Version 1.0.0pre5vdr-1.0.0pre5

- Fixed restoring CICAM setup values for a fourth DVB card (thanks to Klaus Wolf).
- Completed internationalization of OSD texts (thanks to Hannu Savolainen,
  Arnold Niessen, Paulo Lopes, Jean-Claude Repetto, Alberto Carraro, Matjaz
  Thaler and Truls Slevigen).
- Improved file I/O in case of EINTR, which may occur e.g. with heavy system
  load (thanks to Werner Fink).
- Now writing the title of a recording into the 'summary.vdr' file.
- Workaround for displaying still frames with the unpatched LinuxDVB driver
  (if anybody ever finds out why the unpatched driver doesn't display VDR's
  still frames, please let me know).
- When executing a command from the "Commands" menu, the title of that command
  is now immediately shown in the status line (followed by "...") to give the
  user some feedback that the command is being executed, which is especially
  important if this takes some time.
- Fixed scrolling the "Channels" menu in case the cursor ends up on a group
  delimiter (thanks to Bernd Zierath for helping to debug this one).
- Added manual pages vdr(1) and vdr(5) (which made the FORMATS file obsolete).
- New command command line option '-V' to display the VDR version.
- Adjusting column width for channel numbers in case there are more than 999
  channels.
- Checking the return value of '...FileRady...' calls in dvbapi.c for better
  performance under heavy system load.
- New 'make' target 'install', which copies the manual pages and executables
  to their appropriate system locations and creates the /video directory if
  it doesn't exist yet.
- Automatic hotkey assignment is now suppressed if the first entry in
  commands.conf starts with a digit in the range '1'...'9', followed by a blank.
- Fixed a bug in switching back the replay mode display in time shift mode
  (thanks to Achim Lange for reporting this one).
- Fixed a bug in the 'First day' timer parameter for timers that record over
  midnight.
- Added units to Setup parameters.
- Changed time entry in the 'Jump' command during replay, so that it is filled
  up from right to left.
- Now using statfs() to determine the amount of free disk space, which avoids
  the use of an external 'df' command (thanks to Ruben Nunez Francisco).
- Fixed skipping the next hit of a repeating timer (thanks to Rainer Zocholl
  for reporting this one).
- Fixed a bug when a timer records over midnight of a day that had a change in
  Daylight Saving Time.
- Added Polish language texts (thanks to Michael Rakowski).
- Fixed a bug in parsing group separators in channels.conf (thanks to Henning
  Holtschneider for reporting this one).
- Changed the default 'Ok' key when using the PC keyboard from '5' (in the
  numeric block) to 'Enter', because the '5' key didn't work on keyboards with
  the F-keys on top.
- Fixed a bug in the EPG bugfix mechanism if the extended description is shorter
  than 3 characters (thanks to Andreas Schultz).

