| Age | Commit message (Collapse) | Author |
|---|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Michael Krufky <mkrufky@kernellabs.com>
Enable the standby mode optimization to disable the tda18271
slave tuner output / loop thru options when in low power mode
Priority: normal
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
|
|
From: Jean Delvare <khali@linux-fr.org>
There is no point in defining I2C adapter IDs when no code is using
them. As this field might go away in the future, stop using it when
we don't need to.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mike Isely <isely@pobox.com>
This change does not change any outward behavior; it merely chops down
some large if-conditions with embedded assignments into something a
little more maintainable for others (I of course never had a problem
with this...).
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
The pvrusb2 driver has a concept of "routing scheme" which defines
which physical inputs should be connected based on application's
choice of logical input. The correct "routing scheme" depends on the
specific device since different devices might wire up their muxes
differently - it can't be coded into the sub-device driver and it
can't be just a single setting in the pvrusb2 driver since the driver
handles multiple different devices. This concept has been in place
for a while and works, however there are cases where a specific input
for a specific device has no route - previously due to an oversight
this was handled badly. With these changes the driver can now
specifically recognize cases where there is no defined route for a
given input.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Change default frequency to be US Broadcast channel 3 - with the
transition to d igital the previous value has now become useless.
This change is PURELY to help with my testing (I need to set some kind
of default so it might as well be some thing usable).
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
The cx25840 module's VBI initialization logic uses the current video
standard as part of its internal algorithm. This therefore means that
we probably need to make sure that the correct video standard has been
set before initializing VBI. (Normally we would not care about VBI,
but as described in an earlier changeset, VBI must be initialized
correctly on the cx25840 in order for the chip's hardware scaler to
operate correctly.)
It's kind of messy to force the video standard to be set before
initializing VBI (mainly because we can't know what the app really
wants that early in the initialization process). So this patch does
the next best thing: VBI is re-initialized after any point where the
video standard has been set.
Priority: high
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
The cx25840 module requires that its VBI initialization entry point be
called in order for hardware-scaled video capture to work properly -
even if we don't care about VBI. Making this behavior even more
subtle is that if the capture resolution is set to 720x480 - which is
the default that the pvrusb2 driver sets up - then the cx25840
bypasses the hardware scaler. Therefore this problem does not
manifest itself until some other resolution, e.g. 640x480, is tried.
MythTV typically defaults to 640x480 or 480x480, which means that
things break whenever the driver is used with MythTV.
This all has been known for a while (since at least Nov 2006), but
recent changes in the pvrusb2 driver (specifically in regards to
sub-device support) caused this to break again. VBI initialization
must happen *after* the chip's firmware is loaded, not before. With
this fix, 24xxx devices work correctly again.
A related fix that is part of this changeset is that now we
re-initialize VBI any time after we issue a reset to the cx25840
driver. Issuing a chip reset erases the state that the VBI setup
previously did. Until the HVR-1950 came along this subtlety went
unnoticed, because the pvrusb2 driver previously never issued such a
reset. But with the HVR-1950 we have to do that reset in order to
correctly transition from digital back to analog mode - and since the
HVR-1950 always starts in digital mode (required for the DVB side to
initialize correctly) then this device has never had a chance to work
correctly in analog mode! Analog capture on the HVR-1950 has been
broken this *ENTIRE* time. I had missed it until now because I've
usually been testing at the default 720x480 resolution which does not
require scaling... What fun. By re-initializing VBI after a cx25840
chip reset, correct behavior is restored.
Priority: high
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Mostly due to ir-kdb-i2c, but also due to two new drivers, compilation
with kernels older than 2.6.29 were broken.
This quick and dirty changeset, generated semi-automatically, restaures
backport to the subsystem by adding lots of #ifs.
It is possible to write a much more small changeset that would restore
backport without adding so many ifs, but, due to the lack of time, this
will also solve it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Steven Toth <stoth@kernellabs.com>
pvrusb2: Ensure we specify I/F's for all bandwidths
Priority: normal
Signed-off-by: Steven Toth <stoth@kernellabs.com>
|
|
From: Jean Delvare <khali@linux-fr.org>
Now that the ir-kbd-i2c driver has been converted to a new-style i2c
driver, we can instantiate the ir_video I2C device by default. The
pvr2_disable_ir_video is kept to disable the IR receiver, either
because the user doesn't use it, or for debugging purpose.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Roel Kluin <roel.kluin@gmail.com>
Remove redundant tests on unsigned.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Greg Kroah-Hartman <gregkh@suse.de>
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device. Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used. These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.
Priority: normal
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Jean Delvare <khali@linux-fr.org>
The i2c core used to maintain a list of client for each adapter. This
is a duplication of what the driver core already does, so this list
will be removed as part of a future cleanup. Anyone using this list
must stop doing so.
For pvrusb2, I propose the following change, which should lead to an
equally informative output. The only difference is that i2c clients
which are not a v4l2 subdev won't show up, but I guess this case is
not supposed to happen anyway.
