summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb
AgeCommit message (Collapse)Author
2007-02-17merge with main repositoryHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-02-14merge: http://linuxtv.org/hg/~mkrufky/qt1010Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-14merge: http://linuxtv.org/hg/~endriss/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-13qt1010: whitespace / 80 column cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-02-13stv0297: Enable BER/UNC countingOliver Endriss
From: Hartmut Birr <e9hack@googlemail.com> Enable BER/UNC counting for the stv0297 frontend. The idea for this patch comes from stv0297_cs.c. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-02-13qt1010: use ARRAY_SIZE macro when appropriateMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Use ARRAY_SIZE macro already defined in kernel.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-02-13qt1010: fix compiler warningMichael Krufky
From: Marco Schluessler <marco@lordzodiac.de> In function 'qt1010_init': warning: 'err' might be used uninitialized in this function Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-02-13dvbdev: fix illegal re-usage of fileoperations structMarcel Siegert
From: Marcel Siegert <mws@linuxtv.org> Arjan van de Ven <arjan@infradead.org> reported an illegal re-usage of the fileoperations struct if more than one dvb device(e.g. frontend) is present. this patch fixes this issue. it allocates a new fileoperations struct each time a device is registered and copies the default template fileops. Signed-off-by: Marcel Siegert <mws@linuxtv.org>
2007-02-13budget-ci: IR handling fixupsOliver Endriss
From: David Härdeman <david@hardeman.nu> Changeset 6562d27de0d7 by Oliver Endriss changed the budget-ci driver to use interrupt mode for i2c transfers. This also meant that a new bunch of IR bytes that were previously lost are now received, which allowed me to better understand how the MSP430 chip works. Unfortunately it also means that the current driver gets some assumptions wrong and might generate double keypresses for one IR command. The attached patch fixes this by throwing away the repeat bytes and by associating the correct command and device bytes. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-02-13dvb-ttpci: use i2c gate ctrl from stv0297 frontend driverOliver Endriss
From: Marco Schluessler <marco@lordzodiac.de> Use i2c gate ctrl from stv0297 frontend driver. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-02-11merge: http://linuxtv.org/hg/~mkrufky/megasky.devMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-10zl10353: register definitions updateChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Update the descriptions of "discovered" registers on the zl10353, using the equivalaent mt352 register names. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2007-02-10zl10353: Implement TRL nominal rate calculationChris Pascoe
From: Antti Palosaari <crope@iki.fi> Implement trl nominal rate calculation to Zarlink ZL10353 demod, based on calculation used in Zarlink MT352. This adds support for 6 and 8MHz bandwidth transponders. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2007-02-10zl10353: add i2c_gate_ctrl supportChris Pascoe
From: Antti Palosaari <crope@iki.fi> Implement I2C gate control for Megasky GL861 and SigmaTek AU6610 support. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Antti Palosaari <crope@iki.fi>
2007-02-10Experimental support for zl10353 signal strength/BER/uncorrectable countChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> After studying many hours worth of register dumps of MT352 and ZL10353 fed with identically damaged RF signals I have made an educated guess at which registers contain the AGC level, bit error rate and uncorrectable error count values. Implement the IOCTLs that return these values to userspace. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2007-02-08kthread api conversion for dvb_frontend and av7110 fixMauro Carvalho Chehab
From: akpm@linux-foundation.org <akpm@linux-foundation.org> avoid double-up(), pointed out by Oliver. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-08kthread API conversion for dvb_frontend and av7110Mauro Carvalho Chehab
From: Herbert Poetzl <herbert@13thfloor.at> dvb kernel_thread to kthread API port. It is running fine here, including module load/unload and software suspend (which doesn't work as expected with or without this patch :). I didn't convert the dvb_ca_en50221 as I do not have such an interface, but if the conversion process is fine with the v4l-dvb maintainers, it should not be a problem to send a patch for that too ... Signed-off-by: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-07CodingStyle cleanupsMauro Carvalho Chehab
From: Ahmed S. Darwish <darwish.07@gmail.com> After commited at the tree, Ahmed re-sent his patch with some codingstyle cleanups. This diff-patch will be folded with the first one at -git. Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06DVB: Use ARRAY_SIZE macro when appropriateMauro Carvalho Chehab
From: Ahmed S. Darwish <darwish.07@gmail.com> Use ARRAY_SIZE macro already defined in kernel.h Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06Frontends/: make 4 functions staticMauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> This patch makes four needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06merge: http://linuxtv.org/hg/~mkrufky/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06merge: http://linuxtv.org/hg/~endriss/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06Avoid race when deregistering the IR control for dvb-usbMauro Carvalho Chehab
