Age | Commit message (Collapse) | Author |
|
- snd register working. Also Capture control.
- pending: pcm functions and fix some trouble when inserting it
with other cx88 functions (cx8800) for example.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- This patch addresses valid objections to experimental code used to
mute the tda9887 when the tuner is used for digital TV reception.
That code is removed and replaced by a better solution. Comments
have been added, indicating that t_standby should be implemented
in the future.
Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Added support for future alsa support, yet to be finished.
* bt87x-alsa.c:
- bt87x.c that is inside ALSA tree. Yet to make it compile from here.
* cx88-alsa.c,cx88.h:
- cx88 ALSA skeleton. It is not yet working.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Added some comments about DMA stuff.
- Removed obsolete code.
* tea5761.c:
- Removed an incorrect comment that cames from tea5767.c file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
|
|
- local var renamed from rc5 to a better name (ircode).
- Added a new NEC protocol based on pulse distance.
Signed-off-by: Uli Luckas <luckas@musoft.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Support for BTSC improved.
Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- replaced hex values when writing to AUD_CTL to EN_xx for better reading.
- Moved writing to register AUD_CTL from "set_audio_start" to
"set_audio_finish".
- Changed the order of writing Lang2 to work correctly
- Added an "#if 0" to comment out existing code in "cx88_get_stereo"
because simply reading from register "AUD_STATUS" is _not_ enough to
auto-detect btsc-sap, dual-fm-stereo or nicam. It is simply not working.
- Using "EN_A2_AUTO_STEREO" does not work.
- Allow select by hand between Mono, Lang1, Lang2 and Stereo.
- *Bad side effect* is now if I'm selecting for example stereo but it is not
supported from tv-channel I'm currently receiving loud noise.
Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
From: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- added tda9887_conf to DViCO FusionHDTV5 Gold (card #31).
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
card=28 DViCO FusionHDTV3 Gold-T
card=31 DViCO FusionHDTV5 Gold
No noticeable change in behavior.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
|
|
|
|
- Corrected PLL programming for FusionHDTV5 Gold.
Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- convert ugly if-else statement to switch-case.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- update for FusionHDTV 5 Gold.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- adapt lgdt330x calls to structural changes within lgdt330x driver.
- add testing code for FusionHDTV5 Gold ATSC support. .dvb is #if 0'd
in cx88-cards.c It will be enabled after successful testing w/ hw.
Signed-off-By: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
|
|
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- The #define CONFIG_DVB_* are actually CFLAGS set my Makefile.
CONFIG_* namespace is reserved for Kconfig.
This renames them back to HAVE_*.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Added DVB card setup for DViCO FusionHDTV5 Gold using TUA6034 pll.
This code is currently #if 0. It will be enabled
when lgdt3303 (or lgdt330x) is ready.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Added analog support for DViCO FusionHDTV5 Gold.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
* scripts/merge-trees.sh, scripts/unmerge-trees.sh:
- fix compilation warning for missing lgdt3302 when
compiling against kernel 2.6.12 without DVB tree.
- replaced #IF CONFIG_DVB_* with #IFDEF CONFIG_DVB_*
- include linux/config.h
- Let kconfig / Makefile decide to include frontend-specific code.
(Properly functioning now)
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- It is importand to write at first to MO_GP3_IO, see datasheet
on page 77: "2.3.3 GPIO Normal Mode". Importand is Bit 25 (GP3_MODE),
or it is already done in file "cx88-video.c" at
"static int video_mux(struct cx8800_dev *dev, unsigned int input)".
From: Torsten Seeboth <Torsten.Seeboth@t-online.de>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Add support for the SVideo input on the GDI Black Gold.
From: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Removed unnecessary comment.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Select the RF input connector based upon the type of
demodulation selected. ANT RF connector is selected for
8-VSB and CABLE RF connector is selected for QAM64/QAM256.
This only affects the cards that use the Microtune 4042 tuner.
- This is patch #2 of a string of patches with counterparts in the
dvb-kernel tree affecting lgdt3302.c and lgdt3302.h
Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Remove the dvb_pll_desc from the frontend and replace with a
pll_set-callback to isolate the tuner programming from the frontend.
- This is patch #1 of a string of patches with counterparts in the
dvb-kernel tree affecting lgdt3302.c and lgdt3302.h
Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Removed remaining trailing spaces.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Fix corrected.
Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- The output_mode needs to be set for the Hauppauge Nova-T DVB-T
(cx88-dvb.c) for versions after 2.6.12.
Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Newer tea autodetection code is not stable. Restaured old
behavior.
* tuner-core.c:
- new option no_autodetect to disable tuner autodetection codes.
* cx88-cards.c:
- There are newer PixelView Ultra cards without tea chips.
Radio and addresses unset to allow autodetection.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
where KERNEL_VERSION is required.
- incremented versions for CX88, BTTV and SAA7134.
* compat.h:
- Included linux/version.h.
This change is required to be compatible with
a patch applied at Kernel by Olaf Hering <olh@suse.de>
this patch does reduce kernel dependency of its version number.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
* cx88-video.c:
- After changing channels, reconfigure audio parameters.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Always include dvb frontend code for hybrid cx88 and saa7134 boards.
A previous change breaks hybrid v4l/dvb boards in 2.6.13-rc2-mm2.
This fixes the bug. We will have to figure out
something better in the future.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Some debug structs moved to their own .c file and converted to static
- some // comments converted to #if 0
* cx88-mpeg.c:
- Small cleanup for thinks like 0<<14
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Added code to eliminate #if 0 and #if 1 when submiting pathes
to new kernel.
Miscelaneous CodingStyle stuff.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Correct sync byte for MPEG-2 transport stream packets.
All DVB compliant frontends output packets with this start code.
Thanks to Johannes Stezenbach and Mac Michaels.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
saa7134-cards.c
|
|
* dvb-pll.c, dvb-pll.h:
- Add DVB support for DViCO FusionHDTV3 Gold-T.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Let Kconfig decide whether to include
frontend-specific code in saa7134-dvb.
* cx88-video.c:
- added missing contrast offset value, set to 0.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Let Kconfig decide whether to include frontend-specific code.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
* tuner-core.c:
- Added some comments about I2C working mode.
- Frequency initialized for radio and TV.
* cx88-video:
- It calls VIDIOC_G_FREQUENCY to get tuner freq from tuner.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- I2C cleanups. Now, all drivers uses the same basic structure.
* cx88-video.c:
- Duplicated code commented. Should be removed soon.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
* saa7134-cards.c, saa7134-core.c, saa7134-i2c.c:
* tuner-core.c, tuner.h:
Rename v4l2_tuner field in tun_addr structure. Cleanup
tuner private calls.
|
|
* doc/CARDLIST.cx88:
- Add support for TerraTec Cinergy 1400 DVB-T.
Signed-off-by: Uli Luckas <luckas@musoft.de>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
Now, 50% Hue means no offset, just like bt878 stuff.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|