| Age | Commit message (Collapse) | Author |
|---|
|
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Changed the position of Sirius 4 to S4.8E in sources.conf (thanks to Alexander Gross).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Moved the declaration of cMenuCommands to menu.h, so that plugins can use it.
- Added a note to the MANUAL, saying that adding new transponders only works if the
"EPG scan" is active (suggested by Halim Sahim).
- Improved handling frames at the beginning and end of a recording in cDvbPlayer for
devices with large buffers (thanks to Reinhard Nissl).
- Implemented cDeviceHook to allow plugins more control over which device can
provide which transponder (thanks to Reinhard Nissl).
- Implemented cDevice::GetCurrentlyTunedTransponder() (thanks to Reinhard Nissl).
- Moved strictly necessary Makefile options into Make.global, which is included
by all plugins (thanks to Paul Menzel). The Makefiles of existing plugins should be
modified like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2009/10/18 14:00:07 2.1
+++ PLUGINS/src/hello/Makefile 2010/02/06 14:50:03 2.2
@@ -18,7 +18,7 @@
### The C++ compiler and options:
CXX ?= g++
-CXXFLAGS ?= -fPIC -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses
+CXXFLAGS ?= -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses
### The directory environment:
@@ -26,6 +26,10 @@
LIBDIR = ../../lib
TMPDIR = /tmp
+### Make sure that necessary options are included:
+
+include $(VDRDIR)/Make.global
+
### Allow user defined options to overwrite defaults:
-include $(VDRDIR)/Make.config
------------------------------------------------------------
- Added device definitions to the diseqc.conf file format, so that certain satellite
positions can be limited to a given list of devices.
This obsoletes the SOURCECAPS patch.
- Keeping subtitles visible when pausing replay (thanks to Rolf Ahrenberg).
- Fixed adding new transponders in case there is only a single channel in the
channel list (reported by Halim Sahin).
- The file name in the "Timers" menu now shows only the base name of the recording
without the folder path (if any). Otherwise with long folder paths the actual
recording name was not visible at all.
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Exported some libsi functions (thanks to Lucian Muresan).
- Improved scalability of the default skins.
- Fixed the German translation of "Folder name must not contain '%c'!" (thanks to
Frank Schmirler).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Plugins can now define new sources. In order to implement this, the following
changes were made:
+ The transponder parameter string is no longer interpreted by cChannel, but rather
stored as is and used only by the respective device. That way plugins can use a
channel's parameter string to store arbitrary data (see vdr.5).
+ The new class cSourceParam can be used by plugins to define new sources, and to
implement OSD items that will be used in the channel editor for editing the source
specific parameters of a channel (see dvbdevice.c for an example of how this is
done for the default DVB devices).
+ Purely numerical values are no longer accepted in the 'source' parameter of a
channel.
This obsoletes the PLUGINPARAM patch.
- Updated the Lithuanian OSD texts (thanks to Valdemaras Pipiras).
- cSafeFile::Close() now flushes the file (suggested by Stephan Austermühle).
- The option "Setup/DVB/Use Dolby Digital" now only controls whether Dolby Digital
tracks appear in the "Audio" menu. Dolby Digital is always recorded.
This obsoletes the DOLBYINREC patch.
|
|
- Changed the EVCONTENTMASK_* macros to enums and changed "mask" to "group".
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- The "Edit timer" menu can now set the folder for the recording from a list of
folders stored in "folders.conf".
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- If svdrphosts.conf contains only the address of the local host, the SVDRP port
is opened only for the local host (thanks to Manuel Reimer).
- Renamed 'runvdr' to 'runvdr.template' and no longer copying it to the BINDIR
in 'make install' (thanks to Martin Dauskardt).
- Added plain text error messages to log entries from cOsd::SetAreas() (suggested
by Rolf Ahrenberg).
- cPalette::ClosestColor() now treats fully transparent colors as "equal"; improved
cDvbSpuBitmap::getMinBpp() (thanks to Matthieu Castet and Johann Friedrichs).
- The new setup option "Miscellaneous/Channels wrap" controls whether the current
channel wraps around the beginning or end of the channel list when zapping (thanks
to Matti Lehtimäki).
- Fixed determining the frame duration on channels where the PTS deltas jitter by
+/-1 around 1800.
- The PCR pid in generated PMTs is now set to the channel's PCR pid again.
- Fixed determining the frame duration on channels where the PTS deltas jitter by
+/-1 around 3600.
- The PCR pid is now recorded for channels where this is different from the video
PID. To facilitate this, the interfaces of cTransfer, cTransferControl, cRecorder
and cReceiver have been modified, so that the PIDs are no longer given in separate
parameters, but rather the whole channel is handed down for processing. The old
constructor of cReceiver is still available, but it is recommended to plugin authors
that they switch to the new interface as soon as possible.
When replaying such a recording, the PCR packets are sent to PlayTsVideo()
- The files "commands.conf" and "reccmd.conf" can now contain nested lists of
commands. See vdr.5 for information about the new file format.
|
|
- Fixed resetting the file size when regenerating the index file.
- The new function cDevice::PatPmtParser() can be used in derived devices to access
the PAT/PMT of the currently replayed material.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- The PCR pid in generated PMTs is now set to 0x1FFF ("no PCR pid") in
cPatPmtGenerator::GeneratePmt(), because VDR doesn't record the PCR pid.
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- The 'sky' plugin is no longer part of the VDR source.
- Improved SPU handling on devices with limited OSD capabilities (thanks to
Matthieu Castet).
- Several code modifications to avoid compiler warnings (thanks to Winfried Köhler).
- Added stream type 11172 AUDIO to cPatPmtParser::ParsePmt() (thanks to Johann
Friedrichs).
- Removed debug output of '-' from cTransfer::Receive().
- Added defines for large files to the 'newplugin' script (reported by Udo Richter).
- Removed the workaround for short channel names of "Kabel Deutschland", because
apparently they now have their data according to the DVB standard (thanks to
Johann Friedrichs).
- Some fixes to dvbspu.[hc] (thanks to Johann Friedrichs).
- Fixed a busy loop when moving editing marks (thanks to Johann Friedrichs).
- Updated sources.conf (thanks to Derek Kelly).
- Modified cCharSetConv so that it can be used to convert from "whatever VDR uses"
to a given code (thanks to Joachim Wilke).
- Channel names containing commas are now handled correctly in channels.conf.
If a channel's short name contains a comma, it is replaced with a '.'.
- cDevice now logs the device number when a new device is created.
- Fixed handling STREAMTYPE_11172_AUDIO in cPatPmtParser::ParsePmt().
- cParsePatPmt now has functions to retrieve the audio, dolby and subtitle pids.
- cPatFilter::Process() now only stores CA descriptors for video and audio pids
(thanks to Francesco Saverio Schiavarelli for reporting a problem with channels
that have some encrypted components that VDR doesn't use).
- cDevice::AddPid() now stores the stream type of the given pid (thanks to Andreas
Regel).
- Added cFont::FontName() and cFont::Size() (thanks to Andreas Regel).
- cPatPmtParser now also stores the audio stream types.
- The support for full featured DVB cards of the TT/FuSi design has been moved
into the new plugin 'dvbsddevice'. On systems that use such a card as their
primary device, this plugin now needs to be loaded when running VDR in order
to view live or recorded video. If the plugin is not loaded, the card will
be treated like a budget DVB card, and there will be no OSD or viewing
capability.
- Fixed handling the "CA PMT" generation (revised a change not mentioned in version
1.7.9's changes, which caused a malfunction with Conax and Viaccess CAMs).
- Fixed stopping subtitle display when switching the primary device (thanks to
Anssi Hannula).
IMPORTANT NOTE TO PLUGIN AUTHORS: a plugin that implements a derived cDevice
class that can replay video must now call the MakePrimaryDevice() function of
its base class.
- Fixed compiler warnings "format not a string literal and no format arguments"
in some syslog calls (thanks to Rolf Ahrenberg).
- The new command line options --edit and --genindex can be used to edit a
recording or generate its index without actually starting the entire VDR
(based on a patch from Helmut Auer).
- Improved the description of the transponder parameters in vdr.5 (thanks to
Winfried Köhler).
- Avoiding setting the video stream type to 2 if the vpid is 0 (problem reported
by Arthur Konovalov).
- Implemented handling the "Content Descriptor" (based on a patch from Rolf
Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the textual
representation of the content descriptors as "genre". The epg.data file stores
the genre using the tag character 'G'.
- Implemented handling the "Parental Rating Descriptor" (based on a patch from Rolf
Ahrenberg). The 'classic', 'sttng' and 'curses' skins display the parental
rating (if given) in their event displays. The epg.data file stores
the parental rating using the tag character 'R'.
IMPORTANT NOTE: if VDR doesn't display a parental rating, this does not
necessarily mean that the given programme is suitable for all audiences!
- Rearranged cEvent members to minimize memory waste.
- After a CLRE command, no further EPG processing is now done for 10 seconds,
so that data sent with subsequent PUTE commands doesn't interfere with data
from the broadcasters (suggested by Helmut Auer).
- Added support for DVB cards with multiple fontends. Note that this only
works for DVB cards where each frontend can be used independently of all
the others on the same adapter.
- Fixed plugin arguments corruption with glibc 2.11 on x86_64 (thanks to
Anssi Hannula).
|
|
- Adapted the tuning code to the new DVBFE_SET_DELSYS API (thanks to Reinhard Nissl).
VDR now uses the driver from http://jusst.de/hg/multiproto_plus.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Removed obsolete $(NCURSESLIB) from the Makefile.
- Implemented handling the standard component descriptor for AC3 (stream=4), as it
will soon be used by the German ARD channels (thanks to Michael Pennewiß for
advance information about this change). The previously used "Premiere pseudo
standard" (stream=2, type=5) still works, but has apparently been wrongfully used
by broadcasters from the beginning.
- Added missing description of the 'S' channel parameter to vdr.5 (reported by
Reinhard Nissl).
- The SVDRP signon message now indicates the character encoding in use, as in
"220 video SVDRP VideoDiskRecorder 1.7.1; Fri May 2 16:17:10 2008; ISO-8859-1".
This may be useful for instance for external tools that provide EPG data, so that
they can correctly encode the strings.
- No longer calling FcFini() to avoid problems with older (broken) versions of
fontconfig (suggested by Edgar Toernig).
- Removed the compile time option VFAT to allow users of precompiled binary
distributions to have full control over whether or not to use the --vfat option
at runtime (suggested by Michael Nork).
- First step towards switching to TS (Transport Stream) as recording format:
+ The new function cDevice::PlayTs() is used to play TS packets.
+ The new functions cDevice::PlayTsVideo() and cDevice::PlayTsAudio()
are used to play video and audio TS packets, respectively.
+ The new function cAudio::PlayTs() is used to play audio TS packets.
+ The new class cPatPmtGenerator is used to generate a PAT/PMT pair that precedes
the TS data in Transfer Mode.
+ The new class cPatPmtParser is used by cDevice to parse the PAT/PMT data in a
TS in order to find out which streams it contains.
+ The new class cTsToPes is used to convert TS packets to a PES packet.
+ cTransfer no longer uses cRemux, and doesn't run a separate thread any more.
It just generates a PAT/PMT and sends all received TS packets to the primary
device's PlayTs().
+ Live subtitle display no longer uses a ring buffer and separate thread.
+ cPesAssembler has been removed. Old VDR recordings only contain complete PES
packets.
+ Since a TS needs to have a PAT/PMT, which requires the video stream type to
be explicitly given, the format of the VPID field in the channels.conf file
and the SVDRP commands NEWC/MODC/LSTC has been extended. The video stream type
now follows the VPID and optional PPID, separated by an '=' sign.
- Updated the sources.conf file (thanks to Oleg Roitburd).
- Fixed a possible integer overflow in GetAbsTime() (thanks to Alexander Rieger).
- Fixed a problem with calling isyslog() from within the SignalHandler() (thanks
to Udo Richter).
- Replaced the Finnish language code "smi" with "suo" (thanks to Rolf Ahrenberg).
- Fixed wrong value for TableIdBAT in libsi/si.h (thanks to Winfried Köhler).
- Errors in config files no longer keep VDR from starting.
- Removed unneeded include files <linux/dvb/dmx.h> und <time.h> from remux.h
(reported by Tobias Grimm).
|
|
- Re-implemented handling of DVB-S2, which first appeared in version 1.5.14, but was
revoked in version 1.5.15 in favor of making a stable version 1.6.0. VDR now
requires the "multiproto" DVB driver, e.g. from http://jusst.de/hg/multiproto.
Note that the channels.conf file now supports additional parameters, so you may
want to make sure you have a backup of this file in case you need to go back to
the previous version of VDR!
- Fixed displaying transponder data when it is modified (thanks to Reinhard Nissl).
- Fixed handling the counter in detection of pre 1.3.19 PS data (thanks to Reinhard
Nissl).
- Improved logging system time changes to avoid problems on slow systems under
heavy load (suggested by Helmut Auer).
- Now setting the thread name, so that it can be seen in 'top -H' (thanks to Rolf
Ahrenberg).
- Fixed initializing the timer's flags in the cTimer copy constructor (thanks to
Andreas Mair).
- Fixed setting the OSD level in the 'osddemo' example (thanks to Wolfgang Rohdewald).
