summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/pvrusb2
AgeCommit message (Collapse)Author
2006-09-03Fix broken pvrusb2 buildMike Isely
From: Mike Isely <isely@pobox.com> Fix broken build when 24XXX support is not selected. This is required due to the requirement of removing 24XXX ifdef's from the driver source. Signed-off-by: Mike Isely <isely@pobox.com>
2006-09-02Improve resolution limit enforcements in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> The pvrusb2 driver resolution limits are now programmed the following way, based on empirical measurements of the hardware: Vertical max: 480 for NTSC, 576 otherwise Vertical min: 75 for 24xxx, 17 otherwise Horizontal max: 720 Horizontal min: 720 for 24xxx, 19 otherwise Signed-off-by: Mike Isely <isely@pobox.com>
2006-09-02Remove CONFIG_VIDEO_PVRUSB2_24XXX from pvrusb2 driverMike Isely
From: Mike Isely <isely@pobox.com> Support for 24xxx devices was previously explicitly bracketed with CONFIG_VIDEO_PVRUSB2_24XXX inside the code because we didn't trust the stability of these changes. We trust it now; so there's no reason to leave this out of the driver anymore. Signed-off-by: Mike Isely <isely@pobox.com>
2006-09-02Remove some dead data elements from pvrusb2 driverMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-09-02Partially reverting last patchMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Last patch did included two experimental stuff there, on cx88 and on pvrusb2. Reverting... Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-02Fixes some troubles on saa7115Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Scaling were not working fine; Some reserved registers were wrong; On some situations, saa7115 were not properly being initializated. Removed some duplicated code. Thanks-to: Hans Verkuil <hverkuil@xs4all.nl> for co-working on this patch. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-01Fix VIDIOC_S_FMT min/max check in pvrusb2Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-08-30Fix a typo.Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26Add u32 argument to VIDIOC_INT_RESET.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The extra argument makes it possible to reset subsystems of a chip if that is supported. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-08-22Allow manually selecting the proper helper driversMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> There are several boards on V4L that can work with several different helper modules for audio/video encoding/decoding and similar stuff. This patch adds the capability of choicing between autoselecting the pertinent helper modules for each driver, or to manually selecting them. Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08Fix a warning on PPC64Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c: In function 'set_standard': drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c:33: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'v4l2_std_id' Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-27Force horizontal resolution limits in the pvrusb2 driverMike Isely
From: Mike Isely <isely@pobox.com> This change causes the pvrusb2 driver to limit horizontal resolution to be only 720 if 24xxx device hardware is being used. This is a workaround for an unsolved problem in the driver where if the resolution is set to something other than 720 the video quality will be _seriously_ degraded. It only happens on 24xxx devices (29xxx are unaffected by the problem and unaffected by this change). Once the problem is finally solved, this small change can be removed. Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-27Make it possible for run-time calculation of control min/max in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> The internal control implementation in the pvrusb2 driver normally encodes integer range limits using literal values in a const structure. This change adds two function pointers, which if not null will be called through in order to determine integer min / max values. Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-26Eliminate hardcoded limits in VIDIOC_[S|TRY]_FMT for pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> The pvrusb2 implementation for VIDIOC_[S|TRY]_FMT was hardcoding limits on the range for allowed resolution, but it would be much better if we instead just queried the internal control for these values. This then opens the door for the driver to adjust these limits based on the detected hardware. Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-22Correctly handle sysfs error leg file removal in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Take note of which sysfs files / groups that the pvrusb2 successfully creates and only delete those specific items when tearing things down. (Previously we just blindly tore everything down every time.) Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-22Clean up some post mpeg-controls issues in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Fix a few miscellaneous issues in the pvrusb2 driver related to use of the new mpeg controls. This also should fix problems involving update of the saa7115 / cx25840 configuration as control changes are made. Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-19Removed the remaining config.h stuffMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since kernel include autoconf.h via command line, those config.h inclusion can be removed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-18Refine dead code elimination in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-18pvrusb2: check the return value of class_device_create_fileMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> class_device_create_file is marked as __must_check, so its return value must be checked. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-18pvrusb2: check the return value of class_device_registerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> If an error occurs during class_device_register, print an error message, kfree(class_dev) and return. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-06-30Clean out a zillion sparse warnings in pvrusb2Mauro Carvalho Chehab