From: Chris Rankin <rankincj@yahoo.com> The work item function is dvb_usb_read_remote_control(): INIT_WORK(&d->rc_query_work, dvb_usb_read_remote_control, d); and the last piece of work it does is: schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval)); Hence you need to call "cancel_rearming_delayed_work()" and not "cancel_delayed_work()", correct? I certainly haven't seen this oops reoccur since I applied this patch. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-05Backed out changeset a829a6ca77529b26451610ec6368ceeaa8103ebdMichael Krufky
From: Chris Rankin <rankincj@yahoo.com> Due to usb_to_input_id(), this change was completely unnecessary. These three lines are trying to do exactly what usb_to_input_id() does already. Remove them. Signed-off-by: Chris Rankin <rankincj@yahoo.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-02-04Filled in limiting values in tda827x.cHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> The parameters for minimum and maximum frequency were missing. Also added mail addresses of the module authors. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-02-04set tda827x to sleep mode after attachHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This change sets the tda827x to sleep mode right after attach in dvb mode. It is just to save power. For the same reason, the ADC of the tda10046 gets turned off in sleep mode. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-02-03Create tda827x dvb tuner moduleHartmut Hackmann
From: Michael Krufky <mkrufky@linuxtv.org> The patch moves the tda827x dvb tuning code to a separate module Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-02-03budget-av: Call saa7146_vv_release on exitOliver Endriss
From: Marco Schluessler <marco@lordzodiac.de> Call saa7146_vv_release on exit. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-02-02budget-ci: Add separate configuration data for subsystem 0x13c2:0x1012Oliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Fixed problem reported by Teemu Suikki: After a device with subsystem 0x13c2:0x1012 has been installed, devices with subsystem id 0x13c2:0x1011 did not work anymore. Reason: The driver for 0x13c2:0x1012 modified shared configuration data. Fix: Use separate configuration data for those devices. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-01-27qt1010: use i2c_gate_ctrl where appropriateMichael Krufky
From: Antti Palosaari <crope@iki.fi> This patch adds calls to i2c_gate_ctrl in the qt1010 dvb tuner module, while removing the temporary hack in au6610 and gl861. Tested successfully against fi-Oulu frequencies with MSI Megasky 580 GL861 and Sigmatek DVB-110 AU6610. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-25tda1004x: check request firmware for NULL ponter againHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> In older versions, this was used to decide whether to boot from eeprom or file. This is no longer necessary but the check helps to avoid an oops with misconfigured cards. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-01-22tda1004x driver updatesHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> There are the following changes: - separate configuration of IF and GPIOs. - set GPIOs before firmware load. This helps to avoid I2C address collisions. - if desired invert GPIOs at sleep (automatic return to analog mode of card). - added 3 tuner configuration bytes to config stuct. - added i2c gate address to config struct. - moved _state struct declaration to header file to make it accessible on board layer. - added "conf_probed" to the state struct to allow i.e. probing for correct tuner version. - changed firmware load mechanism to always: + check if already loaded + try to boot from eeprom + try downlad from host - corrected name of tda10046 firmware image (backward compatible). Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-01-21whitespace / 80-column cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21kconfig: qt1010 should be selected by gl861 and au6610Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21dvb: add new qt1010 tuner moduleMichael Krufky
From: Antti Palosaari <crope@iki.fi> gl861: (MSI Megasky) - hack for enable ZL10353 / QT1010 I2C gate - use new QT1010 module instead of old code au6610: (Sigmatek DVB-110) - hack for enable ZL10353 / QT1010 I2C gate - use new QT1010 module instead of old code Tested successfully with au6610 and gl861 devices against fi-Yllas frequencies. Now it locks perfectly with both devices. There is a "hack" to enable probable i2c gate in zl10535 demodulator. QT1010 doesn't respond to any i2c messages before we write 0x1a to demodulator register 0x62. In my understanding this should be fixed to demodulator code. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-12budget-ci: add support for the Technotrend 1500 bundled remoteMichael Krufky
