Project

General

Profile

Actions
Copy link

Feature #1610

open

Remove OSD size from settings, take available OSD size

Added by HelAu about 11 years ago. Updated about 11 years ago.

Status:
New
Priority:
Normal
Assignee:
etobi
Target version:
-
Start date:
11/11/2013
Due date:
% Done:

0%

Estimated time:

Description

Hi
OSDTeletext fails without any notice if osdteletext size+height in setup.conf is higher than availabble OSD size.
These two settings should be taken from available osd size, not set up separately.

Actions
Copy link
 #1

Updated by urig about 11 years ago

OSD sizes should be more fail safe, agreed.

The reason why there are separate settings for OSD size in osdteletext is because OSD memory on old 'full featured' DVB-S cards was that limited, that an usual full OSD size only allowed 2bit/pixel, while a slightly smaller OSD allowed 3 bit/pixel, and in very small sizes, even 4 bit/pixel as needed to support all basic colors. The VDR OSD combined several regions with mixed bit depths down to 1bit/pixel in the main menu area, allowing more colors to be used. But since teletext can have any color anywhere, these tricks don't work.

Actions
Copy link

Also available in: Atom PDF