coming from the radio-si470x driver anymore. A remaining oops was coming from the usbaudio driver, but this is someone else task. Hopefully this fixed all unplugging issues. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-22tda18271: set rfagc modes during channel configurationMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Set rfagc to high speed mode before setting the pll. Set rfagc to normal speed mode at the end of the function. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-22tda18271: fix comparison bug in tda18271_powerscanMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-23tda18271: allow device-specific configuration of rf agc topMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> allow device-specific configuration of rf agc rf top and if top Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-23tda18271: allow device-specific configuration of IF levelMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-22tda18271: fix typo in tda18271_calibrate_rfMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The internal calibration signal must be set on the cal pll. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 14:02:23 +0000