diff options
Diffstat (limited to 'contrib/HISTORY')
| -rw-r--r-- | contrib/HISTORY | 359 |
1 files changed, 0 insertions, 359 deletions
diff --git a/contrib/HISTORY b/contrib/HISTORY deleted file mode 100644 index 8b6a331..0000000 --- a/contrib/HISTORY +++ /dev/null @@ -1,359 +0,0 @@ -v0.97 -- unknown (taken from linvdr 0.7) - -v0.96 -- tom -- Tue Apr 6 15:43:16 CEST 2004 - - Reworked timer collision detection (Thanks to Cooper) - - Corrected Power button link in the remote control (Thanks to Tobias Grimm) - - Solved some javascript issues - -v0.95 -- tom -- Sat Dec 13 14:55:04 CET 2003 - - Added support to listen on specific network adresses (Thanks to - Ludwig Nussel) - - Added two new parameters (--message, --displaycall) - - Added some code from the "vdradmin BigPatch" - - Added help system - Fixed Bugs: - - AutoTimer does not work correct if the specified time range goes over - midnight (Thanks to Cooper) - - Solved the "daylight saving" problem (2h offset) - - Solved some problems with gzip compression - -v0.94 -- tom, mdo -- Mon Aug 18 06:32:47 CEST 2003 - - Cleared up some things in the "timer new"/"timer edit" form: - We have now a new line for automatic timer correction, possible values - are "program ID" for the Event-ID as key, "recording time" for the start/end - time of the recording as keys, and "disabled" for uncorrected timers. - - There are two new variables which can be added to the config file - vdradmind.conf by hand (no fronted support!): - NO_EVENTID = 1 - and - NO_EVENTID_ON = 23,24,25 - will disable the usage of event-ids in general or on channels 23 to 25 for - all new timers. - So the automatic timer correction -- both for auto timers and for manual - edited -- will fall back to "recording time" mode. This is interesting for - channels where the Event-ID changes between first show-up in the EPG and - the event (thanks to Jan Ekholm for the idea and his help with debugging). - - New search string handling in AutoTimer: - /regexp/ - and - /regexp/i - are perl regular expression, the second one is case insensitive. - The regexp is testet against a string of the form: - title~subtitle~summary - As you see, all checked fields in the AutoTimer edit form are separated - by a tilde (~). So you can explicitly search the title, subtitle and - summary entry for matches. - I advise you not to use any regular expressions in the AutoTimer, never! - There is absolutely *no* syntax check for the regexp! Leave a stray - brace and see vdradmin dying (because of a perl syntax error), or enter - something like "/.*/" to beam the entire EPG into the timer list and watch - VDR dying under the tons of timers. - Don't write bug reports if a regexp has filled your harddisk to the very - last bit, messed your timer list or killed your VDR: I told you not to use - regular expressions! Don't even think about it! - All non-regexp are now threatened as space separated list of patterns - without any wildcards: Dots are a real dots, braces are real braces, - and little furry things from Centaur 5 are real little furry things from - Centaur 5. - Fixed Bugs: - - Month in "Whats on now" calculated wrong (Thanks to Thomas Schmidt) - - Day in Event detail calculated wrong (Thanks to Thomas Schmidt) - -v0.93 -- tom -- Tue Jul 15 12:09:34 CEST 2003 - Fixed Bugs: - - Several issues with the Internet Explorer - - Doesn't delete a recording timer - -v0.93 -- mdo -- - - The 16th bit of the status field of timers will now be used for indicating - automatically revised timers ("Auto"). Old timers with status "Auto", using - the now deprecated third bit (see v0.24-pre13-mdo), will *in this version* - be described as "Auto (alt)" or "Auto (old)" in the timer list. Editing an - timer with status "Auto (old)" will correct the flag properly. - - CAUTION! Using the third bit (as in v0.24-pre13-mdo up to v0.92) is now - *deprecated* and the support for the third bit will *definitively* be - removed in the next version of vdradmin! Due this change only affects - single timers, all old timers will disappear within the next month -- new - "Auto" timers will be programmed