summaryrefslogtreecommitdiff
path: root/linux/drivers
AgeCommit message (Collapse)Author
2006-09-10merge: http://linuxtv.org/hg/~rmcc/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10Problem with dibusb-mb.c USB IDsPatrick Boettcher
From: Alistair Buxton <a.j.buxton@gmail.com> There seems to be an off by one error in the dibusb-mb.c which causes the "Artec T1 with AN2235" box to be detected as a totally different box - but it only happens if the Artec is one with the correct USB IDs. A patch is attached to the second post. However, even with this patch, the box still won't tune. It will tune using a 2.6.12 kernel though. Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-09-10[PATCH] Nebula DigiTV USB RC supportPatrick Boettcher
From: Allan Third <allan.third@cs.man.ac.uk> Attached is a patch against latest HG which adds remote control support to the DigiTV driver. It works for me; Signed-off-by: Allan Third <allan.third@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-09-09export symbol saa7134_tvaudio_setmute from saa7134 for saa7134-alsaRicardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> saa7134-alsa now unmutes/mutes the line when opening/closing the capture device, and needs this symbol Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2006-09-07Add module-init-tools version comment.Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> I've just determined that module-init-tools >=3.2 is needed for dvb_attach to work. This adds a comment to Kconfig about it. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-09-07Add tua6100 config wrapperAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> I had forgotten to add the wrapper round the tua6100_attach function if its disabled in Kconfig Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-09-06Improved i2c performance on software bitbang algoritmMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Software I2C were using a very conservative value of udelay=16, meaning about 20Kbps. According with Philips I2C datasheet, the i2c should answer well for times at the order of 4.7 us. So, using udelay=5 should work for all devices. After this patch, the speed should be close to 66,67 Kbps, with the current kernel software bitbang, with 30/60 duty cycle. Anyway, added a new parameter (i2c_udelay) that would allow using conservative values, if eventually a hardware doesn't support the datasheet values. Thanks to Jean Delvare <khali@linux-fr.org> for pointing this improvement. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-06merge: http://linuxtv.org/hg/~quincy/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-06Fixes an issue with V4L1 and make headers-installMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> V4L1 support should be disabled when no CONFIG_VIDEO_V4L1_COMPAT is defined, to allow checking for broken V4L2 ports. This is very important during the migration phase for V4L2 API. However, userspace apps should be capable of using both APIs, since they need to test at runtime, via VIDIOCGCAP ioctl, if V4L1 is supported. So, when __KERNEL__ is not defined, those ioctls and corresponding structs should be visible. This patch also removes the obsolete defines HAVE_V4L1 and HAVE_V4L2, that where causing some confusion, and were replaced by CONFIG_VIDEO_V4L1_COMPAT and CONFIG_VIDEO_V4L2. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-06Unmute/mute saa7134 when opening/closing the audio capture device.Ricardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> This patch should enable unmuting the audio device when opening it (and posterior muting when closing it), doing away with the need for unmute ioctls or v4lctl usage. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2006-09-05Port budget-av to use the new tua6100 driverAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Port budget-av to use the new tua6100 driver Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-09-05Add driver for TUA6100Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> This driver was originally in budget-av.c, however I have extracted it into a seperate file to permit reuse. I also reworked the code to make it maintainable. I then examined the KNC1 windows drivers and rewrote the code in order to configure the PLL as they do. This solves a lot of reported tuning problems. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-09-03Fix broken pvrusb2 buildMike Isely
From: Mike Isely <isely@pobox.com> Fix broken build when 24XXX support is not selected. This is required due to the requirement of removing 24XXX ifdef's from the driver source. Signed-off-by: Mike Isely <isely@pobox.com>
2006-09-03merge: http://linuxtv.org/hg/~quincy/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-03Adds Compro PS39U USB ID to Vicam driverMauro Carvalho Chehab
From: Bas Bloemsaat <bas.bloemsaat@gmail.com> Trivial patch to make Compro PS39U WebCam work with linux by using the vicam driver. The camera is just a vicam with another USB ID, so I added that ID to the driver, and it works now. Signed-off-by: Bas Bloemsaat <bas.bloemsaat@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-03Fix a typo: VRES, instead o HRESMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-02Improve resolution limit enforcements in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> The pvrusb2 driver resolution limits are now programmed the following way, based on empirical measurements of the hardware: Vertical max: 480 for NTSC, 576 otherwise Vertical min: 75 for 24xxx, 17 otherwise Horizontal max: 720 Horizontal min: 720 for 24xxx, 19 otherwise Signed-off-by: Mike Isely <isely@pobox.com>
2006-09-02Fix saa7115 miscalculation that breaks NTSCMike Isely
From: Mike Isely <isely@pobox.com> This repairs a problem introduced by a commit earlier today from Mauro. Hans Verkuil gets the credit for solving this. I'm committing it now because (a) nobody else has and (b) I'm stuck without it. Thanks-to: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mike Isely <isely@pobox.com>
2006-09-03Fix DVB Front-End Signal Strength InconsistencyAndrew de Quincey
From: "Bradley Kite" <bradley.kite@gmail.com> The cx22702 returns an 8 bit unshifted value for signal strength; this is inconsistent with most other frontends Signed-off-by: Bradley Derek Kite <bradley.kite@gmail.com> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-09-02Remove CONFIG_VIDEO_PVRUSB2_24XXX from pvrusb2 driverMike Isely