- Increased the time between checking the CAM status to 500ms to avoid problems
with some CAMs (reported by Arthur Konovalov).
|
|
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Added option -i to the pictures plugin's pic2mpg to ignore unknown file types.
- Revoked the switch to the "multiproto" driver in order to make a new stable
version before making this big switch and forcing all users to install a
driver that is not yet in the kernel source. The removed code will reappear
in version 1.7.0.
Note that you may need to switch back to an older version of your channels.conf
file if you have already used version 1.5.14, because it introduced new parameters.
- Added the new command line option --userdump to enable core dumps in case VDR
is run as root with option -u (thanks to Hans-Werner Hilse).
- Speeded up anti-aliased font rendering by caching the blend indexes (based on
a suggestion by Martin Wache).
- Fixed setting the OSD area in the pictures plugin.
- Ignoring "repeat" and "release" keys in the time search entry mode during replay,
to avoid inadvertently leaving it in case a key is pressed too long (suggested
by Andreas Brugger).
- Improved sending all frames to devices that can handle them in fast forward
trick speeds, including subtitles (thanks to Timo Eskola).
- The section handler is now stopped before the device is destroyed, to avoid
accessing file handles after they have become invalid (thanks to Reinhard
Nissl for reporting an invalid access when ending VDR, and to Deti Fliegl for
a patch that was used to implement StopSectionHandler()).
- Fixed setting the date in the channel display of the classic and sttng skins,
to avoid unnecessary OSD access (thanks to Marco Schlüßler).
- The free disk space is now also displayed in the title of the "Recordings"
menu (suggested by Walter Koch).
- Changed the message "Upcoming VPS recording!" to "Upcoming recording!" because
it applies to non-VPS recordings as well.
- Fixed a loss of a timer's 'recording' flag after modifying it via MODT.
- Fixed detecting directories in cFileNameList::Load().
- Running the thread that removes deleted recordings at a low priority to (maybe)
avoid stuttering replay in case the thread is run during replay.
- Limiting the length of the recording name in timers in case VDR is run with
--vfat, in order to avoid names that are too long for Windows (suggested by Rolf
Ahrenberg).
- Using cString::sprintf() instead of asprintf() (thanks to Wolfgang Rohdewald
for pointing out a possible problem if the return value is not checked).
Plugin authors may want to consider doing the same. For convenience there is now
an additional version of cString::sprintf() that accepts a va_list parameter.
- When deleting the recording that is currently replayed, the replay is now
stopped immediately (thanks to Mikko Matilainen for reporting a possible crash
if the Info key is pressed after deleting the currently replayed recording).
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- When determining the amount of free disk space, any deleted (but not yet removed)
recordings on different file systems (that are mounted under the video directory)
are no longer taken into account.
- When running out of disk space during a recording, only such deleted or old
recordings are removed, that actually are on the video directory file system(s).
This prevents VDR from accidentally deleting recordings on other file systems,
which would not add any free space to the video directory.
- Implemented the cStatus, cDevice and cPlayer functions for setting subtitle tracks
in plugins (thanks to Petri Hintukainen).
- Added cStatus::TimerChange() to inform plugins about changes to the list of timers
(based on a patch from Benedikt Elser).
- Added new cStatus functions to the 'status' plugin.
- Added missing #include <limits.h> to epg.c and menuitems.h (thanks to Ville Skyttä).
- The new function cSkin::SetScrollbar() can be implemented by skins to display
a scrollbar in every list menu. The 'classic' and 'sttng' skins have been
changed accordingly, as well as the 'skincurses' plugin.
- Introduced 'operator const void * ()' in cString to catch cases where operator*()
should be used.
- Fixed calculating the scrollbar sizes in the skins.
|
|
- Fixed some spelling errors in 'newplugin' (thanks to Ville Skyttä).
- Fixed a busy loop in fast forward if the next video data file is missing
(thanks to Reinhard Nissl).
- Fixed handling frequencies in NitFilter::Process() (thanks to Anssi Hannula).
- Fixed a race condition with signal handlers at program exit (thanks to Udo
Richter).
- Non-primary devices in Transfer mode are now also used for recording (thanks
to Anssi Hannula).
- Fixed handling ChannelUp/Down keys if there is currently a replay running
(thanks to Marco Schlüßler).
- The new SVDRP command REMO can be used to turn VDR's remote control off and
on in case other programs need to be controlled (based on patches from Krzysztof
Parma and Helmut Auer).
- Increased the maximum number of CA system ids to cope with the AlphaCrypt
CAM's version 3.11 firmware.
- Fixed getting the code setting from the locale (thanks to Matthias Schwarzott).
- Implemented support for Freetype fonts (based on a patch from Alexander Riedel).
The font names and sizes can be adjusted in the "Setup/OSD" menu.
Note that VDR now requires freetype fonts to be installed in
/usr/share/fonts/truetype.
- If the OSD device in use has at least 8bpp bitmap depth and this is also
used by the current skin, Freetype fonts are displayed "anti-aliased".
The new setup parameter "OSD/Anti-alias" can be used to turn this off.
- The new function cOsd::SetAntiAliasGranularity() can be used to help the OSD
in managing the available color palette entries when doing anti-aliasing.
Skins that use 8bpp bitmaps can call this function with the maximum number
of colors used, and the maximum number of color combinations. The OSD will
then evenly split the available palette entries between the various colors
combinations, so that fonts can be "anti-aliased". By default a total of
10 colors and 10 combinations is assumed.
- The pixel fonts have been completely removed from the VDR source.
- VDR is now "UTF-8 aware". It handles strings according to the character
encoding used on the user's system. All internationalization strings and
incoming SI data are converted to the system encoding.
- Plugins that handle strings need to be aware that on systems with UTF-8
encoding a "character symbol" may consist of more than a single byte in
memory. The functions and macros named Utf8...() can be used to handle
strings without needing to care about the underlying character encoding
(see tools.h for details).
- Even though the weekdays of repeating timers are presented to the user as UTF-8
characters in the OSD, the timers.conf file and the SVDRP timer commands still
use single byte characters ("MTWTFSS") to make sure this information is handled
correctly between systems with different character encodings.
- Added a missing i18n string for "CAM" in the Turkish OSD texts.
- Improved editing strings that are too long to fit into the editable area.
- Changes to the OSD settings in the "Setup/OSD" menu now immediately take effect
when the "Ok" key is pressed.
|
|
- Fixed deleting EPG events that have a running status of "pausing" or higher.
- Fixed handling NITs with more than one delivery system descriptor tag for the
same transponder.
|
|
- The function cThread::Cancel() now only sets 'running' to false and does not
actually kill the thread if the special value -1 is given (suggested by Udo Richter).
- Changed the I18nNormalizeLanguageCode() check to also allow blanks (and all other
printable characters) in the language codes (thanks to Boguslaw Juza for reporting
that there are stations that use blanks in these codes). Blanks are replaced with
underlines, so that all parts of VDR that rely on language codes to be one word
(without blanks) work as expected.
- Now clearing an event's Title, ShortText and Description if there is no
ShortEventDescriptor or ExtendedEventDescriptor, respectively (thanks to Boguslaw
Juza for reporting that events without an ExtendedEventDescriptor may get
duplicate information in their ShortText through the EPG bugfixes in case they
are received again).
- Fixed handling video directory updates in case an other process has touched the
.update file after the last NeedsUpdate() check (thanks to Petri Hintukainen).
- Fixed handling language codes and descriptions of recorded audio tracks on channels
with multiple tracks where not all of them appear in the event data (reported by
Boguslaw Juza).
|
|
- Fixed assigning schedules to channels in case there is no initial EPG information
(thanks to Frank Schmirler).
- Increased the APIVERSION to allow plugins that relied on the cStatus::MsgSetVolume()
bug to react properly (suggested by Stefan Huelswitt).
- Fixed cDevice::ToggleMute() (thanks to Christoph Haubrich).
- Fixed deleting the last character of a string menu item in insert mode (thanks
to Udo Richter).
- The /video/.update file is now touched _after_ an editing process is finished
in order to avoid excessive disk access (thanks to Artur Skawina).
- Fixed handling the running status of EPG events before the currently running one,
in case they are added after the current event (cont'd from version 1.4.1-2).
- Modified the shutdown mechanism, so that the shutdown script is never given a
time in the past (reported by Helmut Auer). If a timer is currently recording,
or a recording would start within the next 30 minutes (default for the "Min.
event timeout" setup parameter), and the user insists in shutting down now, the
reboot time given to the shutdown script will correspond to a time that is
"Min. event timeout" minutes (default is 30) in the future.
- Avoiding shutdown message "Recording in ... minutes, shut down anyway?" with
a negative number of minutes (reported by Udo Richter).
- Fixed getting the next active timer when shutting down (thanks to Udo Richter).
- Modified the cSVDRP::Close() function to avoid code duplication.
|
|
- Fixed the Makefile of the 'servicedemo' plugin, so that it defines the
PLUGIN macro, which allows the Make.config file to react properly when
compiling the plugin (reported by Bernd Melcher).
Note to all plugin developers: a plugin's Makefile *must* define the PLUGIN
macro, even if it doesn't use it itself!
- Added a comment regarding the PLUGIN macro to the 'newplugin' script.
- Added '--vfat' to the vdr.1 man page (reported by Udo Richter).
- Removed a double fdopen() in cPipe::Open() (reported by Stefan Huelswitt).
- Fixed handling the running status of EPG events before the currently running one,
in case they are added after the current event.
- cEIT::cEIT() now calls pSchedule->SetPresentSeen() even if OnlyRunningStatus is
true.
- Newlines in title and short text of an EPG event are now changed into blanks only
after all other fixes, because a short text might become a description.
- Fixed handling network masks in the svdrphosts.conf file (thanks to Patrick
Maier).
- Fixed handling relative volume settings in the call to cStatus::MsgSetVolume()
(reported by Norbert Wentz).
- Added a missing initialization of 'mutex' in cCiMenu::cCiMenu() and removed
some superfluous semicolons in ci.c (thanks to Marco Schlüßler).
- Fixed handling client side termination of SVDRP connections (thanks to Frank
Schmirler).
- cDevice::GetDevice() now prefers any device that's already receiving and doesn't
require detatching receivers (suggested by Anssi Hannula).
- Fixed handling numeric keys in the channel display after switching channel groups
(thanks to Andreas Regel).
- Menu items derived from cMenuEditIntItem now loop though their values if they
have a dedicated minimum or maximum limit (suggested by Andy Grobb). Looping is
only done for normal keypresses, not for repeated ones. This allows the user to
scroll the value all the way to the limit by keeping the key pressed.
|
|
- Removed leftover LSMOD=... line from 'runvdr'.
- Modified the Makefile to copy additional libraries a plugin might provide (suggested
by Wayne Keer). See PLUGINS.html for details.
- Fixed handling Transfer Mode when replaying Dolby Digital audio and the option
'-a' was given (based on a patch from Werner Fink). To avoid having to increment
the API version, several #if checks have been introduced around this. These will
be removed once the API version actually needs to be incremented.
- Fixed deleting the 'skinDescriptions' in cMenuSetupOSD::~cMenuSetupOSD() (thanks
to Tobias Grimm).
- Fixed calculating the start time of repeated timers with "first day" (thanks to
Udo Richter).
- Now setting a timer's cached start time to 0 after a call to Skip() (thanks to
Udo Richter).
- Fixed handling the running status of EPG events in case the "Schedule" menu is
currently open (i.e. a write lock on the schedules data can't be achieved).
- Fixed handling VPS timers in case the EPG event hasn't been 'seen' in a while.
- Fixed calculating the cache size in cUnbufferedFile::Read() (thanks to Artur Skawina).
- Removed -fPIC from VDR's and libsi's Makefile (suggested by Prakash Punnoor).
- Modifed the device selection to better handle timer conflicts (reported by
Christian Wieninger).
- Avoiding a compiler warning in libsi's TypeLoop::operator[].
- Now processing the "frequency list descriptor" (based on a patch from Anssi Hannula).
- Improved the repeat function for LIRC remote controls (thanks to Joerg Riechardt).
- Fixed moving channels, which sometimes stopped the current replay session
(reported by Mirko Dölle).
- Fixed deleting channels in case the current channel's number changes (reported
by Mirko Dölle).
|
|
- Updated 'S110W' in 'sources.conf'.
- Adjusted the 'runvdr' script so that the user can fill in the functions to
detect, load and unload the necessary driver modules (thanks to M. Kiesel for
reporting that it still used DVBDIR).
- Added 'eval' to the $VDRCMD call in 'runvdr' to avoid problems with quoting
(suggested by Udo Richter).
- Fixed missing ',' in the Italian and Polish OSD texts (thanks to Marko Mäkelä).
- Updated the Czech OSD texts (thanks to Vladimír Bárta).
- Fixed handling the "Power" key in case a timer is about to start recording
(thanks to Udo Richter).
- Fixed the character 'r' in fontosd and fontsml for iso8859-2 (thanks to Vladimír
Bárta).
- When checking whether a VPS timer has entered the "VPS margin", the event's start
time is now used instead of the timer's start time, because otherwise events that
start way off of their VPS time wouldn't be recorded correctly.
- If VPS timers are active, their events are now being kept up to date if there
are any free devices available.