properly. So before updating to the next - version of vdradmin (probably v0.94), check that you don't have any old - "Auto" timers left, or they won't be observed/revised any longer (but work - anyway). - -v0.92 -- tom -- Tue Jul 4 10:49:13 CEST 2003 - Fixed Bugs: - - Several things in the log mechanism - - Can't delete multiple Auto Timers at once (Thanks to Tom Pfeifer) - - Sometimes wrong display of rec icon (Thanks to Tom Pfeifer) - - Recordings frame missing if no recordings on disk (Thanks to Tom Pfeiffer) - -v0.91 -- tom -- Wed Jun 18 07:36:40 CEST 2003 - - Added "Directory" option in Auto Timer (Suggested by Christian Jacobsen) - Fixed Bugs: - - Can't save complex timer (Thanks to Tom Pfeifer) - -v0.90 -- tom -- Sun Jun 15 01:20:00 CEST 2003 - - New German layout (Thanks to Uwe Kempf) - - Translated layout to English - - Translated layout to French (Thanks to Olivier Jacques and Laurent DUPERREY) - - subfolders in recordings (like in VDR) - - Added TV mode - - show disk usage in recordings menu (require VDR 1.1.29) - - added "install" target, this is mainly for distributors - - Reworked Auto Timer (Thanks to cooper) - Fixed bugs: - - Small patch to make vdradmin work together with the analogtv plugin - (Thanks to Andreas Kool) - - Added patch to make apache 2.0.40 with it's mod_proxy happy - (Thanks to Thomas Sailer) - - many, many other small things i don't remember - -v0.24-pre13-mdo -- cooper -- Tue May 27 03:10:39 CEST 2003 - - major changes in AutoTimer(): - - for each autotimer the event_id from the EPG will be stored in the - higher 16 bits of the status value in the timers.conf. Be prepared - to see huge and tiny (negative) numbers in the timers list! - - for all autotimers, the 3rd bit in the status value (first row in - timers.conf) will be set, along with the 1st bit (plus the high - 16 bit as mentioned before) - - will only programm new timers, changing existing timers is now the - job of CheckTimers() - - AutoTimer() will only add new timers, if the event_id and the channel - number of the desired event are not in the current timers.conf. If - there is no event_id, AutoTimer() will check for the name and start time - like in privious versions of vdradmin - - new function CheckTimers(): - - is called every time just before AutoTimer() - - will check every timer of timers.conf with the 3rd bit set in the status - value: - - if there is an event_id, CheckTimers() will search a event with the - same event_id on the same channel in the EPG, and then set title, - subtitle, start/stop time, day of recording and summary according to - the EPG entry. If there is no matching event_id, nothing happens. - - without event_id, CheckTimers() looks for events in the EPG within - the margins of the timer, then do a wighting. For the event with the - highest wight, CheckTimers() extends the margings of the timer so - the event will be fully covered, plus extra time. This will probably - fail when multiple events of 10 minutes duration or shorter are within - the timer margins -- due the timer will only be extended but never - shortened, this should be no real problem. The title of the event is - unchecked. If there is no matching EPG entry, nothing happens. - - other changes: - - the default status for new timers is now 5 (equal to "Auto"), which - means they'll be handled by CheckTimers(), an the event_id will be set. - CheckTimers() will, as described above, change start/stop time and some - more according to the current EPG. To get rid off the automatic - observation, set the status to 0 or 1 (Yes/Ja or No/Nein). The side - effect is that you'll lose the event_id, and if you set the status back - to "Auto" again, CheckTimers() will use the "without event_id" branch - to extend the timer margins. - - side effects: - - the status field (first row) of timers.conf will contain very huge and - tiny numbers between -2147483647 and 2147483647, instead of 0, 1 and 3. - While this is fully covered by Klaus' documentation, it could be some - surprise to other programms parsing the timers.conf or reading the timers - list via lstt from SVDRP, like Master