From: Ville-Pekka Vainio <vpivaini@cs.helsinki.fi> The keymap is based on a previous patch by Jussi Kukkonen. This remote is identified by subsystem_device id 0x1010. Signed-off-by: Ville-Pekka Vainio <vpivaini@cs.helsinki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-07bt8xx: add support for Ultraview DVB-T LiteMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Ultraview DVB-T Lite is a clone of DViCO FusionHDTV DVB-T Lite Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-12-27Backport some changes that happened at mainstreamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Basic changes: - replaced i2c_bit_del_bus() to i2c_del_adapter(); - Fixed MODULE_AUTHOR on ov7670 - Updates on drivers not maintained on this tree: i2c-id.h and sound/* kernel-sync: drivers/media/dvb/pluto2/pluto2.c | 8 ++++---- drivers/media/video/bt8xx/bttv-i2c.c | 6 +----- drivers/media/video/cx88/cx88-core.c | 2 +- drivers/media/video/cx88/cx88-vp3054-i2c.c | 2 +- drivers/media/video/ov7670.c | 2 +- drivers/media/video/vino.c | 2 +- drivers/media/video/zoran_card.c | 2 +- include/linux/i2c-id.h | 18 ++++++------------ sound/pci/bt87x.c | 4 ++-- Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-26DVB: Remove unneeded void * casts in ttpci/av7110Mauro Carvalho Chehab
From: Tobias Klauser <tklauser@distanz.ch> The patch removes unneeded void * casts for the following (void *) pointers: - struct file: private_data - struct dvb_device: priv - struct dvb_demux: priv - struct dvb_adapter: priv The patch also contains some whitespace and coding style cleanups in the relevant areas. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-20[PATCH] Cablestar2 supportPatrick Boettcher
From: Antti Seppälä <ajhseppa@niksula.hut.fi> This patch changes the initialization of alps tdee4 tuner in flexcop-fe-tuner.c to match what is used in the old driver that was written specifically for Cablestar cards by Patrick Boettcher. This patch should make Cablestar2 work again with recent dvb drivers without breaking other stv0297 based cards. Signed-off-by: Antti Seppälä <ajhseppa@niksula.hut.fi> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-12-20[PATCH] DIB3000MC and NOVA T USB2 #2Patrick Boettcher
From: Mario Rossi <mariofutire@googlemail.com> Second part of the patch to make the autosearch work again with DiB3000P/MC. Signed-off-by: Mario Rossi <mariofutire@googlemail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-12-16Two small differences between v4l-dvb and kernel mainstream treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-16Several stuff backported from 2.6.19-git seriesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> - INIT_WORK replaced by INIT_DELAYED_WORK - struct work_struct replaced by struct delayed_work - callback parameters also changed - SLAB_KERNEL replaced by GFP_KERNEL - linux/suspend.h replaced by linux/freezer.h - on cpia: INIT_WORK replaced by INIT_WORK_NAR - file->f_dentry->d_inode replaced by file->f_path.dentry->d_inode Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-16Backported several changes from kernel 2.6.19-git seriesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Main changes: - There were several checks for usb release routines that were removed, since the routine itself checks for null values: usb_free_urb, usb_kill_urb, usb_unlink_urb Should be checked if this really happens on older kernels. - updated sound/oss/btaudio.c - replaced SLAB_ATOMIC to GFP_ATOMIC Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-16Backporting some typo fixes from kernelMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-14dvb-core: fix printk type warningMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> dvb_net.c: In function 'dvb_net_ule': dvb_net.c:628: warning: format '%#lx' expects type 'long unsigned int', but argument 3 has type 'u32' dvb_net.c:628: warning: format '%#lx' expects type 'long unsigned int', but argument 4 has type 'u32' Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-12-14dvb-core: fix bug in CRC-32 checking during ULE decapsulation on 64-bit systemsMichael Krufky
From: Ang Way Chuang <wcang@nrg.cs.usm.my> CRC-32 checking during ULE decapsulation always failed on x86_64 systems due to the size of a variable used to store CRC. This bug was discovered on Fedora Core 6 with kernel-2.6.18-1.2849. The i686 counterpart has no such problem. This patch has been tested on 64-bit system as well as 32-bit system. Signed-off-by: Ang Way Chuang <wcang@nrg.cs.usm.my> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-12-13getting rid of all casts of k[cmz]alloc() callsMauro Carvalho Chehab
From: "Robert P. J. Day" <rpjday@mindspring.com> Run this: ============== cut here ============== for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. kernel-sync: Signed-off-by: Andrew Morton <akpm@osdl.org> CC: v4l-dvb maintainer list <v4l-dvb-maintainer@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-11[NOVA-T-USB2] Put remote-debugging in the right placePatrick Boettcher
From: Mario Rossi <mariofutire@googlemail.com> This patch removes unnecessary (and misleading) debug output (it printed the values of the keys in the table up to the value of the key pressed). Signed-off-by: Mario Rossi <mariofutire@googlemail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-12-11Fix autosearch indexPatrick Boettcher
From: Mario Rossi <mariofutire@googlemail.com> After rewriting the driver the wrong autosearch index was used when COFDM-parameter needed to be detected. Thanks to Mario Rossi who found it. Signed-off-by: Mario Rossi <mariofutire@googlemail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 04:44:47 +0000