- Fixed the character #207 in fontosd for iso8859-2 (thanks to Vladimír Bárta).
- Fixed handling unknown codes when learning LIRC remote control codes (reported
by Helmut Auer).
- Since some channels (especially the Austrian ORF) randomly change the ids of their
EPG events, VDR now gives the start time precedence when searching for existing
events.
- Fixed automatically updating the CAM menu in case the whole operation (for
instance a firmware update) takes longer than the menu timeout.
|
|
- Updated the GPL copies (thanks to Ville Skyttä).
- Fixed several spelling errors (thanks to Ville Skyttä).
- Updated the Polish OSD texts (thanks to Jaroslaw Swierczynski).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Updated the French OSD texts (thanks to Pierre Briec).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Romanian OSD texts (thanks to Lucian Muresan).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- Updated the Slovenian OSD texts (thanks to Matjaz Thaler).
- Fixed wrong credits for the patch that was used to implement cPlugin::Active().
- Simplified the 'grep|awk|sed' command to retrieve the VDR/APIVERSION to a single
'sed' call.
- Updated the Swedish OSD texts (thanks to Tomas Prybil).
- Modified the German OSD texts to be "less technical" (thanks to Andreas Brachold).
- Extended the version number reported with the '-V' option to also show the
current APIVERSION (suggested by Thomas Günther).
- Fixed handling empty titles in cEvent::FixEpgBugs() (reported by Rolf Ahrenberg).
- Fixed some missing '-' in the German OSD texts (thanks to Walter Koch).
- Added an error message about plugins that don't honor APIVERSION in their Makefile
(based on a suggestion by Udo Richter).
- Fixed a format string in recording.c to avoid a compiler warning on 64bit systems
(thanks to Christian Wieninger for reporting, and Werner Schweer for pointing out
that the 'z' modifier should be used here).
- Ignoring k_Repeat when deciding whether the same key has been pressed in string
input fields (based on a patch from Marko Mäkelä).
|
|
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed a crash when setting the time transponder in the Setup menu, caused by the
new 'noneString' in cMenuEditChanItem (reported by Thomas Günther).
- Added NULL checks to some strdup() calls in menuitems.c (suggested by Darren
Salt).
- Removed the unnecessary 'value' member from cMenuEditItem.
- Fixed the initial setting of the time transponder setup parameter (reported
by Thomas Günther).
- Fixed unnecessary Set() calls in cMenuEditIntItem::ProcessKey().
- Allowing a tolerance for symbol rate values that are off by one (thanks to
Richard Lithvall).
- Added VBITeletextDescriptorTag, TeletextDescriptorTag, LocalTimeOffsetDescriptorTag
and PremiereContentTransmissionDescriptor to 'libsi' (thanks to Marco Schlüßler).
- Using geteuid() to check whether VDR is running as user 'root' (suggested by
Tobias Grimm).
- Added a missing "Key$" in skincurses.c (reported by Darren Salt).
- Reintroduced the log message "deleting plugin: ..." when shutting down VDR (upon
request by Ville Skyttä, as in the initial patch from Christoph Haubrich).
- Fixed the vdr.1 man page (a single DVB card can record and do live tv).
- The preferred audio language is now automatically selected when starting replay.
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- The new function cPlugin::Active() can be used by a plugin to indicate that it
is still busy and the system should not shut down or restart (based on a patch
from Sascha Volkenandt). See PLUGINS.html for details.
- Fixed setting the 'Delta' parameter when calling the shutdown script with
no active timer (reported by Helge Lenz).
- In order to make sure that plugins are compiled with the same DVB driver header
files as VDR itself, the definition of DVBDIR has been removed from the VDR
Makefile. If you are using a driver version that has its header files at a location
other than /usr/include/linux/dvb, you can define DVBDIR in the Make.config
file (see also INSTALL). Note that if you already have a Make.config file of your
own, you should add the lines
ifdef DVBDIR
INCLUDES += -I$(DVBDIR)/include
endif
to its end, as in the new Make.config.template.
Any reference to DVBDIR should be removed from all plugins' Makefiles, like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2005/11/11 13:20:14 1.10
+++ PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11
@@ -20,7 +20,6 @@
### The directory environment:
-DVBDIR = ../../../../DVB
VDRDIR = ../../..
LIBDIR = ../../lib
TMPDIR = /tmp
@@ -40,7 +39,7 @@
### Includes and Defines (add further entries here):
-INCLUDES += -I$(VDRDIR)/include -I$(DVBDIR)/include
+INCLUDES += -I$(VDRDIR)/include
DEFINES += -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"$(PLUGIN)"'
------------------------------------------------------------
Thanks to Marco Schlüßler for pointing out this problem.
- Implemented kNext and kPrev keys (based on a patch from Peter Juszack).
See MANUAL for details.
- Implemented kChanPrev (from a patch from Darren Salt).
- The "Update channels" parameter in the "Setup/DVB" menu has been extended to
allow updating only the PIDs (see MANUAL for details). When updating to this
version of VDR, please verify that the setting is as you want it to be, because
the values have been shifted.
- The new APIVERSION (see config.h) now allows existing compiled plugins to be
used with newer versions of VDR, as long as there have been no changes to the
VDR header files since the last APIVERSION. Existing plugins' Makefiles should
have all references to VDRVERSION changed to APIVERSION, like this:
------------------------------------------------------------
--- PLUGINS/src/hello/Makefile 2006/04/15 11:58:46 1.11
+++ PLUGINS/src/hello/Makefile 2006/04/16 09:03:50 1.12
@@ -28,9 +28,9 @@
-include $(VDRDIR)/Make.config
-### The version number of VDR (taken from VDR's "config.h"):
+### The version number of VDR's plugin API (taken from VDR's "config.h"):
-VDRVERSION = $(shell grep 'define VDRVERSION ' $(VDRDIR)/config.h | awk '{ print $$3 }' | sed -e 's/"//g')
+APIVERSION = $(shell sed -ne '/define APIVERSION/s/^.*"\(.*\)".*$$/\1/p' $(VDRDIR)/config.h)
### The name of the distribution archive:
@@ -67,7 +67,7 @@
libvdr-$(PLUGIN).so: $(OBJS)
$(CXX) $(CXXFLAGS) -shared $(OBJS) -o $@
- @cp $@ $(LIBDIR)/$@.$(VDRVERSION)
+ @cp $@ $(LIBDIR)/$@.$(APIVERSION)
dist: clean
@-rm -rf $(TMPDIR)/$(ARCHIVE)
------------------------------------------------------------
- If a timer is newly created from within the "Schedule" menu, and its event is
already running or has its start time within the next two minutes, it now goes
directly into the "Edit timer" menu in order to allow the user to make further
changes to timer parameters before the actual recording starts (inspired by
Christian Wieninger's "epgsearch" plugin).
- Added format check to syslog_with_tid().
- Updated the INSTALL file's section about non-VDR files in the video directory
(since version 1.3.38 disk access is done in a separate thread, so the watchdog
timer won't hit).
- Changed the behaviour of the "Use small font" setup option to *always* use the small
font if set to '2' - even if it would have been a fixed font (suggested by Ronny
Kornexl).
- No longer using characters 0x01 and 0x02 for mapping single quote and slash in
recording names (thanks to Patrick Fischer for reporting that this was a problem
with XML). The single quote is not mapped at all, and the slash is interchanged
with the tilde. Existing recordings will be handled like before, so there is
no need to actually rename them.
- The cRemote::CallPlugin() function now has a boolean return value that tells
the caller whether initiating the plugin call was successful (suggested by
Reinhard Nissl). If it returns false, another plugin call is currently pending
and the caller should try again later. This also means that the SVDRP command
PLUG can now return an error code is the call fails.
- The new function cPlugin::MainThreadHook() can be used by plugins to perform
actions in the context of the main program thread. Use this function with great
care and only of you absolutely have to! See also PLUGINS.html.
|
|
- Fixed updating the "Info" button in the "Timers" menu.
- Reduced the number of events to actually check when setting events to timers.
- cMenuEditIntItem now checks the given value and forces it to be between the
given min and max limits.
- The status changes of EPG events are now logged for all channels that have timers.
- Removed the log message "deleting plugin: ..." when shutting down VDR (thanks to
Christoph Haubrich for reporting that this is irritating when calling "vdr --help").
- Fixed cReadLine::Read() for lines that end with the infamous "\r\n" (thanks to
Rolf Ahrenberg).
- Fixed cDvbDevice::SetAudioBypass() in case setTransferModeForDolbyDigital is false
(thanks to Werner Fink).
- Updated 'sources.conf' (thanks to Oleg Roitburd).
- Fixed the shutdown timeout (thanks to Alexander Wenzel).
- Only calling RemoveEmptyVideoDirectories() once in case a recording has been
deleted (reported by Hardy Flor).
- Fixed deleting recordings that have been removed externally when running out of
disk space (reported by Jan Lenz).
- Fixed handling repeating VPS timers (they stopped recording too early).
- Timer log messages now show "VPS" if this is a VPS timer.
- Fixed getting the present EPG event in case none is currently 'running' (it
then returns the one that just ended).
- Fixed calling a plugin's main menu function while a message is being displayed
(reported by Helmut Auer).
- Updated the Russian OSD texts (thanks to Oleg Roitburd).
- Made cMenuRecordings::GetRecording() 'protected' (suggested by Marius Heidenstecker).
- Speeded up cRemux::ScanVideoPacket() (thanks to Reinhard Nissl).
- Enhanced logging EPG event data.
- Fixed format string handling (thanks to Darren Salt).
- The new function cDevice::ForceTransferMode() can be used to force the primary
device into transfer mode (thanks to Reinhard Nissl).
- The 'version' of EPG events is now ignored when reading EPG data from 'epg.data'
or via SVDRP/PUTE to avoid problems with double EPG events.
- The 'running status' of EPG events is now only set to SI::RunningStatusNotRunning
for events before the present event.
- Fixed some #include sequences.
- Single shot VPS timers are now only considered 'expired' if their associated
EPG event has been explicitly set to SI::RunningStatusNotRunning.
- The check for timers to be deleted is now done only every 30 seconds.
|
|
- Fixed setting the audio language codes in 'Transfer-Mode' (reported by Rolf
Ahrenberg). The actual problem was the call to the Transferring() function in
cDevice::AttachPlayer() before assigning the player.
- Fixed removing the '-' when entering a channel number where there is no other
one that fits the input (thanks to Joachim Wilke).
- Fixed the 'libsi' function CharArray::checkSize(), which made a previous workaround
in libsi/descriptor.c obsolete (thanks to Marcel Wiesweg).
- The "Ok" key in the "Jump" mode of the replay progress display now confirms the
jump instead of closing the display (thanks to Christoph Haubrich).
- The 'summary' field of a timer definition has been renamed to 'aux', and is now
only used for external applications to store auxiliary information with a timer,
which has no meaning whatsoever to VDR itself.
The contents of the 'aux' field of a timer is copied into the recording's
'info.vdr' file, using the tag character '@'.
- The description of a recording is now taken exclusively from its related EPG
data. If an application wants to use a different description it needs to set
it with SVDRP/PUTE and use table ID 0x00, so that it won't be overwritten (as
a side effect, however, this also disables VPS for such an event).
- There is no more "Summary" menu when pressing "Ok" in the "Timers" menu.
The "Ok" key now always opens the "Edit timer" menu.
- The upper 16 bit of a timer's "flags" are no longer treated specially when a timer
is modified in the "Edit timer" menu. If an external application needs to know if
a timer was modified, it has to keep a copy of the timer's data and compare that
to the actual data.
- The new function cRecordingInfo::ChannelID() can be used to retrieve the ID of
the channel a recording was made from.
- The 'info.vdr' file of a recording now also contains the 'E' and 'V' records of
the EPG event used when creating it.
- The option "Setup/OSD/Sort timers" has been removed. Timers are always sorted
by their start time and priority.
- The "Blue" key in the "Timers" menu now displays the EPG info of the event the
selected timer will record (if available). The "On/Off" function has been shifted
to the "Red" button. Editing a timer is done by pressing "Ok".
- When determining which event a timer is going to record, all available events
in the future are now taken into account (no more limit to 4 hours in the
future). This has been done so that the event info is available in the "Timers"
menu when pressing the "Blue" button. In order to avoid unnecessary work, each
timer now has its own timestamp to control whether its schedule has changed
since the last time its event has been set.
- Fixed setting events to timers in case a non-VPS event has expired.
- There is now a log message "timer ... set to event ..." when defining a timer
from the EPG menu.
- Lines tagged with '#' in the 'info.vdr' file of a recording are now silently
ignored when reading that file (suggested by Peter Bieringer). Such lines can
be used by external tools to store arbitrary information.
- The 'event id' in EPG data has been extended to 32 bit, so that external tools
can generate ids that don't collide with those from the DVB data stream
(suggested by Matthias Schniedermeyer).
- The DrawBitmap() function now has a new parameter 'Overlay' that allows a bitmap
to be drawn with a transparent background (thanks to Alexander Hans).
- Fixed cSchedule::GetFollowingEvent() in case there is currently no present event
running (thanks to Pekka Mauno).
|
|
- Removed an unnecessary toFile->SetReadAhead() from cutter.c (thanks to Artur
Skawina).
