summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/cx88
AgeCommit message (Collapse)Author
2006-08-21Added missing copyrightMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Several changes at register stuff were done since commit b45009b0288a96a3458f4f8e93cb776678d41875, but I've forgot to add the copyright line for this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-17Enable audio DMA restart on channel change even when cx88-alsa is compiledRicardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> cx88-alsa can be compiled in (in distro built kernels, for example), but not used. In those cases, the audio DMA restart is needed for proper sound on NICAM channels. This patch enables the DMA restart even with ALSA, but the functions now check if cx88-alsa is really active. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2006-08-12CONFIG_PM=n slim: drivers/media/video/*Mauro Carvalho Chehab
From: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-10Reset USB part of DViCO Dual Digital during PCI driver attachChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> If the FX2 does not reset properly during reboot, it can present an invalid USB device ID and fail to attach. Prevent this situation from occuring by resetting the USB part of the card when the PCI part probes. Also fix the GPIO configurations so that analog capture will not inadvertantly reset the USB part. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2006-08-07LNB voltage control was inverted for the benefit of geniatech cards on KworldMauro Carvalho Chehab
From: Yeasah Pell <yeasah@schwide.com> 1) It sets LNBDCPol differently based on the card type. Now it should work properly for both the kworld and geniatech cards. 2) It stops returning an error for the SEC_VOLTAGE_OFF voltage command (the cx88-dvb level handles the actual voltage on/off, but it still passes the ioctl down to the cx24123 level, which previously rejected the OFF as invalid so the ioctl would report failure) Signed-off-by: Yeasah Pell <yeasah at schwide.net> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-05whitespace cleanups for cx88-dvb and saa7134-dvbMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch cleans up some whitespace problems after the dvb_attach changes in cx88-dvb.c and saa7134-dvb.c, and converts some capitalized i2c address constants to lowercase. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-08-05fix dvb_pll_attach for nxt2004-based cardsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The test in dvb-pll to see if a tuner's PLL responds when attaching fails on NXT2004 based boards before the firmware is loaded. This patch allows us to avoid this test by not passing an I2C bus handle to the dvb_pll_attach routine, just as Chris Pascoe has done for MT352 and ZL10353 based boards when used in cx88-dvb. CC: Chris Pascoe <c.pascoe@itee.uq.edu.au> CC: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-08-06dvb-pll support for MT352/ZL10353 based tuners.Chris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Typical wiring of MT352 and ZL10353 based tuners differs from dvb-pll's expectation that the PLL is directly accessible. On these boards, the PLL is actually hidden behind the demodulator, and as such can only be accessed via the demodulator's interface. It was failing to communicate with the PLL during an attach test and subsequently not connecting the tuner ops. By passing a NULL I2C bus handle to dvb_pll_attach, this accessibility check can be bypassed. Do this for the affected boards. Also fix a possible NULL dereference at sleep time, which would otherwise be exposed by this change. Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2006-08-02Add missing dvb-pll Kconfig infrastructure.+ CTL_SMC_PHY,Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Add missing dvb-pll Kconfig infrastructure. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-07-30Fix a typo that caused some compat stuff to not workMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Config option typo: -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-28Remove frontend selection from cx88/saa7134 driversAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Replaced with dvb_attach() Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-28Add Kconfig infrastructure for dvb_attachAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Allow it to be en/disabled Disable it in < 2.6.17 due to symbol_xxx() bug Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-28Convert DVB devices to use dvb_attach()Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Only devices using > 1 frontend were ported; ones which did not are left using static binding. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-24OVERLAY flag were enabled by mistakeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> A patch from Aug, 17 activated by mistake OVERLAY flag on cx88-video, together with several cx88-blackbird cleanups. This makes the cx88 driver to report: /dev/video0 [v4l2]: ioctl VIDIOC_G_FBUF: Invalid argument instead of: /dev/video0 [v4l2]: no overlay support Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-24cx88: Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann PCI TV Tuner card supportMichael Krufky
From: David Bussenschutt <buzz@oska.com> Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for Swann PCI TV Tuner Card Signed-off-by: David Bussenschutt <buzz@oska.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-24cx88: add support for Norwood PCI TV Tuner (non-pro)Michael Krufky
From: Peter Naulls <peter@chocky.org> This patch adds support for Norwood PCI TV Tuner (non-pro) Signed-off-by: Peter Naulls <peter@chocky.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-24cx88: add autodetection support for AverMedia M150-DMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch adds autodetection support for the AverMedia M150-D blackbird MPEG encoder / analog video capture card. This board is known to work with the ASUS PVR 416 configuration. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-24cx88: add initial support for Hauppauge HVR3000 trimode cardMichael Krufky
From: Eric Thomas <ethomas@claranet.fr> add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T only analog is working for now Signed-off-by: Eric Thomas <ethomas@claranet.fr> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-23Fix for compilation without V4L1 or V4L1_COMPATMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Removed usage of HAVE_V4L1 Including videodev.h will just include videodev2.h if V4L1 is not supported V4L1 code at core drivers will honor CONFIG_V4L1_COMPAT stuff Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19Removed the remaining config.h stuffMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since kernel include autoconf.h via command line, those config.h inclusion can be removed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19[PATCH] release_firmware() fixesMauro Carvalho Chehab
From: Magnus Damm <magnus@valinux.co.jp> Use release_firmware() to free requested resources. According to Documentation/firmware_class/README the request_firmware() call should be followed by a release_firmware(). Some drivers do not however free the firmware previously allocated with request_firmware(). This patch tries to fix this by making sure that release_firmware() is used as expected. kernel-sync: backport from kernel to v4l/dvb tree Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19[PATCH] 64bit resource: fix up printks for resources in video driversMauro Carvalho Chehab
