|
- Added Macedonian language texts (thanks to Dimitar Petrovski).
- Updated the Estonian OSD texts (thanks to Arthur Konovalov).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added handling of EnhancedAC3DescriptorTag (thanks to Eric Valette).
- The default SVDRP port is now 6419 (registered with ICANN/IANA by Christian Tramnitz).
Use '-p 2001' to switch back to the old port if necessary.
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- cDvbDevice::ProvidesTransponder() now checks the modulation capabilities of the
device (as far as the driver allows this).
- Fixed cFrameDetector::Analyze() in case part of the data has been processed and
there is less than MIN_TS_PACKETS_FOR_FRAME_DETECTOR left (reported by Derek Kelly).
- Added a note about not deleting cDeviceHook objects to device.h.
- Added user defined key kUser0 (suggested by Ulf Kiener).
- Include paths are now added instead of overwriting INCLUDES in the Makefile (thanks
to Paul Menzel).
- The various modulation types are now taken into account when selecting a device for
a recording or live viewing, so that devices that provide more capabilities are
spared.
- Fixed generating PMT language descriptors for multi language PIDs (thanks to Rolf
Ahrenberg).
- Transponders that use "8psk turbo fec" (a non-standard mode used by North American
providers) are now identified by assuming that all 8psk transponders on DVB-S use
"turbo fec". In order to determine whether a certain device can handle "turbo fec",
the new driver flag FE_CAN_TURBO_FEC is checked. If your device can handle "turbo
fec", and your driver doesn't have that flag, yet, you can apply the patch from
ftp://ftp.tvdr.de/vdr/Developer/v4l-dvb-add-FE_CAN_TURBO_FEC.diff. A temporary
macro in dvbdevice.c defines the flag for all those who don't need this in the
driver, so that they can continue using an unmodified driver.
Thanks to Derek Kelly for testing this.
- Updated the Ukrainian OSD texts (thanks to Yarema Aka Knedlyk).
- Fixed handling "none" color entries in XPM files (thanks to Thomas Günther).
- Fixed a crash when creating a new channel if the channel list is empty (reported
by Halim Sahin).
- Updated the Czech OSD texts (thanks to Radek Stastny).
- Fixed a possible out of buffer memory access in case of bad TS data (reported
by Rolf Ahrenberg).
- Implemented handling of HD resolution subtitles according to v1.3.1 of
ETSI EN 300 743, chapter 7.2.1 (thanks to Rolf Ahrenberg).
- The EPG data now handles stream components 5 (H.264-video) and 6 (HEAAC-audio).
- Fixed a problem with external Dolby Digital processing via the '-a' option in live
mode and with TS recordings (reported by Christopher Reimer).
- Added handling MPEG audio types "ISO/IEC 14496-3 Audio with LATM transport syntax"
and "ISO/IEC 13818-7 Audio with ADTS transport syntax" (suggested by Luis Fernandes).
See man vdr(5) on how the APID section of channels has been extended to store
this information.
- Added detecting channels that use service type 0x16.
- Added full handling of the stream types of Dolby Digital pids
(thanks to Jose Alberto Reguero).
- The new setup option "OSD/Number keys for characters" can be used to control whether
the number keys can be used to enter characters in a text input field (suggested
by Stefan Huskamp).
|
|
- Fixed 'Transfer Mode' in cases where a non-primary interface was switched to
a channel that only the primary interface can receive (which could happen in
the EPG scanner).
- The EPG scanner now starts with the first channel (it used to start with the
second channel).
- Reacitvated setting the PNR.
- Adapted the frame scanning to the new muxing of the driver.
- The new compile time option REMOTE=NONE can be used to compile VDR without
any remote control support (for applications where it shall be controlled
exclusively via SVDRP).
- The new command line option -D can be used to define which DVB interfaces
a certain instance of VDR shall use.
- The "Left" and "Right" keys are now used to page up and down in lists (thanks
to Martin Hammerschmid). Since the "Timers" menu already uses these keys to
(de)activate timers, this functionality is not available there.
- The "Main" and "Commands" menu now support "hotkeys", which means that if the
first non-blank character of a menu item is a digit in the range 1..9, that
item can be selected by pressing the respective numeric key on the remote
control.
- The channel data in 'channels.conf' now contains the teletext PID (thanks to
Dave Chapman). Existing files will be read normally (and the teletext PID set
to 0), but once they are written back (due to some channel editing) the file
will have the new format.
- The EPG scanner now scans each transponder only once per cycle.
- Deleted recordings are now automatically removed from disk after a while (not
only when disk space is being needed for a new recording).
- Fixed repeat function in LIRC remote control.
- Changed the MAXDVBAPI macro in dvbapi.c to 4 in order to directly support the
maximum possible number of DVB cards.
- The 'Ca' parameter in the default 'channels.conf' has been changed from '2'
to '3' because the VDR prototype now has 3 DVB cards (and currently the CAM
module only works if it is inserted into the last DVB card).
- The "Now", "Next" and "Schedule" menus now remember the current channel and
restore the list when switching between them.
- The "Green" button in the "Recordings" menu can now be used to rewind a
recording and play it from the very beginning.
- Fixed handling ':' in timer filenames and '\n' in timer summaries (see FORMATS).
- When removing recordings empty directories are now removed from the video
directory.
- Added the "schnitt" tools from Matthias Schniedermeyer.
- New SVDRP command MESG to display a short message on the OSD.
- The Perl script 'svdrpsend.pl' can be used to send SVDRP commands to VDR.
- SVDRP can now immediately reuse the same port if VDR is restarted.
- SVDRP now has a timeout after which the connection is automatically closed
(default is 300 seconds, can be changed in "Setup").
- The compile time switch VFAT can be used to make VDR avoid the ':' character
in file names (VFAT can't handle them). Do 'make VFAT=1' to enable this.
- Support for DVB-C (thanks to Hans-Peter Raschke and Peter Hofmann).
See the INSTALL file for more information about the use of VDR with cable.
- Fixed an occasional segfault in the EIT processor.
- A value of '0' for the EPGScanTimeout setup parameter now completely turns off
scanning for EPG data on both single and multiple card systems.
- New setup parameter "PrimaryLimit" that allows to prevent timers from using the
primary DVB interface in multi card systems. Default value is 0, which means
that every timer may use the primary interface.
- The 'active' field of a timer will now be explicitly set to '1' if the user
modifies an active timer (see FORMATS for details).
- The new command line option -w can be used to activate a watchdog that makes
VDR exit in case the main program loop does not respond for more than the
given number of seconds. This is mainly useful in combination with the new
'runvdr' script that restarts VDR in case is has exited.
|