- The "Back" key now restores the original string when pressed while editing a
string item (suggested by Markus Hahn).
- Now stopping scanning the video directory if there are too many levels of
symbolic links, which might indicate a recursive link loop (based on a patch
from Helmut Auer).
- Improved OSD area handling in cDvbSpuDecoder (thanks to Marco Schlüßler).
- Now logging the description (if present) in case a thread is canceled (suggested
by Marco Schlüßler).
- cMenuText now uses the given font (thanks to Rolf Ahrenberg).
- The ST:TNG skin now uses the fixed font if requested when displaying texts.
- Fixed some typos in the CONTRIBUTORS file (thanks to Frank Krömmelbein).
- Changed offset and size handling in 'libsi' from 'unsigned' to 'signed', so that
overflows can be better detected (thanks to Marcel Wiesweg).
- Checking data size in CaDescriptor::Parse() and LinkageDescriptor::Parse() of
'libsi' to avoid crashes with invalid data (thanks to Marcel Wiesweg).
- Made CharArray::DataOwnData::assign() in 'libsi' more robust against invalid
data (suggested by Oliver Endriss). Also changed CharArray::DataOwnData::Delete()
so that it sets 'size' and 'data' to 0.
- Now resetting the channel number if the number entered through the numeric keys
exceeds the maximum channel number (thanks to Rolf Ahrenberg).
- The language code in the 'X' component records of EPG data can now consist of
two codes, separated by '+'.
- If a recording starts and there is no EPG data available for the recorded channel,
the 'X' audio component records for the 'info.vdr' file are now generated from the
channel's PID data.
- Externally provided EPG data (with table ID 0x00) now gets its component
descriptors set from the broadcast data, so that language codes and descriptions
are available (suggested by Andreas Brugger).
- When setting the audio track descriptions, the language codes are now also set
in case this is a replay session (based on a patch from Rolf Ahrenberg).
- If a recording starts and the channel's audio PID data has more language code
information than the EPG's component data, the code from the channel is taken.
- Fixed handling DPID when deciding whether to switch to 'Transfer Mode' (thanks
to Marco Schlüßler).
- Fixed replaying recordings of radio channels with many audio tracks (thanks to
Reinhard Nissl).
- Added a comment to tChannelID::nid, explaining that is is actually the "original"
network id.
|
|
- Removed leftover 'needsBufferReserve' variable from cTransfer (thanks to Marco
Schlüßler).
- Fixed setting "No title" for broken event data (reported by Ronny Kornexl).
- Fixed channel up/down switching on single card systems (reported by Stefan
Huelswitt).
- Fixed handling "pending" timers that blocked others that actually could record
(reported by Thomas Koch).
- Speeded up cVideoRepacker (thanks to Reinhard Nissl).
- Added an 'Id' parameter to cDevice::PlayAudio() to allow plugins to easier
process the audio data (thanks to Marco Schlüßler).
- Added Czech language texts (thanks to Vladimír Bárta).
Plugin authors may want to add the new entries to their I18N texts and contact
the translators to have their texts translated. Note that there are now 21
different OSD languages, so please make sure you have 21 versions for each of
your texts.
- Updated the Polish OSD texts (thanks to Jaroslaw Swierczynski).
- Fixed auto advance in string entry fields when pressing Up/Down in insert mode
(reported by Udo Richter).
- Fixed handling the "Setup/OSD/Menu button closes" option when set to 'yes' in
case a replay is active (thanks to Udo Richter).
- Improved cUnbufferedFile; USE_FADVISE is now defined in tools.c by default, so
if you don't want to use "fadvise" you need to comment out that line (thanks to
Artur Skawina).
- Fixed a missing ',' in the Swedish OSD texts (thanks to Arthur Konovalov).
- cDevice::Transferring() can now be used to determine whether the (primary)
device is currently playing in Transfer Mode (based on a suggestion by
Reinhard Nissl).
- The 'runvdr' script no longer uses the $VDRUSR environment variable to set
the user id under which 'vdr' shall run. Just add the '-u username' option
when you call 'runvdr'.
- Fixed multiple entries of the same subdirectory in the "Recordings" menu
(reported by Christian Jacobsen).
- Enabled generating a core dump if VDR is run with a different user id (thanks
to Ville Skyttä).
- Fixed handling the "Blue" key in the "Schedule" menu for the current channel
(thanks to Rolf Ahrenberg).
- Renamed the Makefile target 'plugins-clean' to 'clean-plugins' (suggested by
Sebastian Frei).
- Made all font and image data 'const' (thanks to Darren Salt).
- Fixed scrolling with Up/Down in case there are non-selectable items at the
beginning or end of the menu (reported by Helmut Auer).
- Added cSkin::GetTextAreaWidth() and cSkin::GetTextAreaFont(), so that a plugin
that wants to do special text formatting can do so (thanks to Alexander Rieger).
|
|
- EPG events from epg.data or SVDRP's PUTE command now have their Title set to
"No Title" if none was set.
- Fixed checking toFile in cCuttingThread::Action() (found in a larger patch from
Artur Skawina).
- Fixed a crash when pressing '0' in the "Schedule" menu on a channel that doesn't
have any EPG data (reported ny Alexander Hans).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Fixed a missing ',' in the Greek OSD texts (thanks to Arthur Konovalov).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Fixed handling the tfRecording flag when reading timers (bug reported by Andreas
Mair).
- Now checking whether the channel exists before setting the PMT filter in
cPatFilter::Process() (thanks to Thomas Bergwinkl).
- Now trying to reestablish the connection to the LIRC daemon in case it breaks
(thanks to Ville Skyttä).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed channel switching with the Down (Up) key in case the current channel is
already the first (last) in the list (reported by Frank Krömmelbein).
- Removed the "buffer reserve" in Transfer Mode - it's no longer necessary with
recent driver/firmware versions.
- The epg.data file is now written when VDR exits (suggested by Daniel Karsubka).
- Fixed cTimers::GetNextActiveTimer() so that it won't return an expired timer
(reported by Rolf Ahrenberg).
- Changed DVBS_TUNE_TIMEOUT and DVBC_TUNE_TIMEOUT to 9000ms to avoid problems with
channels that have low symbol rates (reported by Suur Karu).
- Fixed displaying the current audio track in the channel display.
- When reading epg.data (or data from PUTE), the version number of events with
table IDs smaller than 0x50 is now ignored because otherwise the current
running status would not be set after a restart of VDR.
- Implemented a timeout for remote controls that don't deliver "repeat" keypresses
very fast (based on a suggestion by Luca Olivetti; problem with the new handling
of k_Repeat keypresses in channel switching reported by Udo Richter).
- When looking for the present or following EPG event, the running status is now
always taken into account.
- Now initializing the channels' schedule pointers when reading the epg.data file,
so that the first WhatsOn menu will come up faster.
- If a shutdown is requested, but the shutdown script doesn't actually halt the
system, it is now tried again after 5 minutes (suggested by Helmut Auer).
- Separated the 'install' target into several individual targets; renamed the
'plugins-install' target to 'install-plugins' (thanks to Helmut Auer).
|
|
- Fixed a second place where a message should be given when an instant recording
is started (reported by Jesus Bravo Alvarez).
- Modified logging so that even on NPTL systems each line in the log file shows
the individual thread's pid (based on a suggestion from Francois-Xavier Kowalski).
- Fixed a problem with @plugin in keymacros.conf in case the named plugin is not
loaded (reported by Franz Gangkofer).
- Fixed a crash after executing the SVDRP command CLRE, caused by dangling 'schedule'
pointers from cChannel objects (reported by Malte Schröder).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Improved NULL checking in strreplace().
- Fixed a crash in the Schedule menu with events that have no title (reported by
Rolf Ahrenberg). cEvent::FixEpgBugs() now assigns a "No title" string to events
that have no title.
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Recordings are now only started if there is at least 300MB free disk space
(suggested by Markus Hahn).
- When entering text via the numeric keys, the cursor now automatically advances
(based on a patch from Rolf Ahrenberg).
- Updated the Polish OSD texts and the fontosd-iso8859-2.c file (thanks to Jaroslaw
Swierczynski).
- Disabled the "buffer reserve" in Transfer Mode. Last chance to complain if you
really need it - it will be completely removed in the next version. If you are
experiencing problems with a/v running out of sync, try the latest driver and
firmware (if you are using a full featured DVB card).
- Switching channels with the Up/Down or Channel+/Channel- keys now works a lot
faster when the repeat function kicks in, by not actually switching the
channel every time, but rather only displaying the channel info and doing
the final switch when the key is released.
- The channel display is now updated _before_ the channel is switched.
- Added a missing initialization of 'timeout' in the cDisplayChannel constructor.
- Fixed detecting if there can be any useful further input when entering channel
numbers (thanks to Thomas Bergwinkl).
- Updated the Spanish OSD texts (thanks to Jesus Bravo Alvarez).
- Fixed handling the '0' key for switching between the last two channels (thanks
to Thomas Bergwinkl).
|
|
- The SVDRP command LSTT now accepts the new option 'id' to have the channels
of the timers listed with their unique channel ids instead of their numbers
(suggested by Matthias Schniedermeyer).
- Added a missing #include <linux/unistd.h> to thread.c (thanks to Ville Skyttä).
- Fixed the "plugins-clean" and "plugins-install" targets in the Makefile (thanks
to Andreas Brachold).
- Fixed handling "more than 3 byte" key sequences in cKbdRemote::ReadKeySequence()
(thanks to Peter Bieringer). If you are using the PC keyboard as remote control
input you may need to make VDR newly learn the keys by removing the remote.conf
file.
- To avoid problems with access rights when VDR shall run as 'root' it now skips
all SetCaps() and SetUser() calls when it is started as 'root' and "-u root"
is given.
- Added missing i18n entry for the "Timer" button (thanks to Ville Skyttä)
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Making the "Menu" key behave consistently has not been well received by several
users, so the new option "Setup/OSD/Menu button closes" can be used to get the
old behavior back (which also is the default value of this option).
- Dropped the default vdr user. The program now always runs under the user id
it was started from, unless the '-u' option is given and it was started from
the 'root' user. If you want to have a default vdr user, you can activate and
adjust the "VDR_USER = vdr" line in your Make.config file (from the original
patch by Ludwig Nussel).
- Key macros can now be defined for all non-modeless keys (suggested by Mirko Dölle).
- Adjusted the "KEY MACROS" section of vdr.5 to the new plugin calling mechanism
introduced in version 1.3.32.
- Removed the now obsolete "ca.conf" section from vdr.1 (thanks to Ville Skyttä).
- Added missing description of L and R circular polarization to 'diseqc.conf'.
- Added a note about "modprobe capability" to INSTALL (suggested by Patrick Cernko).
- Fixed canonicalizing the file name in the SVDRP command GRAB to allow full path
names (thanks to Stefan Huelswitt).
- Added a missing '-' to the example for viewing a grabbed image on a remote host
(reported by Philippe Gramoullé).
- Made the "What's on now/next?" menus a lot faster by storing a pointer to each
channel's schedule in the cChannel data.
- Made the log messages regarding lost lock of devices "info" instead of "error"
(suggested by Andreas Brachold).
- The SVDRP command GRAB allows file names without extension again (suggested by
Stefan Huelswitt).
- Pressing '0' in the "Schedule" menu now rotates through displaying "This event on
this channel", "This event on all channels" and "All events on all channels".
This can be used to find reruns of a given show, or the episodes of a series.
Note that if there are many channels in your channels.conf, displaying the
"All events on all channels" page may take a while.
- The status markers in the "Schedule" menu are now only updated if a submenu is
closed in which a timer has been modified, which speeds up closing submenus.
- Now only writing Dolby Digital tracks into the 'info.vdr' file of a recording
if Setup.UseDolbyDigital is true (suggested by André Weidemann).
- Added a leading '0' to the day in the DayDateTime() function (thanks to Rolf
Ahrenberg).
- No longer displaying color buttons in the recording info menu if it has been
invoked from a player (reported by Jürgen Schilling).
|
|
- Fixed handling second audio and Dolby Digital PIDs for encrypted channels
(was broken in version 1.3.37).
- Improved TS/PES conversion to better handle lost TS packets (thanks to
Reinhard Nissl).
- Limited the frequency of log messages from the cRepackers.
- Now using the gettid() syscall to get a thread's pid, so that we get a
useful value on NPTL systems (suggested by Johannes Stezenbach).
- Fixed the RCU remote control handling to avoid problems with NPTL (thanks
to Andreas Share for reporting a lockup with the RCU on NPTL systems).
- When displaying the amount of free disk space, the space consumed by
recordings that have been "deleted" but not yet actually "removed" is now
taken into account (suggested by Christian Vogt).
- Now avoiding unnecessary disk access when checking if there are deleted
recordings that need to be removed (reported by Carsten Koch).
- Fixed handling the DELETEDLIFETIME when removing deleted recordings. Now
a deleted recording is retained at least DELETEDLIFETIME seconds before
actually removing it.
The value of DELETEDLIFETIME has been changed to 300. So after (possibly
inadvertently) deleting a recording, there will be at least 5 minutes
in which it can be recovered (unless a new recording immediately requires
the disk space). The count starts again at 0 every time VDR is started.