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30Pvrusb2/: possible cleanupsMauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> This patch contains the following possible cleanups: - make needlessly global code static - #if 0 unused global functions Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-29Eliminate use of tda9887 from pvrusb2 driverMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-29Always log pvrusb2 device register / unregister eventsMike Isely
From: Mike Isely <isely@pobox.com> Previously the pvrusb2 driver was conditionalizing printing of the device register / unregister messages against a debug mask. This sort of information should always appear, thus this patch. Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-27Fix warning when compiling on 64 bit machinesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-26Included required header for in-kernel compilationMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-26Pass an explicit log prefix to cx2341x_log_statusHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> A card number is not unique enough. Instead, let the caller specify the prefix of the status messages. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-06-26SYSFS support marked as experimentalMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25Reduce the amount of pvrusb2-sourced noise going into the system logMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Implement use of cx2341x module in pvrusb2 driverMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Exploit new V4L control features in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Don't suspend encoder when changing its attributes (in pvrusb2)Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Fix faulty encoder error recovery in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Various V4L control enhancements in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Handle boolean controls in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Make sure flags field is initialized when quering a control in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Move LOG_STATUS bracketing to a different part of the pvrusb2 driverMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Rearrange things in pvrusb2 driver in preparation for using cx2341x moduleMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Increase the maximum number of controls that pvrusb2-sysfs.c can handle.Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Clean up long-standing video format handling mess in pvrusb2-v4l2.cMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Don't print empty enum values in pvrusb2-sysfs.cMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Rearrange things in pvrusb2-encoder in preparation for use of cx2341x moduleMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-25Include some extra headers that we need.Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-06-18Add CX2341X MPEG encoder module.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Adds the cx2341x.c module that handles the programming of the Conexant cx23415/6 MPEG encoder chip used by cx88-blackbird, pvrusb2 and ivtv. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-06-11pvrusb2 is now a V4L2 driver. Fixed Kconfig.Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-08Remove last bits of V4L1 dependant codeMike Isely
From: Mike Isely <isely@pobox.com> With the removal of the V4L1 API, we also lose the functionality provided by the video_get_drvdata() and video_set_drvdata() functions. These functions had made it possible for a driver to stuff a pointer to its own context inside the V4L device handle context - a useful ability. However now that's going away, so the driver is on its own to find its context when called into from a more generic context (e.g. the open() entrypoint). The changes in this patch implement a global context mapping array, an array index back-reference per instance, and a new global mutex to protect the entire thing. The array is indexed by the minor device id of the V4L device inode. All this fun is present to work around what used to be roughly 4 lines of code. Sigh... Signed-off-by: Mike Isely <isely@pobox.com>
2006-05-07bug-fix: pvrusb2 must #include <linux/config.h> for compile-time optionsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Added necessary header file in order for kconfig build options to be considered at compile time. Without this patch all options will always be disabled, regardless of whether they are selected or not. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Mike Isely <isely@pobox.com>
2006-05-04pvrusb2: use encoder firmware filename defined in cx2341x.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch removes the explicit definition of the cx23416 encoder firmware image filename, in favor of CX2341X_FIRM_ENC_FILENAME as defined in cx2341x.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Mike Isely <isely@pobox.com>
2006-04-25Remove pvrusb2 video standard adjustment logicMike Isely
From: Mike Isely <isely@pobox.com> Remove logic which tries to infer additional video standards based on what was reported by tveeprom. Signed-off-by: Mike Isely <isely@pobox.com>
2006-04-25Various pvrusb2 video standard cleanupsMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-24 12:33:19 +0000