1 files changed, 164 insertions, 0 deletions

diff --git a/vdr.1 b/vdr.1
new file mode 100644
index 0000000..1fd39df
--- /dev/null
+++ b/vdr.1
@@ -0,0 +1,164 @@
+'\" t
+.\" ** The above line should force tbl to be a preprocessor **
+.\" Man page for vdr
+.\"
+.\" Copyright (C) 2002 Klaus Schmidinger
+.\"
+.\" You may distribute under the terms of the GNU General Public
+.\" License as specified in the file COPYING that comes with the
+.\" vdr distribution.
+.\"
+.\" $Id: vdr.1 1.2 2002/03/29 10:10:04 kls Exp $
+.\"
+.TH vdr 1 "29 Mar 2002" "1.0.0" "Video Disk Recorder"
+.SH NAME
+vdr - the Video Disk Recorder
+.SH SYNOPSIS
+.B vdr
+[options]
+.SH DESCRIPTION
+.B vdr
+implements a complete digital Set-Top-Box and Video Recorder.
+It can work with signals received from satellites (DVB-S) as
+well as cable (DVB-C) and terrestrial (DVB-T) signals.
+
+At least one DVB card is required to run \fBvdr\fR, but in order
+to watch one broadcast while recording another, or to start watching
+a recorded programme before the live broadcast has ended (\fBtime shifting\fR),
+two DVB cards are necessary. By default \fBvdr\fR can support up to four
+DVB cards. The primary DVB card (the one your tv set is connected to) has
+to be a "full featured" card, which means it must contain an MPEG decoder
+and provide audio and video signal outputs.
+
+\fBvdr\fR uses the On Screen Display of the DVB card to display its menus.
+It can be controlled by the PC keyboard, a home built "Remote Control Unit"
+(RCU) or the "Linux Infrared Remote Control" (LIRC).
+
+Remote access is possible via the "Simple Video Disk Recorder Protocol" (SVDRP),
+which can be accessed on port 2001, for instance by \fBtelnet\fR.
+.SH OPTIONS
+.TP
+.BI -a\  cmd ,\ --audio= cmd
+Send Dolby Digital audio to stdin of command \fIcmd\fR.
+.TP
+.BI -c\  dir ,\ --config= dir
+Read config files from directory \fIdir\fR
+(default is to read them from the video directory).
+.TP
+.B -d, --daemon
+Run in daemon mode.
+.TP
+.BI -D\  num ,\ --device= num
+Use only the given DVB device (\fInum\fR = 0, 1, 2...).
+There may be several \fB-D\fR options (by default all DVB devices will be used).
+.TP
+.BI -E\  file ,\ --epgfile= file
+Write the EPG data into the given \fIfile\fR
+(default is \fI/video/epg.data\fR).
+Use \fB-E-\fR to disable this.
+If \fIfile\fR is a directory, the file \fIepg.data\fR
+will be created in that directory.
+.TP
+.B -h, --help
+Print a help message and exit.
+.TP
+.BI -l\  level ,\ --log= level
+Set logging to \fIlevel\fR.
+\fB0\fR\ =\ no logging, \fB1\fR\ =\ errors only,
+\fB2\fR\ =\ errors and info, \fB3\fR\ =\ errors, info and debug.
+The default logging level is \fB3\fR.
+.TP
+.B -m, --mute
+Mute audio of the primary DVB device at startup.
+.TP
+.BI -p\  port ,\ --port= port
+Use \fIport\fR for SVDRP. A value of \fB0\fR turns off SVDRP.
+The default SVDRP port is \fB2001\fR.
+You need to edit the file \fIsvdrphosts.conf\fR in order to enable
+access to the SVDRP port.
+.TP
+.BI -r\  cmd ,\ --record= cmd
+Call \fIcmd\fR before and after a recording.
+.TP
+.BI -s\  cmd ,\ --shutdown= cmd
+Call \fIcmd\fR to shutdown the computer.
+.TP
+.BI -t\  tty ,\ --terminal= tty
+Set the controlling terminal.
+.TP
+.BI -v\  dir ,\ --video= dir
+Use \fIdir\fR as video directory.
+The default is \fI/video\fR.
+.TP
+.B -V, --version
+Print version information and exit.
+.TP
+.BI -w\  sec ,\ --watchdog= sec
+Activate the watchdog timer with a timeout of \fIsec\fR seconds.
+A value of \fB0\fR (default) disables the watchdog.
+.SH EXIT STATUS
+.TP
+.B 0
+Successful program execution.
+.TP
+.B 1
+An error has been detected which requires the DVB driver and \fBvdr\fR
+to be re-loaded.
+.SH FILES
+.TP
+.I channels.conf
+Channel configuration.
+.TP
+.I ca.conf
+Conditional access configuration.
+.TP
+.I timers.conf
+Timer configuration.
+.TP
+.I setup.conf
+User definable setup.
+.TP
+.I commands.conf
+User definable commands (executed from the \fBCommands\fR menu).
+.TP
+.I svdrphosts.conf
+SVDRP host configuration, defining which hosts or networks are given
+access to the SVDRP port.
+.TP
+.I marks.vdr
+Contains the editing marks defined for a recording.
+.TP
+.I summary.vdr
+Contains a description of the recording.
+.TP
+.I resume.vdr
+Contains the index into the recording where the last replay session left off.
+.TP
+.I index.vdr
+Contains the file number, offset and type of each frame of the recording.
+.TP
+.I keys.conf
+Contains the key assignments for the remote control.
+.TP
+.I keys-pc.conf
+Contains the key assignments for the PC keyboard (used if the program
+was compiled with DEBUG_OSD=1).
+.TP
+.IR 001.vdr\  ...\  255.vdr
+The actual data files of a recording.
+.TP
+.I epg.data
+Contains all current EPG data. Can be used for external processing and will
+also be read at program startup to have the full EPG data available immediately.
+.SH SEE ALSO
+.BR vdr (5)
+.SH AUTHOR
+Written by Klaus Schmidinger, with contributions from many others.
+See the file \fICONTRIBUTORS\fR in the \fBvdr\fR source distribution.
+.SH REPORTING BUGS
+Report bugs to <vdr-bugs@cadsoft.de>.
+.SH COPYRIGHT
+Copyright \(co 2002 Klaus Schmidinger.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.