- Fixed a possible crash when displaying the "Low disk space!" message from
a background thread (thanks to Christof Steininger).
- Fixed handling OSD areas that have invalid sizes (thanks to Marco Schlüßler).
- Added a mutex to AssertFreeDiskSpace() to make sure calls from foreground
and background threads won't interfere.
- The main menu now dynamically updates its contents in case an instant
recording or replay stops, etc.
- The version number of EPG events is now also stored in the epg.data file
(thanks to Kendy Kutzner).
- EPG events that are no longer in the currently broadcasted data stream are
now automatically deleted.
- Removed an invalid access to Event->schedule in cSchedule::DelEvent().
- Modified cSchedule::Cleanup() (events are always sorted by time).
- Schedules are now cleaned up once every hour (not only at 05:00).
- The "Schedule" and "What's on now/next?" menus are now updated if a timer
is set or modified.
- cTimer no longer has its own 'schedule' member, it rather uses that of the
event it has been set to.
- The "Red" button in the "Schedule", "What's on now/next?" and "Event" menus
now immediately creates a timer for the selected event and marks it with 'T'.
If the event is already marked with 'T', the "Red" button opens the "Edit
timer" menu for that timer.
- Removing deleted recordings is now done in a separate thread.
- Dropped the unused "stop recording on primary interface" stuff.
- Converting a grabbed image to JPEG is now done with the new function
RgbToJpeg() (see tools.h).
- The SVDRP command GRAB now determines the image type (JPEG or PNM) from the
extension (".jpg", ".jpeg" or ".pnm") of the given file name. The explicit
'jpeg' or 'pnm' parameter is still accepted for backward compatibility, but
has no meaning any more.
- The function cDevice::GrabImage() no longer writes the grabbed image to a
file, but rather returns a pointer to the image in memory. The wrapper
function cDevice::GrabImageFile() can be used to write the grabbed image
directly to a file. Plugins that used the old version of cDevice::GrabImage()
need to be adapted to the new interface.
- The new class cBase64Encoder (see tools.h) can be used to encode data in
base64 (thanks to Bob Withers for publishing his Base64 class).
- The SVDRP command GRAB now writes the image data to the SVDRP connection
(encoded in base64) if the given file name consists of only the file
extension (".jpg", ".jpeg" or ".pnm"), or if only "-" is given as file
name (based on a suggestion from Darren Salt).
A simple way of viewing a grabbed image on a remote host is:
svdrpsend.pl -d <hostname> 'grab -' | sed -n -e 's/^216-//p' -e '1ibegin-base64 644 -' -e '$a====' | uudecode | display -
- The new command line option '-g' must be given if the SVDRP command GRAB
shall be allowed to write image files to disk. The parameter to this option
must be the full path name of an existing directory, without any "..", double
'/' or symlinks. By default, or if "-g- is given, grabbing to files is
not allowed any more because of potential security risks.
- Modified the way the SVDRP command GRAB writes the grabbed image to a file
to avoid a security hole (CAN-2005-0071, reported by Javier Fernández-Sanguino
Peña):
+ The file handle is now opened in a way that it won't follow symbolic links
(suggested by Darren Salt).
+ The given file name is now canonicalized, so that it won't contain any
".." or symlinks (suggested by Darren Salt).
+ Grabbing to files is limited to the directory given in the the command
line option '-g'. By default grabbing to files is not allowed any more.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Changed all "illegal" to "invalid" in error messages (there's nothing "illegal"
in VDR ;-).
- When started as user 'root' VDR now switches to a lesser privileged user id,
keeping the capability to set the system time (based on a patch from Ludwig
Nussel). By default the user id 'vdr' is used, which can be changed through
the new command line option '-u'. Note that for security reasons VDR will no
longer run as user 'root' (unless you explicitly start it with '-u root',
but this is not recommended!). The 'runvdr' script has been changed to
use the '-u' option.
- Changed the API of the functions cStatus::Recording() and cStatus::Replaying(),
so that they can provide the full file name of the recording. Plugins that use
these (or the related cStatus::Msg...() functions) need to be adapted
(suggested by Andreas Brugger).
- The DVB devices now retune (and, if applicable, resend the DiSEqC data) if
the lock is lost (based on a patch from Reinhard Nissl).
- Fixed handling multi byte key sequences in cKbdRemote (based on a patch from
Jürgen Schneider).
- Removed unused variables in skinclassic.c and skinsttng.c (thanks to Marco
Schlüßler).
- Made the static cControl functions thread safe (thanks to Patrick Fischer).
- Fixed initializing pthread_mutexattr_t and pthread_rwlockattr_t to avoid
warnings with g++ 4.1.0 (thanks to Ville Skyttä).
- Fixed incrementing the 'state' variables in the repacker classes in remux.c
to avoid warnings with g++ 4.1.0 (reported by Ville Skyttä).
- The Makefile now reports a summary of failed plugins (thanks to Udo Richter).
- The cTimer constructor can now take an optional cChannel (suggested by
Patrick Fischer).
- Fixed setting the main thread id if VDR is running as a daemon.
- Fixed handling TS packets in cTS2PES (thanks to Reinhard Nissl).
- Added cTimer::SetPriority() to set a timer's priority (suggested by Kendy Kutzner).
- Added cMenuEditStrItem::InEditMode() (suggested by Christian Wieninger).
- Now using FE_READ_STATUS to read the current frontend status (suggested by
Holger Wächtler).
- The "Menu" key now behaves consistently. If there is anything on the OSD, it
is closed when the "Menu" key is pressed, and if there is nothing on the OSD,
the "Menu" key opens the main menu (suggested by Luca Olivetti).
- The new option "Setup/OSD/Timeout requested channel info" can be used to turn
off the automatic timeout of the channel display in case it was invoked by
a press of the "Ok" key (suggested by Thiemo Gehrke).
- A message is now given when an instant recording is started (suggested by
Helmut Auer). Actually the code was already there, just commented out - don't
remember why it wasn't active...
- Removed an obsolete "Summary" text from i18n.c and preceded all key definition
texts with "Key$" to avoid duplicates (reported by Lucian Muresan).
- Preceded all button texts with "Button$".
- Removed obsolete "Eject", "Language" and "scanning recordings..." texts.
- Added missing #include "thread.h" to dvbspu.c (reported by Gavin Hamill).
- Disabled the use of "fadvise" in cUnbufferedFile because there have been
several reports that it causes more problems than it solves (suggested by
Petri Hintukainen). If you want to use "fadvise", you can activate the line
//#define USE_FADVISE
in tools.c.
- Removed unused 'offset' member from cOsdItem.
- In the "Channels" menu the numeric keys now position the cursor to the channel
with the given number (see MANUAL, section "Remote Control Keys", note (3) for
details).
- The "Mark/Move" function in the "Channels" menu now also works in the non-numeric
sort modes.
- The default cOsdObject::Show() now automatically calls cOsdMenu::Display() if
this is a menu.
- The new "Info" key brings up information on the currently viewed programme
or recording. For a live programme this is the same as "Schedule/Ok", i.e. the
description of the current EPG event. For a recording this is the same as shown
by the "Info" button in the "Recordings" menu. Plugins that implement players
can overwrite their cControl::GetInfo() function to show their own info (see
PLUGINS.html for details). Pressing the "Info" key again while the info is
displayed will close the OSD. In order to assign this new key to an existing
remote control setup, the remote.conf file needs to be deleted and VDR has
to be restarted to go through the process of learning the remote control keys.
- Any cReceivers still attached to a cDevice when that device switches to a
different transponder are now automatically detached (suggested by Patrick
Fischer).
- The "flags" of a timer are now handled as an unsigned integer value. In order
to do this, the interface of cMenuEditBitItem also had to be changed.
- In string entry fields (like, e.g., the file name of a recording) the characters
can now be entered by pressing the numeric keys, the same way as on a
telephone keypad (based on the "Easy Input" patch from Marcel Schaeben).
- Fixed the "Day" field of the "Edit timer" menu when pressing '0' to switch
from "single shot" to "weekly", followed by the "Right" key (reported by
Andreas Böttger).
- The file 'ca.conf' is obsolete and has been removed.
- Revised all descriptions regarding CICAM.
- Adapted c(Dvb)Device::ProvidesCa() to the dynamic CA handling.
- Added a mutex to synchronize cDevice::PlayPesPacket() and SetCurrentAudioTrack()
(thanks to Reinhard Nissl).
- Added a SleepMs() in cRecorder::Action() to avoid a busy loop (thanks to Ingo
Schneider).
- Cleaned up some trailing white space.
|
|
- Added compiler options "-fPIC -g" to all plugins (thanks to Rolf Ahrenberg).
- Fixed initializing the day index when editing the weekday parameter of a
repeating timer (thanks to Marco Schlüßler).
- No longer removing superfluous hyphens in EPG data - would become too
language dependent to handle all kinds of exceptions.
- Modified switching to Dolby Digital audio in live mode, if the driver
and firmware can handle live DD without the need of a Transfer Mode (thanks
to Werner Fink). Live DD mode requires a full featured DVB card and a
LinuxDVB driver with firmware version 0x2622 or higher. Older versions will
use Transfer Mode just like before.
- Implemented handling of the "CA PMT Reply" for CAMs (thanks to Marco
Schlüßler for figuring out some obscure length bytes in the CA PMT Reply
data of AlphaCrypt CAMs).
- Some preparations for being able to record several encrypted channels from
the same transponder at the same time (or record and view different encrypted
channels), provided the CAM in use can handle this. This is work in progress
and isn't actively used, yet.
- Fixed SetProgress() in the 'skincurses' plugin in case Total is 0 (reported
by Stefan Huelswitt).
- Added a copy constructor to cString and fixed its assignment operator
(thanks to Holger Brunn).
- The new function Skins.QueueMessage() can be called from a background thread
to queue a message for display. See VDR/skins.h for details.
- The SVDRP command MESG uses the new message queueing facility, so MESG
commands may now be executed at any time, and the message will be displayed
(no more "pending message").
|
|
- Fixed a NULL pointer access with the cUnbufferedFile when a replay session runs
all the way until the end of the recording (thanks to Joachim Wilke).
- A menu is no longer automatically closed when a replay ends (reported by
Marko Mäkelä).
- Removed '\n' from several syslog() calls (reported by Sascha Volkenandt).
- Fixed missing '&' in the SetAreas() example in PLUGINS.html (reported by
Sascha Volkenandt).
- Fixed a memory leak in cString::operator=() (reported by Sascha Volkenandt).
- Updated the Dutch OSD texts (thanks to Maarten Wisse).
- cReadLine now dynamically allocates its buffer, so that it can handle lines
of any length.
- Changed cConfig::Load() to use cReadLine instead of a fixed buffer (thanks
to Andreas Mair for reporting a problem with extremely long summary fields
in timers).
- cSVDRP now dynamically allocates its command buffer in order to handle
commands of any length. The MAXPARSEBUFFER macro is now obsolete and has
been removed. If a plugin has used that macro, it should either define
a buffer size of its own, or use cReadLine when reading files.
- Fixed a race condition in the SPU decoder (thanks to Marco Schlüßler).
- The EPG scan no longer disturbs players that have also set live PIDs
(reported by Stefan Huelswitt).
- Fixed setting the help key display in the Recordings menu in case of several
layers of subdirectories.
- Removed EPG bugfix #0, because it removed actually important data.
|
|
- Updated 'sources.conf' (thanks to Philip Prindeville).
- Now using daemon() instead of fork() to run VDR in daemon mode (thanks to
Enrico Scholz).
- Fixed a possible endless loop in a menu with no selectable items if
Setup.MenuScrollWrap is true (thanks to Enrico Scholz).
- Making sure no item is displayed as "current" if Up, Down, Left or Right is
pressed in a menu with no selectable items.
- Added '__attribute__' to functions that use printf() like parameters (thanks
to Darren Salt).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed a leftover 'summary.vdr' in vdr.1 (reported by Christoph Hermanns).
- Added more error messages and line numbers when reading EPG data and info.vdr
(thanks to Peter Bieringer).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Added missing mutex locks to cCiMenu::Abort() and cCiEnquiry::Abort() (reported
by Marco Schlüßler).
- Fixed lock handling in CAM communication to avoid problems with multiple CAMs
per device or CAMs with more than one smart card.
- Updated the Greek OSD texts (thanks to Dimitrios Dimitrakos).
- Updated the French OSD texts (thanks to Nicolas Huillard).
- Fixed the cFilter example in PLUGINS.html (reported by Patrick Fischer).
- The new class cUnbufferedFile is used for the recording files to avoid
trashing the file system cache (based on a patch by Ralf Müller).
|
|
- Added some missing braces in remux.c (thanks to Wayne Keer for reporting this one).
- Removed unused MAINMENUENTRY from svdrpdemo.c (thanks to Udo Richter for reporting
this one).
- Fixed appending sequence end code in cDvbPlayer::Goto() (thanks to Reinhard Nissl).
- Fixed syncing in cRepacker (thanks to Reinhard Nissl).
- Now always using stream id 0xE0 for the video stream, to avoid problems with
post processing tools that choke on different ids (suggested by Reinhard Nissl).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Fixed cDvbPlayer::SkipFrames() to properly handle radio recordings (thanks to
Reinhard Nissl).