From: Mike Isely <isely@pobox.com> Support for 24xxx devices was previously explicitly bracketed with CONFIG_VIDEO_PVRUSB2_24XXX inside the code because we didn't trust the stability of these changes. We trust it now; so there's no reason to leave this out of the driver anymore. Signed-off-by: Mike Isely <isely@pobox.com>
2006-09-02Remove some dead data elements from pvrusb2 driverMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-09-02Partially reverting last patchMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Last patch did included two experimental stuff there, on cx88 and on pvrusb2. Reverting... Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-02Fixes some troubles on saa7115Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Scaling were not working fine; Some reserved registers were wrong; On some situations, saa7115 were not properly being initializated. Removed some duplicated code. Thanks-to: Hans Verkuil <hverkuil@xs4all.nl> for co-working on this patch. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-01Code were preventing saa7111 and saa7118 to workMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-01Fix VIDIOC_S_FMT min/max check in pvrusb2Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-09-01Fix: There were some missing breaks at register check routineMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Without the breaks, saa7115 were not initializing PLL2. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-01For contributers, it seems to be better to describe what changedMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-01saa7115 seems to need initializing some reserved registersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Also fixed a scaling trouble Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-31Added GNU License to the treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Although mentioned on several files at the tree, the GNU License file, as used by default at the drivers, were missing at the tree. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-30Fix scaling calculusMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks-to: Hans Verkuil <hverkuil@xs4all.nl> for testing it on ivtv. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-30merge: http://linuxtv.org/hg/~tap/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-30Fix: standard need to be setted, before adjusting audioMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-30Last patch wrongly applied. Reverting it...Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-30Fix encoder normMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Encoder API is still V4L1. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-30Fix a typo.Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-30Cleanup: removed hardcoded tablesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> saa7115 module is capable of calculating the proper FIR tables. However, there were 4 hardcoded tables for the standard resolution. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-29Renamed several common structs/functions to saa711x instead of saa7115Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-29Add support for saa7111 and partial support for saa7118Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-29Renames registers to be easier to work with theyMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> On SAA711x datasheets, registers are referenced by its numbers. So, it is better to keep the number at register name. This way, it is easier to seek that register at datasheet. Also, the alias helps to identify what the meaning for each register. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-28Added register aliases for saa711x registers, instead of using reg numbersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-28Make saa7115 to report the complete chipset nameMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-27Sync'ing dvb-usb-remote with changes in USB input subsystemTrent Piepho
From: Unai Uribarri <unaiur@gmail.com> This patch fixes the physical address and takes into account recent changes in the USB input subsystem. Signed-off-by: Unai Uribarri <unaiur@gmail.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-08-28Better temporal filter handling.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Adjust temporal filter if necessary. The problem with the temporal filter is that it works well with full resolution capturing, but not when the capture window is scaled (the filter introduces a ghosting effect). So if the capture window changed, and there is no updated filter value, then the filter is set depending on whether the new window is full resolution or not. For full resolution a setting of 8 really improves the video quality, especially if the original video quality is suboptimal. Also report VBI Format in VIDIOC_LOG_STATUS, it was missing. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-08-26Add u32 argument to VIDIOC_INT_RESET.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The extra argument makes it possible to reset subsystems of a chip if that is supported. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-08-24tda9887: add configuration setting for L standard PLL gatingTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Add a tuner config parameter for TDA9887, default_pll_gating_18, that changes the L standard PLL gating value from 36% to 0% (datasheet says 0%, tda9887 code says 18%). Turn this on for Microtune 4049FM5, as recomended by tuner datasheet. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-08-24isl6421: Release callback installed incorrectlyTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The release callback was installed in ops.release, it should have been ops.release_sec. This prevented to front-end release from getting called. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-08-23merge: http://linuxtv.org/hg/~pb/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-23Fix a warning caused by a typo (comma instead of dot-comma)Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-23Fix an error when loading bttv driver on PV M4900.Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Previously, this were reported: Ooops: IR config error [card=139] Thanks-to: Hermann Pitton <hermann-pitton@arcor.de> for the solution. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-23Fixes Helper module dependencies against V4L APIsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 17:08:17 +0000