From: Greg Kroah-Hartman <gregkh@suse.de> This is needed if we wish to change the size of the resource structures. kernel-sync: backport from kernel to v4l/dvb tree Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19[PATCH] irq-flags: media: Use the new IRQF_ constantsMauro Carvalho Chehab
From: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-17Bugfix for keycode calculation on NPG remotesRicardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> Fix keycode calculations (all codes for this remote were wrong due to a lost + sign) Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2006-06-29cx88: add support for Geniatech Digistar / Digiwave 103gMichael Krufky
From: Saqeb Akhter <johoja@gmail.com> This patch adds support for the Geniatech Digistar, aka Digiwave 103g DVB-S card. Signed-off-by: Saqeb Akhter <johoja@gmail.com> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-06-27merge: http://linuxtv.org/hg/~mkrufky/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-27kernel sync: use list_move() and fix a typoMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This patch works fine with previous kernel versions (tested up to 2.6.12). kernel-sync Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-26Remove all instances of request_module("tda9887")Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> We should no longer try to load the tda9887 module, because it no longer exists. The tda9887 driver has been merged into the tuner module. This patch removes all instances of request_module("tda9887") from the following video4linux drivers: bttv, cx88, em28xx and saa7134. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-06-26cx88-blackbird: implement VIDIOC_QUERYCTRL and VIDIOC_QUERYMENUMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch implements the newer v4l2 control features to make the standard user controls and mpeg encoder controls of cx88-blackbird video encoder boards available to userspace. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-06-26Pass an explicit log prefix to cx2341x_log_statusHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> A card number is not unique enough. Instead, let the caller specify the prefix of the status messages. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-06-25cx88-blackbird: implement VIDIOC_LOG_STATUSMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> implemented VIDIOC_LOG_STATUS in the cx88-blackbird driver to show the status of i2c clients and the cx23416 mpeg encoder. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-06-25Sync changes with alsa stuff at kernelMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-24make VIDEO_CX88_BLACKBIRD a separate build optionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch creates a new Kconfig menu option, entitled, "Blackbird MPEG encoder support (cx2388x + cx23416)" so that the cx88-blackbird mpeg encoder module can be chosen separately. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-06-24cx88: cleanupsMichael Krufky
From: Adrian Bunk <bunk@stusta.de> remove the following unused hooks: - cx88-blackbird.c: cx88_ioctl_hook() - cx88-blackbird.c: cx88_ioctl_translator() make the following needlessly global functions static: - cx88-tvaudio.c: cx88_detect_nicam() remove the following unused EXPORT_SYMBOL's: - cx88-cards.c: cx88_bcount - cx88-cards.c: cx88_subids - cx88-cards.c: cx88_idcount - cx88-cards.c: cx88_card_list - cx88-cards.c: cx88_card_setup - cx88-core.c: cx88_start_audio_dma - cx88-core.c: cx88_stop_audio_dma - cx88-i2c.c: cx88_i2c_init Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-06-23merge: http://linuxtv.org/hg/~mkrufky/mpeg-apiMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-23merge: http://linuxtv.org/hg/~hverkuil/mpeg-apiMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-22cx88: clear EN_I2SIN_ENABLE bit for ASUS PVR-416 to enable audioMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> clear EN_I2SIN_ENABLE bit for ASUS PVR-416 to enable audio streaming in both raw video and blackbird mpeg encoder modes. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-06-22cx88-blackbird: always set encoder height based on tvnorm->idMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Removed the switch..case block in blackbird_probe for setting encoder height based on video standard. All blackbird devices can rely on tvnorm->id to retrieve this information from the cx2388x video decoder - tuner_formats should not be used to determine the encoding video standard. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-06-21CX2341X port was always set to 'memory', but 'streaming' is also possibleHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> ivtv uses the memory (DMA) interface with the CX2341X, while pvrusb2 and cx88-blackbird use the streaming interface. This setting is now selectable by the driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-06-21cx88: add support for FusionHDTV 3 Gold (original revision)Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add support for FusionHDTV 3 Gold (original revision), using the card definition for FusionHDTV3 Gold-Q Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-06-21merge: http://linuxtv.org/hg/~rmcc/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-20Whitespace cleanupsMauro Carvalho Chehab
From: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-19cx88-tvaudio.c must #include <linux/config.h>Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-06-19Backed out changeset e3215d345e206c37b4a72a6f41d0a8c6696de3faMichael Krufky
2006-06-18Put old MPEGCOMP API under #if __KERNEL__ and issue warnings when used.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-06-18Port cx88-blackbird to the new MPEG API.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-06-18Add CX2341X MPEG encoder module.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Adds the cx2341x.c module that handles the programming of the Conexant cx23415/6 MPEG encoder chip used by cx88-blackbird, pvrusb2 and ivtv. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-06-18Use saner defaults for cx88 contrastRicardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> The default value for contrast in cx88 cards was 25%; this worked OK, except when applications enforced their own defaults (like MythTV), and it was different from other defaults (Hue/Brightness/Saturation) that used 50%. The value for contrast has been offset so the default is now 50% (as with other controls), giving the same result as the previous 25% setting. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2006-06-18Don't kill cx88 DMA sound on channel changeRicardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> There's a call at cx88-tvaudio to reset DMA sound on channel change; that call was killing cx88-alsa whenever the channel was changed, resulting in no sound. Remove those calls if cx88-alsa is selected to be compiled. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2006-06-18Fix cx88-alsa vs IRQ remote conflictRicardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> cx88-alsa was resetting the card on load, causing the IRQ IR handler to go away (maybe others, too). There's no actual need to reset the card, though, so that line was removed Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 11:02:36 +0000