- Updated the Swedish OSD texts (thanks to Tomas Prybil).
- Updated the Slovenian OSD texts (thanks to Matjaz Thaler).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Made LIRC command parsing more robust (thanks to Ville Skyttä).
- Introduced a separate 'plugins-install' target in the Makefile (thanks to Daniel
Thompson).
- Re-introduced the code that waits for a tuner lock in VDR/device.c, since
apparently some users actually need it. It's not active by default, you'll have
to define the WAIT_FOR_TUNER_LOCK macro in that file if you need it (suggested
by Malcolm Caldwell).
- Adjusted the Makefile to the dvb-kernel driver on kernel 2.6 and up (thanks to
Lauri Tischler).
- Repeat keys are now ignored when waiting for a keypress to cancel an operation
(thanks to Marko Mäkelä).
- The main menu function of a plugin can now be activated through a key macro of
the form "@plugin" even if that plugin doesn't have a main menu entry (using
part of a patch by Hardy Flor, which originally implemented calling plugins from
SVDRP).
- The menu timeout handling is now done centrally in the main program loop.
- Added missing help for the 'help' keyword in the SVDRP command PLUG.
- The main menu function of a plugin can now be called programmatically through
the static function cRemote::CallPlugin().
- The SVDRP command PLUG now has a new option 'main' which can be used to initiate
a call to the main menu function of a plugin (using part of a patch by Hardy Flor).
- The new command line option '--vfat' can be used to make VDR encode special
characters in recording file names, even if it wasn't compiled with VFAT=1
(suggested by Peter Bieringer). The compile time option VFAT still exists and
creates a VDR that always behaves as if it were called with '--vfat'.
- Replaced the ':' delimiter between hour and minute in recording file names with
a '.' under Linux, too. Existing recordings with ':' as delimiter will still work.
- Implemented the SVDRP command MOVC (thanks to Andreas Brachold).
- Added support for multiple audio language codes in ISO639LanguageDescriptors to
'libsi' (thanks to Marcel Wiesweg).
- Changed the audio PID language codes to hold up to two 3 letter codes, separated
by '+', to store separate languages broadcast in two channel audio mode.
- If the preferred audio language is broadcast on a PID that has two different
languages in the two stereo channels, the audio channel is now properly set when
switching to such a channel (thanks to Mogens Elneff for his help in testing this).
- Fixed some typos in MANUAL (thanks to Ville Skyttä).
- Fixed the default value for "Setup/EPG bugfix level" (thanks to Ville Skyttä for
reporting this one).
- Fixed defining timers that only differ in the day of week (thanks to Patrick
Rother for reporting this one).
- Fixed converting summary.vdr files that would result in a very long 'short text'
(thanks to Carsten Koch).
- Implemented a hash for the channels to reduce the system load in the EIT scanning
thread (based on a patch by Georg Acher).
|
|
- Added a sleep in cDvbPlayer::Action() in case there is no data to send to the
device, which avoids a busy loop on very fast machines (thanks to Martin Wache).
- Modified the description of cDevice::Poll() to avoid misunderstandings.
- Updated Croatian language texts (thanks to Drazen Dupor).
- cDvbPlayer::Goto() now appends a Sequence End Code to get the image shown
immediately with softdevices (thanks to Reinhard Nissl).
- Reactivated cVideoRepacker in remux.c after some fixes (thanks to Reinhard Nissl).
- Removed the fix for handling VPS timers, so that they only record if the event
they are assigned to actually has the given VPS time. This has caused repeating
VPS timers to stop recording prematurely.
- Avoiding duplicate components in EPG events when reading epg.data or in the
PUTE SVDRP command (thanks to Olaf Titz for reporting this one).
- Added the command line options '--lirc', '--rcu' and '--no-kbd' to allow setting
the remote control at runtime (based on a patch by Darren Salt).
- Now checking whether timers or channels are currently being edited via the menu
before making changes through SVDRP (thanks to Andreas Brugger for reporting a
problem with this).
- Files and directories are now created with rights according to the shell's
umask settings (thanks to Andreas Brachold).
- Fixed the cChannel copy constructor (thanks to Marcel Wiesweg for pointing out
a problem with it).
- Fixed an out-of-bounds memory access with audio language ids (thanks to
Matthias Lenk for reporting, and Udo Richter for suggesting a fix).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added missing storing of the MenuScrollPage parameter (thanks to Frank Krömmelbein).
- Added cRemux::SetTimeouts() for better use of cRemux in a single thread (thanks
to Udo Richter for reporting a problem with this).
- Modified cEITScanner::Process() so that it uses the primary device if it is
replaying and is the only device that provides the given transponder, and that
a forced EPG scan works even if EPG scan timeout is set to 0 (thanks to
Bernhard Stegmaier for reporting a problem with this).
- Fixed cDvbSpuBitmap::putPixel() (thanks to Reinhard Nissl).
- Fixed setting system time to avoid time jumps in case of faulty data (thanks
to Andreas Böttger).
- Fixed a memory leak in the SVDRP command LSTE (thanks to Stefan Huelswitt).
|
|
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed handling 'summary.vdr' files with more than two empty lines (thanks to
Christian Jacobsen for reporting this one).
- Improved resetting CAM connections (thanks to Marco Schlüßler).
- Implemented cVideoRepacker in remux.c to make sure every PES packet contains
only data from one frame (thanks to Reinhard Nissl).
NOTE: currently this doesn't work with MPEG1, so if you use MPEG1 you may want
to change line 1158 in remux.c to
ts2pes[numTracks++] = new cTS2PES(VPid, resultBuffer, IPACKS);
as it was before.
- EPG events without a title now display "No title" instead of "(null)" (thanks
to Rolf Ahrenberg).
- A device can now detach all receivers for a given PID, as is necessary, e.g.,
for the bitstreamout plugin (thanks to Werner Fink).
- Added the year (two digits) to recording dates in LSTR, and thus also in menus
(suggested by Jan Ekholm).
- Fixed the call to Channels.Unlock() in cEITScanner::Process() (thanks to
Reinhard Nissl).
- Fixed handling timers with a day given as MTWTF--@6, i.e. a repeating timer with
first day not as full date, but just day of month (thanks to Henrik Niehaus for
reporting this one).
- Removed an unnecessary #include from osd.c (thanks to Wolfgang Rohdewald).
- Fixed dropping EPG events that have a zero start time or duration, in case it's
an NVOD event (thanks to Chris Warren).
- Fixed handling page up/down in menu lists in case there are several non selectable
items in a row (thanks to Udo Richter for reporting this one).
- Added cOsdMenu::SetCols() to allow adjusting the menu columns.
- Modified cEITScanner::Process() so that it works on systems with only budget cards
or a mix of DVB-S, DVB-C or DVB-T cards.
|
|
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Some cable providers don't mark short channel names according to the standard,
but rather go their own way and use "name>short name". VDR now splits at this
character for cable channels (thanks to Gerhard Steiner for reporting this one).
- Added a check for Setup.DiSEqC in cDvbDevice::ProvidesTransponder(), otherwise
the EPG scan didn't work on systems that don't use DiSEqC (thanks to Michael
Reinelt for reporting this one).
- Made the Makefile patch friendlier (thanks to Ludwig Nussel).
- Made cOsd::isOpen an integer counter to avoid problems with messages when a
cOsdObject uses the raw OSD (thanks to Andreas Regel for reporting this one).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- The file 'summary.vdr' has been replaced with 'info.vdr' and now contains the
information about a recording, in the same format as the events are stored in
'epg.data' (see man vdr(5) for details). Existing summary files can be converted
to the new format by running the Perl script 'summary2info.pl', as in
summary2info.pl /video
(the parameter given has to be the video directory). If there is no 'info.vdr'
file for a recording, an attempt is made to read a 'summary.vdr'.
- The "Summary" button in the "Recordings" menu has been renamed to "Info", and
the page it brings up now shows the recording's information, much like the EPG
event page. Therefore it now no longer uses the skin's SetText() function, but
rather the SetRecording() function. Skin plugins may need to adjust that function
accordingly (see skinsttng.c, for instance).
- The SVDRP command LSTR now lists the recording information in the same tagged
format as the LSTE command lists the EPG data.
- The audio track menu now contains track descriptions when replaying (provided
such descriptions were available in the EPG data when the recording was made,
and are stored in the info.vdr file).
- Avoiding extra blanks at the end of names of instant recordings.
- Removed converting byte order on big endian systems from cDvbOsd::Flush(),
which, according to Johannes Stezenbach and Paavo Hartikainen, is wrong.
- Added cPlayer::DeviceSetVideoDisplayFormat() (thanks to Marco Schlüßler).
- No longer saving the setup in case of a fatal error, to keep the volume level
from being set to a wrong value (thanks to Marco Schlüßler).
- Fixed a possible hangup when ending a replay session while cIndexFile::CatchUp()
is waiting (thanks to Marco Schlüßler).
- The SVDRP command DELR no longer deletes recordings that are currently being
written to by a timer (thanks to Sascha Volkenandt for pointing out this one).
- Pressing the "Play" key in live viewing mode now resumes a previous replay
session (thanks to Mirko Dölle).
- Now dropping EPG events that have a zero start time or duration (thanks to
Oliver Endriss).
- No longer stopping Transfer Mode or replay immediately when the Power button
is pressed (thanks to Rolf Ahrenberg).
- Moved the NPTL and UTF-8 checks after the version and help output (thanks to
Andreas Kool for pointing out that 'vdr --version' failed on an UTF-8 system).
- Made tChannelID::operator==() inline for better performance (thanks to Georg
Acher).
- Introduced cListBase::count for better performance (thanks to Georg Acher).
- cEvent no longer stores the channelID directly, but rather has a pointer to
the schedule it is in.
- Now using hash tables to speed up cSchedule::GetEvent() (partially based on
a patch from Georg Acher).
- Avoiding unnecessary calls to getLength() in libsi/si.c, and avoiding the
'& 0xff' in CRC32::crc32() of libsi/util.c (thanks to Georg Acher).
- Speeded up deleting duplicate channels.
- Fixed listing recordings with empty episode names in the LSTR command (thanks
to Stefan Huelswitt for pointing this out).
- Added cThread::SetPriority() and using it in cSectionHandler::Action() to
reduce the priority of the section handler threads (as suggested by Georg Acher).
|
|
- Now including the optional user defined Make.config from the 'libsi' Makefile
(thanks to Ville Skyttä).
- Updated the Danish OSD texts (thanks to Mogens Elneff).
- Fixed a memory leak in tComponent (thanks to Stefan Huelswitt and Daniel Thompson).
- Fixed a memory leak in cDvbPlayer (thanks to Stefan Huelswitt).
- Added missing text internationalization for "Starting EPG scan" (thanks to
Matthias Lötzke).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed handling transparent areas in cDvbSpuBitmap (thanks to Marco Schlüßler).
- Now also considering the "EPG linger time" when saving the EPG data to file or
listing it via LSTE (thanks to Roman Krenický).
- Fixed handling fragments of less than 4 byte in cPesAssembler (thanks to
Reinhard Nissl).
- Fixed a bug in libsi's SubtitlingDescriptor::getLength() (thanks to Marco
Schlüßler).
- When reading the channels.conf file, duplicate channels (i.e. ones that have
the same channel ID) are now automatically deleted and only the first one is
actually stored.
- Fixed handling lifetime when deciding whether to delete a recording (thanks to
Udo Richter).
- Fixed timeout handling in cRwLock::Lock() (thanks to Sascha Volkenandt for reporting
this one).
- Since there are several places in thread.c where a timeout value is calculated,
this has been put into a separate function.
- The timer status now has a new bit that is set when that timer is currently
recording (suggested by Matthias Schniedermeyer). See man vdr(5) for details.
- Removed scaling coordinates in letterbox mode from cDvbSpu - the DVD plugin, which
was the only one needing this, doesn't need it any more (thanks to Marco Schlüßler).
- No longer retuning or restarting a recording if only the language code of an
audio or Dolby PID changes.
- Now preferring budget cards when selecting a DVB device for recording.
- Recordings now avoid zero sized video data files (thanks to Wolfgang Fitz).
- Some rearrangements in cDvbPlayer::Action() to avoid lockups on NPTL systems
(thanks to Reinhard Nissl).
- Fixed a wrong inheritance in libsi's SubtitlingDescriptor::Subtitling (thanks to
Marco Schlüßler).
|
|
- The setup option "DVB/Video display format" is now only available if "Video format"
is set to "4:3" (suggested by Mikko Salo).
- Updated the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Dropped CA support for the old '-icam' firmware.
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Updated the Swedish OSD texts (thanks to Tomas Prybil).
- Fixed a few French OSD texts that were in the wrong place.
- Improved matching timers to EPG events, especially in case there are several events
with the same VPS time.
- Fixed cDolbyRepacker to allow recording ProSieben HD broadcasts (thanks to Reinhard
Nissl).
- Fixed cDvbDevice::SetVideoDisplayFormat() in case of 16:9 (thanks to Marco Schlüßler).
- The running status of a VPS event is now only taken seriously if that event has been
seen within the last 30 seconds - otherwise recording is done as if no VPS was
available.
- The day of a timer is now stored as a full date in ISO notation ("YYYY-MM-DD") in
'timers.conf' and for the result of the SVDRP command LSTT (based in parts on a
patch by Roman Krenický).