Timer and others. - - editing a timer via VDR will cause the loss of the event_id and set the - status back to 0 or 1 -- so CheckTimers() won't touch it no longer. This - is a feature. - - the start time of observed timers might be changed while VDR is - recording -- resulting in a new file and a little gap between the two - recordings. Should be fixed somewhen. - - observed timers with ":" in the name will cause unnecessary timer - updates because the ":" will cause an inequality between timer title - and event title. - - the title of obeserved timers will be extended automatically by the - subtitle (when in EPG), even if the original title was without subtitle. - - double recordings (same start time, same title) are now very improbable, - but still possible. Should be managed by CheckTimers() somewhen... - -v0.23 -- tom -- Sat Feb 15 22:46:01 CET 2003 - - Now delivering compressed data (like mod_gzip) if the browser accept this. - This makes vdradmin much faster on slow connections. This is experimental, - so if you have problems with this set MOD_GZIP to 0 in your vdradmin.conf. - Fixed Bugs: - - Now opening remote control with target _blank (Thanks to Martin Hillmann) - - Saving timers don't work if priority or lifetime less then 10 (Thanks - to _cooper_) - - Fixed typo in english configuration page (Thanks to Briandorling) - -v0.22 -- tom -- Thu Jan 16 14:08:31 CET 2003 - - Reworked timer sort routine - - Included virtual remote control - Fixed bugs: - - some small layout things - -v0.21 -- tom -- Mon Dec 30 22:34:37 CET 2002 - - Added guest account - - Startpage is now selectable - Fixed Bugs: - - Several things in the Autotimer - -v0.20 -- tom -- Thu Dec 26 13:21:39 CET 2002 - Fixed Bugs: - - Using wrong variable to connect to vdr - -v0.19 -- tom -- Thu Dec 26 03:20:12 CET 2002 - Fixed Bugs: - - Pictures are no longer missing - - "--config" sets wrong variables - - Timer sometimes disapeared - - AutoTimer doesnt run after timeout - - Cant save complex timers - - many other small things... - -v0.18 -- tom -- Tue Dec 17 20:52:09 CET 2002 - - vdradmin does not longer use HTTP::Daemon - - updated english translation - -v0.17 -- tom -- Mon Dec 16 14:19:28 CET 2002 - - Channels without EPG-data are not longer displayed in program list - - No longer add spaces to Summary when changing Timer (Thanks to _cooper_) - - Sorts repeating Timers like VDR (Thanks to Emil Naepflein) - - Three colors shows how timers conflicts with other timers (Thanks to Emil Naepflein) - - Now using HTTP::Daemon to comunicate with clients - - vdradmin knows about first-day timers - - Code cleanup - - Some other things i dont remember - -v0.16 -- tom -- Sun Jun 9 14:58:57 CEST 2002 - Fixed Bugs: - - Auto Timer does nothing if no end time was given - (this bug was introduced in v0.15) - -v0.15 -- tom -- Son Jun 2 17:32:44 CEST 2002 - Fixed Bugs: - - vdradmin exits with "Bad arg length for Socket::unpack..." - under some perl versions. (Thanks to Juergen Schmidt) - - Saving Auto Timers doesnt work in English theme - - Selecting channels for a new Auto Timer doesnt work in German theme. - - Auto Timer does not work if the timer goes across midnight - _and_ the start time is beyond midnight (Thanks to Andrea Schultz). - -v0.14 -- tom -- Sat Apr 13 13:33:00 CEST 2002 - - - English translation added (Thanks to Thilo Wunderlich and Simon Dean) - - Translations / Themes are stored in subdirectorys (suggested by - Thilo Wunderlich) - - internationalized days of week (see template/<lang>/i18n.pl) - - Changed names of Language. If you wish to use your old vdradmind.conf - change "LANG = de" in "LANG = Deutsch". - - Fixed Bugs: - - Sometimes the language could not be changed. - - Priotity in Auto Timer was lost in some cases. - - State row in channels view was lost if the Broadcaster has no EPG - - Various small things coming with the internationalisation - -v0.13 -- tom -- Mit Mar 6 21:09:02 CET 2002 - - - Added `switch to channel´ function in program overview. - - Fixed date bug with vdr > 1.0.0pre1 - -v0.12 -- tom -- Fre Feb 15 19:44:26 CET 2002 - - - vdradmin crashed when deleting a