| Age | Commit message (Collapse) | Author |
|---|
|
From: Mike Isely <isely@pobox.com>
Code in pvrusb2 which issues stream on/off commands was previously in
a place specific to the saa7115. This change moves that function to a
place where it can be used for other things (like controlling a future
cx25840).
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
When a control change is committed to the driver, certain other parts
of the driver must be updated to track the change and deal with the
effects of that change. Some controls in the driver use a function
pointer to implement the commit, however we weren't doing the tracking
there and we should have been. This is the fix.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
The pvrusb2 driver was not correctly identifying and handling the
tda9887 module. This is the bug fix (code had been ifdef'ed out which
should not have been).
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Implement pvrusb2 code normally compiled-out which can print useful
information about commands issued to the hardware.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
This change threads logic through the pvrusb2 to make it possible to
command the decoder chip to reset itself. The method is
decoder-agnostic; the part of the pvrusb2 which control's that chip's
module has to provide the final hook. This just lays the foundation.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Rename a pvrusb2 function to reflect its true meaning, and tweak the
driver initialization sequence so that the I2C adapter isn't started
until after the hardware has been given a powerup command.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
merge:
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Add a new audio mode V4L2_TUNER_MODE_LANG1_LANG2 (used by VIDIOC_G/S_TUNER).
This mode allows the user to select both languages of a bilingual transmission,
one language on the left, one on the right audio channel. If there is no
bilingual transmission, or it is not supported, then this mode should act like
V4L2_TUNER_MODE_STEREO.
This mode is introduced for PVR-like drivers where it is useful to be able to
record both languages of a bilingual broadcast.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
- implement VIDIOC_INT_S_AUDIO_ROUTING for msp3400 and tvaudio
- use the new command in bttv, pvrusb2 and em28xx.
- remove the now obsolete MSP_SET_MATRIX from msp3400 (yeah!)
- remove the obsolete VIDIOC_S_AUDIO from msp3400.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Moved msp3400.h to msp3400-driver.h.
Created media/msp3400.h with the new routing defines and lots of comments.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Cleanup audio input handling in bttv and tvaudio:
- inputs were specified that were never used
- mute was handled as a special input which led to confusing code
- confusing naming made it difficult to see if the setting was for
i2c or gpio.
The old audiochip.h input names moved to tvaudio.h. Currently this
is used both by tvaudio and msp3400 until the msp3400 implements the
new msp3400-specific inputs.
Detect in bttv the tvaudio and msp3400 i2c clients and use these
client pointers to set the inputs directly instead of broadcasting the
command.
Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be
replaced again later by the new ROUTING commands.
Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is
a user level command and not to be used internally. It wasn't called at
all anyway.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Mike Isely <isely@pobox.com>
The PVR USB2 hardware seems to like emitting some garbage data before
real stream data appears. This problem has been present all along,
but with the older 29xxx model series it was benign because the
garbage data in question didn't seem to bother mpeg2 players. But
with the 24xxx model series, the garbage data includes what looks like
a corrupted mpeg2 packet, which kills mythtv and ffmpeg. This fix
causes incoming stream data to be discarded until valid mpeg2 data is
seen.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Add a new audio mode V4L2_TUNER_MODE_LANG1_LANG2 (used by VIDIOC_G/S_TUNER).
This mode allows the user to select both languages of a bilingual transmission,
one language on the left, one on the right audio channel. If there is no
bilingual transmission, or it is not supported, then this mode should act like
V4L2_TUNER_MODE_STEREO.
This mode is introduced for PVR-like drivers where it is useful to be able to
record both languages of a bilingual broadcast.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- replace VIDEO_DECODER with VIDEO_SAA711X
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
The msp3400 driver is currently only being built if
the bttv driver is selected. There are new drivers
that will be needing msp3400, so simply including
msp3400 in the Makefile is no longer appropriate.
This patch creates VIDEO_MSP3400, and alters VIDEO_BT848, VIDEO_PVRUSB2
and VIDEO_AUDIO_DECODER each to select VIDEO_MSP3400.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Move MODULE_DEVICE_TABLE to pvrusb2-hdw.c, in order to solve
compilation issue where that macro is pointing to an external symbol.
I have not seen this problem, but others have and so I'm fixing the
code. Different behavior is likely tied to gcc version in use.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- Changed all occurances of "#ifdef notdef" to "#if 0"
- This code will remain visible in the v4l-dvb repositories,
but will be held back from git.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- add pvrusb2 to the kernel build
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- device registration messages altered to conform with the other v4l drivers.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- Add a ':' after 'pvrusb2' for kernel message output.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Mike Isely <isely@pobox.com>
Clean up a missing const declaration in the initialization pathway of
the pvrusb2 driver.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
The V4L2 control limit for frequency is too low. This change raises
the limit to a more reasonable maximum.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Notice and track actual hardware type of device. This information is
also used now to select the correct FX2 firmware file to load (because
they can be different, unfortunately).
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
It has been discovered that newer PVR USB2 needs incompatibly
different FX2 firmware. The driver therefore needs to make the file
name a function of which firmware flavor is required. This rename is
part of that work.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
The pvrusb2 driver as part of its initialization might have to load
the FX2's firmware image. We must only do this when it is actually
needed. The previous method just detected this requirement by
noticing something unusual about the USB configuration of the device.
Unfortunately with newer PVR USB2 devices this method no longer works.
What we do now is also attempt a simple non-destructive endpoint 1
transaction; failure of that transfer will indicate a need to load the
firmware.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
The wire protocol to the PVR USB2 hardware limits the total size of an
I2C write transfer (among other things). The driver detects this case
and fails the transfer; this change also logs the message. We need
this in order to catch V4L modules which might be attempting such
transfers and deal with them on a case-by-case basis.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- removed 'make pvrusb2' merge command
- created in-kernel Makefile, Kconfig not yet done.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