- Some fixes to avoid compiler warnings in gcc 4.0 (thanks to Ville Skyttä for reporting
these).
- Single shot timers are now reliably deleted when they have expired.
- Fixed setting the colored button help after deleting a recording in case the next
menu entry is a directory (thanks to Steffen Beyer).
- Improved falling back to normal recording if the VPS data hasn't been seen for more
than 30 seconds.
- Added a missing cMutexLock to cRemote::HasKeys() (thanks to Wolfgang Rohdewald).
- All log entries regarding timers now contain a short description of the timer.
|
|
- Removed some unneeded code and fixed access to unallocated memory in
cEvent::FixEpgBugs() (thanks to Wolfgang Rohdewald).
- Avoiding unnecessary calls to SetPid() in cDvbDevice::SetAudioTrackDevice()
(thanks to Marco Schlüßler).
- No longer calling EnsureAudioTrack() in cDevice::SetChannel() if a Transfer Mode is
started, to avoid setting the audio PID on the primary device (thanks to Marco
Schlüßler for pointing this out).
- Replaced the call to system("sync") in SpinUpDisk() with fdatasync(f) to avoid
problems on NPTL systems (thanks to Chris Warren for pointing this out).
- Increased POLLTIMEOUTS_BEFORE_DEVICECLEAR in transfer.c to 6 to avoid problems
with the larger buffer reserve (thanks to Marco Schlüßler).
- Fixed the call to SetVideoFormat() in cDvbDevice::cDvbDevice() (parameter is _bool_).
- Added support for setting the video display mode (thanks to Marco Schlüßler).
- The new setup option "DVB/Video display format" can be used to define which display
format to use for playing wide screen video on a 4:3 tv set.
- Changed MAXDPIDS to 16 (8xAC3 + 8xDTS) (thanks to Werner Fink for pointing this out).
- Completed Dutch language texts (thanks to Hans Dingemans).
- Added 'smi' to the Finnish language codes (thanks to Rolf Ahrenberg).
- Fixed ensuring there is a current audio track in case there is only one track
(thanks to Werner Fink for reporting this one).
- Improved automatic audio track selection.
- Keeping the track language codes and descriptions in Transfer Mode (thanks to
Luca Olivetti).
- Fixed handling repeated kAudio keys.
- Improved displaying the the current audio track in the ST:TNG channel display.
|
|
- Removed an unused variable from cTimer::GetWDayFromMDay() (thanks to Wayne Keer
for reporting this one).
- Some more changes to the 'childTid' handling in cThread (based on suggestions by
Stefan Huelswitt).
- Fixed the spelling of 'canceling' (thanks to Wayne Keer for reporting this one).
- Re-introduced a sleep to cDvbPlayer::Action() to avoid high CPU load in still
picture mode (thanks to Reinhard Nissl for reporting this one).
- Fixed a possible race condition in generating the DVB device names (thanks to
Rainer Zocholl for reporting this one).
- Changed the way PES packets are played to allow replay of AC3 sound over the
full featured DVB cards (partially based on a patch from Werner Fink).
+ The new function cDevice::PlayPes() is now called with the complete PES data
stream and calls PlayVideo() and PlayAudio() as necessary.
+ cDevice::PlayVideo() is now only called with actual video PES packets.
+ cDevice::PlayAudio() is now called with the actual audio PES packets, which
can be either "normal" audio or AC3 data. You need at least firmware version
0x261d to replay AC3 sound over a full featured DVB card. This function now
has an 'int' return value.
+ PlayAudio() of derived cDevice classes shall no longer call the base class
function. It shall just play the given data as audio.
+ cPlayer::PlayVideo() and cPlayer::PlayAudio() are now obsolete and have been
replaced with cPlayer::PlayPes().
+ All StripAudioPackets() functions are now obsolete. The functionality has been
moved into cDevice::PlayPes(), where only the video and audio packets that are
actually required will be processed.
+ All audio track handling is now done by cDevice; cTransfer and cDvbPlayer no
longer care about audio tracks. cPlayer, however, still has the virtual hooks
for audio track handling in order to allow plugins to implement players that
have their own idea about this.
+ cChannel::[AD]pid[12]() have been replaced with cChannel::[AD]pid(int i) to
allow access to all available PIDs.
- Escaped the '-' and 'ö' characters in the man pages (thanks to Darren Salt for
pointing this out).
- Completed the Italian OSD texts (thanks to Sean Carlos).
- Fixed setting 'synced' in cRemux when recording radio channels (thanks to
Laurence Abbott).
- Removed the LOCK_THREAD from the LIRC thread (thanks to Ludwig Nussel).
- Fixed genfontfile.c (sometimes the character width was wrong, and the codes were
shifted one too far to the left).
- Fixed the character width and shifted the codes one to the right in all font
files.
- Renamed font???.c to font???-iso8859-1.c for symmetry.
- Switched the character set to iso8859-15 for English, German and Finnish (thanks
to Andreas Brugger for reporting the missing Euro sign in iso8859-1).
- Added 'channels.conf.terr' entries for Lübeck (thanks to Stefan Hußfeldt).
- Fixed a race condition in starting a thread (thanks to Reinhard Nissl for
reporting this one).
- Replaced non-threadsafe library functions with their threadsafe versions (thanks
to Rainer Zocholl for pointing this out).
- Other non-threadsafe functions have been replaced by threadsafe classes that hide
the actual buffering. In particular these are:
readdir() -> cReadDir
readline() -> cReadLine
- Several formerly non-threadsafe functions now have a return type of cString:
cChannel::ToText()
tChannelID::ToString()
cEvent::GetDateString()
cEvent::GetTimeString()
cEvent::GetEndTimeString()
cEvent::GetVpsString()
cMark::ToText()
cTimer::ToText()
cSource::ToString()
cTimer::PrintDay()
cTimer::PrintFirstDay()
PrefixVideoFileName()
IndexToHMSF()
ChannelString()
strescape()
AddDirectory()
itoa()
WeekDayName()
DayDateTime()
When using these functions in a 'const char *' context there is nothing special
to consider, except that you can no longer have a pointer to the return value,
as in
const char *date = DayDateTime();
Although this will compile without error message, the resulting 'date' will not
be valid after this line. Use this instead:
cString date = DayDateTime();
In a 'const void *' context (as in printf() etc.) the result needs to be
dereferenced with a '*', as in
printf("%s", *DayDateTime());
to make it a 'const char *'.
- Removed delay_ms(), using cCondWait::SleepMs() instead.
- Replaced time_ms() with a threadsafe and non-overflowing cTimeMs (thanks to Rainer
Zocholl for pointing out this problem).
- Added cDevice::mutexReceiver to avoid a race condition when attaching/detaching
receivers from different threads.
- The new remote control button "Audio" can be used to switch between different
audio tracks. The "Green" button in the "Main" menu has been changed from "Language"
to "Audio", since it now also controls switching between normal and Dolby Digital
audio tracks (see MANUAL for details).
- The description of the audio tracks is now taken from the "component descriptors"
that are broadcast in the EPG data. However (as no big surprise), not all channels
actually provide useful data here, so there are now some additional EPG bugfixes,
which can be activated by setting the "EPG bugfix level" to 3.
- The format of the 'epg.data' files has been extended by the new tag 'X', which
contains the stream components of an event (see man vdr(5) for details).
- The cStatus class now has the new member function SetAudioTrack(), which can be
used to get notified when the audio track has been switched, and the new member
function SetAudioChannel() which is called when the audio channel is changed.
- Skins need to implement the new cSkinDisplayTrack class to display the audio
track menu.
- The ST:TNG skin now displays the current audio track description (if any) at the
botton left side.
- The new setup option "DVB/Audio languages" can be used to control which audio
language shall be selected in case a channel broadcasts in different languages
(see MANUAL for details).
- The "Left" and "Right" keys in the "Audio" menu can be used to switch between
the left and right stereo channels in case there are different audio tracks
in these channels (see MANUAL for details).
- Fixed a possible race condition in cDevice::Action() (thanks to Mattias Grönlund).
- Fixed the default quality value when grabbing a JPEG image (thanks to Patrick
Gleichmann).
- Fixed deleting a menu item in case the next item is not selectable (thanks to
Dino Ravnic).
- Implemented displaying mandatory subtitles in the SPU decoder (thanks to Marco
Schlüßler).
- The setup option "Recording/Record Dolby Digital" has been renamed and moved to
"DVB/Use Dolby Digital". It now controls whether Dolby Digital is recorded and
whether an available DD audio track will appear in the "Audio" menu.
- Added support for circular polarization (thanks to Jonan Santiago).
- Thanks to Werner Fink, Reinhard Nissl, Sascha Volkenandt and Bjørnar Nilsen for
their support in testing and fine tuning this version.
|
|
- Fixed cChannel::SetName() in case only the ShortName or Provider has changed
(thanks to Sascha Volkenandt for reporting this one).
- Added Danish language texts (thanks to Mogens Elneff).
- Reactivated the NPTL check at startup because there appear to be still
unsolved problems when running on NPTL systems.
- Added missing calls to cStatus::MsgOsdClear() in cSkins::Message() (thanks
to Joachim Wilke for reporting this one, and Andreas Regel for additional
input).
- Fixed the cDvbSpuDecoder (thanks to Marco Schlüßler).
- Fixed handling of pmAudioOnlyBlack (thanks to Stefan Huelswitt).
- Fixed a short glitch when starting a recording on the primary device while
in replay or transfer mode (thanks to Marco Schlüßler).
- Added missing initialization of cEvent::seen.
- Checking PID language codes for ISO 639 compliance to avoid problems with
funny characters. Invalid language codes will be stored as "???".
- The '0' key now toggles the "Day" item in the "Timers" menu between "single
shot" and "repeating". The keys '1'...'7' can be used to toggle the individual
days ('1' is Monday). Thanks to Sascha Klek for reporting a problem with the
'0' key in the "Day" item of the "Timers" menu.
|
|
- Fixed some typos in the Makefile's 'font' target (thanks to Uwe Hanke).
- Added more checks and polling when getting frontend events (based on a patch
from Werner Fink).
- No longer explicitly waiting for a tuner lock when switching channels
(apparently setting "live" PIDs before the tuner is locked doesn't hurt).
Moved the wait into cDevice::AttachReceiver() instead.
- Immediately displaying the new channel info when switching channel groups.
- Moved the main program loop variables further up to allow compilation with
older compiler versions (thanks to Marco Schlüßler for reporting this one).
- Now calling pthread_cond_broadcast() in the destructor of cCondWait and
cCondVar to make sure any sleepers will wake up (suggested by Werner Fink).
Also using pthread_cond_broadcast() instead of pthread_cond_signal() in
cCondWait, in case there is more than one sleeper.
- Making sure that timers and channels are only saved together, in a consistent
manner (thanks to Mirko Dölle for reporting a problem with inconsistent
channel and timer lists).
- Now handling the channel name, short name and provider separately. cChannel
therefore has two new functions, ShortName() and Provider(). ShortName()
can be used to display a short version of the name (in case such a version
is available). The optional boolean parameter of ShortName() can be set to
true to make it return the name, if no short name is available.
The sequence of 'name' and 'short name' in the channels.conf file has been
swapped (see man vdr(5)).
- Added the 'portal name' to cChannels (thanks to Marco Schlüßler).
- Fixed handling key codes that start with 0x1B in the KBD remote control code.
- Now using qsort() to sort cListBase lists. For this, the virtual function
cListObject::operator<() has been replaced with cListObject::Compare().
Plugins that implement derived cListObject classes may need to adjust their
code.
- The "Channels" menu can now be sorted "by number" (default), "by name" and
"by provider". While in the "Channels" menu, pressing the '0' key switches
through these modes.
- Fixed the buffer size in cRecording::SortName().
- Now displaying the name of the remote control for which the keys are being
learned inside the menu to avoid overwriting the date/time in the 'classic'
skin (thanks to Oliver Endriss for reporting this one).
|
|
- Fixed detecting transponder lock in cDvbTuner (based on a patch from Stefan
Meyknecht).
- What was previously marked with WAIT_FOR_LOCK_AFTER_TUNING is now permanently
active and uses a cCondVar to signal when a transponder is locked.
- Added some missing 'const' to cChannel.
- Added a sample setup for 'DisiCon-4 Single Cable Network' to 'diseqc.conf'
(thanks to Oliver Endriss).
- Fixed attaching a cPlayer to a cDevice, so that 'Operation not permitted'
errors don't occur any more (thanks to Marco Schlüßler).
- Fixed a case where the resultBuffer in cRemux ran full before getting a sync.
- Removed the usleep() call from cDvbPlayer::Action() to make VDR run on NPTL
systems (thanks to Alfred Zastrow). The NPTL check at startup has also been
removed.
- Taking the complete size of available data into account when deciding whether
to clear the transfer buffer to avoid overflows (thanks to Reinhard Nissl).
- Updated Romanian language texts and the iso8859-2 fonts (thanks to Lucian Muresan).
- Now actually using the iso8859-15 fonts (thanks to Lucian Muresan).
- Some minor code cleanups (thanks to Prakash K. Cheemplavam).
- Fixed missing cleanup at program exit in case there is a problem with a plugin
(thanks to Mattias Grönlund for pointing this out).