timer. fixed. - - Fixed many bugs in the timer section - - vdradmin is now compatible with apache & mod_proxy - (thanks to Marcel Walter) - -v0.11 -- tom -- Tue Feb 5 21:25:21 CET 2002 - - - Renamed configuration file. "conffile" -> "vdradmind.conf". If you - wish to use your old configuration file, rename it manualy. - - Added "auto timer" function. - - In timer and recordings menu, multiple entrys can be deleted at once - - Some layout changes - -v0.10 -- tom -- Sam Jan 26 18:27:24 CET 2002 - - - Added complex timer handling - - Fixed broken pipe messages - - Some layout changes - - Modified search function, it does not longer search the exact pattern - (eg. ´one two´ does not search the exact pattern, it now means one - _and_ two) - - When creating a new timer, the timer is activated by default - - After creating a timer from program overview or list you will redirected - where you have been (instead of showing timer overview) - -v0.9 -- tom -- Tue Dec 11 13:38:22 CET 2001 - - - Whoops, fixed stupid bug in recordings sort mechanism - - Added configuration mechanism (--config) - - Added kill parameter (--kill) - - Added prev/next link in program listing - - Adding multiple channels in positive list fails if the list is empty. Fixed. - -v0.8 -- tom -- Sun Dec 2 11:55:43 CET 2001 - - - Time was calculated wrong in recordings section - -v0.7 -- tom -- Sat Dec 1 17:19:48 CET 2001 - - - vdradmin exits with error message if no recording exists. Fixed. - - Added a option which allowes to see only selected channels in program list - - List of recordings now sortable by date, time and name - - Sorted timers - - Time was calculated wrong in the timers section, month's range is 0-11 - not 1-12 - -v0.6 -- tom -- Sun Nov 25 17:31:02 CET 2001 - - - Broadcasters now sorted case insensitive in channel overview - - Encoded '&' very special since IE is too stupid to handle this correctly - - Seperated events in channel list by days - - Sorted recordings by date _and_ time - - Under heavy load vdradmin exits with sigpipe. Fixed. - - Added a search function - -v0.5 -- tom -- Wed Nov 14 12:09:35 CET 2001 - - - Fixed problem with complex timers in timer overview - -v0.4 -- tom -- Wed Nov 14 00:58:31 CET 2001 - - - vdradmin must not longer be started from the directory where it lives in. - - Sorted broadcasters by name in 'Was laeuft jetzt?' - - Added logging mechanism - - Added a 'go!' button in the channel overview - - The time field in the channel summary now eats almost everything. - (e.g. 1920, 19,20, 19.20, 19:20 produces all the same) - - The time buffer (e.g. 5 minutes before/after every movie) was in some - cases calculated wrong. Fixed. - - A click on the name of a recording shows the summary - - Sometimes (if a request was interrupted) the program exits with a - SIGPIPE. Fixed. - - If a timer was (re)edited the channel selection was wrong - - EPG data now stored in a tree (internal). - - as ever, other things i don't remember - -v0.3 -- tom -- Thu Oct 25 21:50:12 CET 2001 - - - vdradmin has now a integrated webserver. No Apache needed. - - A configurating menu added. - - Sometimes (if a timer is recording) deleting this timer deletes the - next one. Fixed. - - EPG and Channel Data now hold in memory. - - Several speed improvements. - - It's now possible to select the channels listed in 'Was laeuft jetzt?' - - I forgot the rest ;) - -v0.2 -- tom -- Sat Oct 13 01:10:50 CET 2001 - - - Viewing and deleting recordings a now possible (thanks to Thomas - Heiligenmann) - - It's now possible to support several languages. vdradmin suports at the - moment only German. - - The funktion of the 'Was laeuft jetzt?' was extended, it's now possible - to show whats going on at eg. twelve a clock (assuming thats now nine - - Sometimes in the channel listing two show's have the same color. Fixed. - - Channel file was now also cached (to speed up) - - Sending "quit\r\n" before closing SVDRP socket - - A timer that titel field contains a ":" was not correct displayed - - many, many other thins i don't remember - -v0.1 -- tom -- Tue Oct 9 00:12:12 CET 2001 - -- Initial release - |