Priority: normal
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Kick up the pvrusb2 version number advertised through the v4l
interface. This value really has almost no meaning because I don't
make a serious attempt to version the driver in this manner (otherwise
this one line becomes a nasty hotspot of changes and merge
conflicts). The value that is here is really a historical thing.
However Hans Verkuil thought it might be a good idea to bump up the
number anyway right now since the driver's mechanism for communicating
with the v4l core has pretty much completely changed. Sending out a
different version number can be useful for later debugging in case a
problem arises.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
This sets the disable_autoload_ir_video module option to being set,
which disables any attempt by the driver to autoload IR support. This
changes preserves previous behavior, for now. This change can be set
back concurrent with other changes that finally update i2c-kbd-i2c to
use the new i2c binding model.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
The ir-kbd-i2c module is about to be updated to match the new style
i2c binding model. These pvrusb2 changes maintain compatibility with
that change. Note that this does not actually break anything even
without the expected ir-kbd-i2c changes yet because previously the
pvrusb2 didn't autoload ir-kbd-i2c anyway.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Greg Kroah-Hartman <gregkh@suse.de>
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device. Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used. These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Steven Toth <stoth@linuxtv.org>
... else DVB-T tuning will not work.
Priority: high
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
pvrusb2: Ensure we specify the I/F at attach time.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
kernel-sync:
Author: David Vrabel <david.vrabel@csr.com>
Date: Wed Apr 8 17:36:28 2009 +0000
USB: add reset endpoint operations
Wireless USB endpoint state has a sequence number and a current
window and not just a single toggle bit. So allow HCDs to provide a
endpoint_reset method and call this or clear the software toggles as
required (after a clear halt, set configuration etc.).
usb_settoggle() and friends are then HCD internal and are moved into
core/hcd.h and all device drivers call usb_reset_endpoint() instead.
If the device endpoint state has been reset (with a clear halt) but
the host endpoint state has not then subsequent data transfers will
not complete. The device will only work again after it is reset or
disconnected.
CC: Mike Isely <isely@isely.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mike Isely <isely@pobox.com>
This change defines all possible "IR schemes" related to the pvrusb2
driver, on a per-device basis. That information is then set according
to the hardware in use. The idea here is to make possible a more
intelligent future decision on which, if any, IR receiver driver might
be loaded during initialization.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Jean Delvare <khali@linux-fr.org>
The client_register and client_unregister methods are optional so
there is no point in defining stub ones. Especially when these methods
are likely to be removed soon.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
It is no longer needed to use a struct pointer as argument, since v4l2_subdev
doesn't require that ioctl-like approach anymore. Instead just pass the input,
output and config (new!) arguments directly.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Janne Grunau <j@jannau.net>
Priority: normal
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Any time a struct (especially one not defined by this driver) is
allocated, we MUST zero its underlying storage. This makes our usage
of the struct predictable and robust against future changes where
fields might be added that we don't know about. Failing to do this
with tuner_setup left the config field uninitialized which then caused
trouble with the tuner type used for HVR-1950 devices.
Priority: high
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: high
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
new_(probed)_subdev
From: Hans Verkuil <hverkuil@xs4all.nl>
The functions v4l2_i2c_new_subdev and v4l2_i2c_new_probed_subdev relied on
i2c_get_adapdata to return the v4l2_device. However, this is not always
possible on embedded platforms. So modify the API to pass the v4l2_device
pointer explicitly.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
s_std didn't belong in the tuner ops. Stricly speaking it should be part of
the video ops, but it is used by audio and tuner devices as well, so it is
more efficient to make it part of the core ops.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
The init callback was used in several places to load firmware. Make a separate
load_fw callback for that. This makes the code a lot more understandable.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Kyle McMartin <kyle@redhat.com>
As pointed by Steve Dickson, pvrusb2 Makefile was not compiling
pvrusb2-cx53l32a driver.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Forgot to include the tda9887 component when moving to v4l2-subdev. I
got fooled because its name is "tuner", the same as the tuner module.
Silly me.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Remove ancient IVTV_IOC_G_CODEC and IVTV_IOC_S_CODEC ioctl functions
from the pvrusb2 driver. These are very very old, were non-standard,
and were only present to keep MythTV happy (their implementation did
nothing except to report success). That was long ago; no recent
versions of MythTV should require this anymore.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
This change removes the old i2c module controlling layer from the
pvrusb2 driver. This is code that first had appeared in the driver
back in December 2005. It's history. Now we use v4l2-subdev. Please
note also that with this change, the driver will no longer be usable
in kernels older that 2.6.22.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
The v4l2-subdev infrastructure requires that an initialization call
must be issued to all attached sub-devices before normal operation can
start. This change satisfies that requirement.
Priority: normal
Signed-off-by: Mike Isely <isely@pobox.com>
|