- Increased the required free buffer space in the resultBuffer of cRemux to
2 * IPACKS to avoid a buffer overflow in case a cTS2PES writes one complete
packet and then (within processing the same TS packet) wants to write another
small packet.
- Removed the signal handler and WakeUp() call from cThread (it is no longer
needed).
- Added some checks when canceling a thread and removed the usleep() in
cThread::Start() (suggested by Ludwig Nussel). Also removed 'running' from
cThread and using only childTid to indicate whether a thread is actually
running.
- Added cCondWait::Sleep() and using it to replace all usleep() calls (based
on a suggestion by Werner Fink).
- Only assigning events to timers if the related schedule has actually been
modified.
- When searching for the present event, the running status is now only taken
into account if the event has been "seen" within the past 30 seconds.
This avoids shortly seeing the wrong events in the channel display when
switching to a channel that hasn't been tuned to in a while.
|
|
- Fixed a crash when switching the skin and having selected a non-default theme
that is not available for the newly selected skin (thanks to Sascha Volkenandt
for reporting this one).
- Fixed some issues with gcc 3.4 (thanks to Prakash K. Cheemplavam and Marcel
Wiesweg).
- Added a hint to PLUGINS.html about how to name a plugin that implements a skin.
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Single shot timers and events now show the day of week (adopted with some changes
from the "elchi" patch, orginally introduced by Oskar Signell). Plugins that use
cEvent::GetDateString() should note that this function now returns a longer
string, including the day of week. The new function const char *WeekDayName(time_t t)
can be called with a time_t value to get the day of week for that time.
- When processing XPM data, the color name "None" is now mapped to #00000000, which
is "fully transparent" (suggested by Sascha Volkenandt).
- Fixed the OSD alignment in the SPU decoder (thanks to Miko Wohlgemuth for reporting
this one and helping to test the fix).
- Fixed freezing picture when a recording starts on a system that always uses
'Transfer Mode' (thanks to Michal Dobrzynski for reporting this one).
- Fixed a memory leak in NIT processing (thanks to Marcel Wiesweg).
- Added a few missing initializations (thanks to Marcel Wiesweg).
- Moved the declaration of cMenuText to VDR/menu.h to make it available to plugins.
It now also has a SetText() function that can be used to dynamically set the text
in an already existing cMenuText (both suggested by Stefan Huelswitt).
- Added play mode pmVideoOnly (thanks to Marcel Wiesweg).
- Added a missing cStatus::MsgOsdClear() to cDisplayChannel::~cDisplayChannel()
(thanks to Oliver Endriss).
- No longer displaying unused color buttons in the "Classic VDR" skin (thanks to
Oliver Endriss for reporting this one).
- Added some missing cStatus::MsgOsdTextItem() calls (thanks to Oliver Endriss for
reporting this one).
|
|
- Completed the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Fixed some descriptor handling in 'libsi' (thanks to Stéphane Esté-Gracias).
- Fixed handling the current menu item (thanks to Marc Hoppe).
- Fixed assigning events to timers (they no longer get "stuck").
- Added log entries whenever the running status of an event changes (currently
only logging the first 30 channels).
- Fixed handling timers in VPS margin if the EPG scan is turned on (the EPG scan
switched the device away from the channel, so it wouldn't see the change of
the running status).
- Fixed handling "itemized" texts in EPG data (thanks to Stéphane Esté-Gracias
for pointing out this problem, and Marcel Wiesweg for improving 'libsi').
- Fixed handling VPS times at year boundaries.
- Avoiding too many consecutive "ring buffer overflow" messages (which only
slowed down performance even more).
- Taking the Sid into account when detecting version changes in processing the
PMT (thanks to Stéphane Esté-Gracias for pointing out this problem).
- Completed the Russian OSD texts (thanks to Vyacheslav Dikonov).
- Any newline characters in the 'description' of EPG events are now preserved
to allow texts to be displayed the way the tv stations have formatted them.
This was also necessary to better display itemized texts.
- Fixed detecting the running status in case an empty EPG event is broadcast (thanks
to Michael Pennewiß for pointing this out).
- Improved performance when paging through very long menu lists.
- Removed cSchedule::GetEventNumber() and cSchedule::NumEvents(). There is now
cSchedule::Events() that returns the list of events directly.
- Avoiding occasional bad responsiveness to user interaction caused by assigning
events to timers.
- Now explicitly turning on the LNB power at startup, because newer drivers don't
do this any more (thanks to Oliver Endriss for pointing this out).
|
|
- Fixed reading the EPG preferred language parameter from 'setup.conf'.
- Fixed switching to a visible programme in case the current channel has neither
a video nor an audio PID.
- Fixed editing channels (SID now range checked) and creating new channels (NID,
TID and RID are now set to 0).
- Fixed transponder handling to make it work with satellites that provide two
transponders on the same frequency, with different polarization, like Hispasat
at S30.0W (thanks to Thomas Bergwinkl for pointing this out). See man vdr(5)
for details about the enhanced channel ID format.
- Since there appears to be no general solution for the UPT error yet, a recording
now initiates an "emergency exit" if the number of UPT errors during one
recording exceeds 10 (suggested by Gregoire Favre). Since the UPT error doesn't
happen on my system, this has not been explicitly tested.
The "preliminary fix" for the UPT error in VDR/dvbdevice.c has been disabled
by default, since it makes channel switching unpleasently slow. If you want
to have that workaround back, you can uncomment the line
//#define WAIT_FOR_LOCK_AFTER_TUNING 1
in VDR/dvbdevice.c.
- Adapted the 'sky' plugin to use the actual channel IDs, and to fetch EPG data
from www.bleb.org.
- Limited automatic retuning to devices that actually provide the transponder
(necessary for the 'sky' plugin).
- Fixed handling receivers in the 'sky' plugin, so that a recording on the same
channel won't interrupt an ongoing Transfer Mode.
- Added subtable ID and TSDT handling to 'libsi' (thanks to Marcel Wiesweg).
- Fixed some Russian OSD texts (thanks to Vyacheslav Dikonov).
- Added the 'running status' to the EPG events. This is necessary for implementing
the VPS function for recording.
- Removed the obsolete 'present' and 'following' handling from the EPG data.
- The EPG data is now always kept sorted chronologically in the internal data
structures. This also means that any EPG data retrieved through the SVRDP
command LSTE is guaranteed to be sorted by start time.
- Now using the 'running status' in the channel display, so that a programme
that has an end time that is before the current time, but is still running,
will still be shown in the display (provided the broadcasters handle the
'running status' flag correctly). This also applies to programmes that have
a start time that is in the future, but are already running.
- Implemented an "EPG linger time", which can be set to have older EPG information
still displayed in the "Schedule" menu (thanks to Jaakko Hyvätti).
- Added PDCDescriptor handling to 'libsi'.
- Implemented handling the VPS timestamps (aka "Programme Identification Label")
for full VPS support for timers (provided the tv stations actually broadcast
this information). The VPS time is displayed in the event info page if it exists
and is different than the event's start time.
- Extended the SVDRP command LSTE to allow limiting the listed data to a given
channel, the present or following events, or events at a given time (thanks to
Thomas Heiligenmann).
- Fixed a typo in libsi/si.h (thanks to Stéphane Esté-Gracias).
- Timers can now be set to use the VPS information to control recording a programme.
The new setup options "Recording/Use VPS" and "Recording/VPS margin", as well as
the "VPS" option in the individual timers, can be used to control this feature
(see MANUAL for details).
Note that this feature will certainly need a lot of testing before it can be
called "safe"!
- The "Schedule" and "What's on now/next?" menus now have an additional column
which displays information on whether there is a timer defined for an event,
whether an event has a VPS time that's different than its start time, and
whether an event is currently running (see MANUAL under "The "Schedule" Menu"
for details).
|
|
- Fixed a lockup in the EPG scanner when no non-primary device was available
(thanks to Martin Holst for reporting this one).
- Fixed a compiler warning about virtual cConfig::Load() functions (thanks to
Lauri Tischler for reporting this one).
- Fixed a warning about character comparison in libsi/si.c (thanks to Lauri
Tischler for reporting this one).
- The new parameter "Update channels" in the "Setup/DVB" menu can be used to
control if and how channels will be automatically updated (see MANUAL).
This has already been part of the 'autopid' patch by Andreas Schultz and has
now been adopted.
- Fixed a crash in case there is no DVB hardware present (thanks to Sascha
Volkenandt for reporting this one).
- Changed calculation of channel ids to make it work for tv stations that use
the undefined NID value 0 (thanks to Teemu Rantanen for reporting this one).
- Enhanced the SDT filter to handle multi part sections.
- Added support for selecting preferred EPG languages (based upon a patch by
Teemu Rantanen).
- Fixed a 'const' in libsi/si.h (thanks to Marcel Wiesweg).
- Fixed the 'su' call in 'runvdr' to make it work on systems that require the
user name to appear before the command option (thanks to Robert Huitl).
- Fixed testing for matching section filters in case they are turned off (thanks
to Marcel Wiesweg).
- In case of incomplete sections an error message is now logged only every 10
seconds.
- Fixed a possible NULL pointer access in cEITScanner::Process() (thanks to
Andreas Kool).
- The actual transponder data is now taken from the NIT and existing channels
are adjusted if necessary. If the NIT contains new transponders, they are
scanned for channels during the next EPG scan. Note that only the satellite
branches are tested, cable and terrestrial need to be tested by somebody who
actually has such equipment.
|
|
- Changed thread handling to make it work with NPTL ("Native Posix Thread Library").
Thanks to Jon Burgess, Andreas Schultz, Werner Fink and Stefan Huelswitt.
- The cThread class now accepts a 'Description' parameter, which is used to log
the beginning and end of the thread, together with its process and thread id.
For descriptions that need additional parameters you can use the function
cThread::SetDescription(), which accepts 'printf()' like arguments.
Existing plugins that use threads should be changed to use this functionality
instead of explicit 'dsyslog()' calls inside their Action() function in order
to support logging the thread ids.
- Added "Slovak Link" and "Czech Link" to 'ca.conf' (thanks to Emil Petersky).
However, 'ca.conf' is now pretty much obsolete due to the automatic CA handling.
- Mutexes are now created with PTHREAD_MUTEX_ERRORCHECK_NP, which makes the
'lockingTid' stuff obsolete (thanks to Stefan Huelswitt).
- Changed font handling to allow language specific character sets.
- Adopted the small font character set from the "Elchi" patch (originally
provided by Alessio Sangalli).
- Greek language texts now use iso8859-7 character set (thanks to Dimitrios
Dimitrakos).
- Rearranged section data handling, so that the actual data handling can be done
separately, even from within plugins.
- The EPG data structures have been moved from eit.[hc] to epg.[hc] and have been
adapted to the general VDR coding style. Plugins that use these data structures
may need to change some function names (which should be obvious).
The name 'subtitle' has been changed to 'shortText' to avoid clashes with actual
subtitles that are part of a movie. The name 'extendedDescription' has been
shortened to 'description'.
- Replaced 'libdtv' with 'libsi' (thanks to Marcel Wiesweg), which is thread
safe and can be used by multiple section filters simultaneously.
- Added 'cRwLock' to 'thread.[hc]'. Note that all plugin Makefiles need to
define _GNU_SOURCE for this to work (see the example plugin Makefiles and
'newplugin').
- Fixed a problem with crc32 in SI handling on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Fixed an alignment problem in CAM access on 64bit systems (thanks to Pedro
Miguel Sequeira de Justo Teixeira for reporting this one).
- Added 'StreamType' setting to CAM communication, which is important for
Aston/SECA CAMs (thanks to Antonino Sergi).
- Now the CA descriptors are sent to the CAM in the 'program' or 'ES level'
sections, depending on where they are found in the PMT (thanks to Hans-Peter
Raschke for reporting this one). This should make SkyCrypt CAMs work.
- Now using the 'version number' of EPG events to avoid unnecessary work.
- Channel data is now automatically derived from the DVB data stream (inspired
by the 'autopid' patch from Andreas Schultz).
- The current channel is now automatically re-tuned if the PIDs or other settings
change. If a recording is going on on a channel that has a change in its
settings, the recording will be stopped and immediately restarted to use the
new channel settings.
- EPG events now use the complete channel ID with NID, TID and SID.
- Channel names in 'channels.conf' can now have a short form, as provided
by some tv stations (see man vdr(5)). Currently channels that provide short
names in addition to long ones are listed in the OSD as "short,long name",
as in "RTL,RTL Television". The short names will be used explicitly later.
- The Ca parameter in 'channels.conf' has been extended and now contains all the
CA system ids for the given channel. When switching to a channel VDR now tests
for a device that provides one of these CA system ids. The devices automatically
get their supported ids from the CI handler.
- The values in 'ca.conf' are currently without any real meaning. Whether or not
a channel with conditional access can be received is now determined automatically
by evaluating its CA descriptors and comparing them to the CA system ids
provided by the installed CAM. Only the special values 1-16 are used to assign
a channel to a particular device.
- Increased the maximum number of possible OSD colors to 256.
- Limited the line length in the EPG bugfix report, which appears to fix a buffer
overflow that caused a crash when cleaning up the EPG data (at 05:00 in the
morning).
|
