merge: v4l-dvb

5 files changed, 96 insertions, 35 deletions

diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c
index fcba8944c..57c91838e 100644
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c
@@ -1360,6 +1360,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 	if (rc > 0) {
 		dev->chip_id = rc;
 		switch (rc) {
+		case CHIP_ID_EM2750:
+			em28xx_info("chip ID is em2750\n");
+			break;
 		case CHIP_ID_EM2820:
 			em28xx_info("chip ID is em2820\n");
 			break;
diff --git a/linux/drivers/media/video/em28xx/em28xx-core.c b/linux/drivers/media/video/em28xx/em28xx-core.c
index d3fc86b43..ef6830cd5 100644
--- a/linux/drivers/media/video/em28xx/em28xx-core.c
+++ b/linux/drivers/media/video/em28xx/em28xx-core.c
@@ -69,19 +69,29 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
 	int ret, byte;
 
 	if (dev->state & DEV_DISCONNECTED)
-		return(-ENODEV);
+		return -ENODEV;
+
+	if (len > URB_MAX_CTRL_SIZE)
+		return -EINVAL;
 
 	em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
 
 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
 			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			      0x0000, reg, buf, len, HZ);
+			      0x0000, reg, dev->urb_buf, len, HZ);
+	if (ret < 0) {
+		if (reg_debug)
+			printk(" failed!\n");
+		return ret;
+	}
+
+	if (len)
+		memcpy(buf, dev->urb_buf, len);
 
 	if (reg_debug) {
-		printk(ret < 0 ? " failed!\n" : "%02x values: ", ret);
+		printk("%02x values: ", ret);
 		for (byte = 0; byte < len; byte++)
 			printk(" %02x", (unsigned char)buf[byte]);
-
 		printk("\n");
 	}
 
@@ -104,14 +114,16 @@ int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg)
 
 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
 			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			      0x0000, reg, &val, 1, HZ);
+			      0x0000, reg, dev->urb_buf, 1, HZ);
+	if (ret < 0) {
+		printk(" failed!\n");
+		return ret;
+	}
 
-	if (reg_debug)
-		printk(ret < 0 ? " failed!\n" :
-				 "%02x\n", (unsigned char) val);
+	val = dev->urb_buf[0];
 
-	if (ret < 0)
-		return ret;
+	if (reg_debug)
+		printk("%02x\n", (unsigned char) val);
 
 	return val;
 }
@@ -130,19 +142,13 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 {
 	int ret;
 
-	/*usb_control_msg seems to expect a kmalloced buffer */
-	unsigned char *bufs;
-
 	if (dev->state & DEV_DISCONNECTED)
 		return -ENODEV;
 
-	if (len < 1)
+	if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
 		return -EINVAL;
 
-	bufs = kmalloc(len, GFP_KERNEL);
-
 	em28xx_regdbg("req=%02x reg=%02x:", req, reg);
-
 	if (reg_debug) {
 		int i;
 		for (i = 0; i < len; ++i)
@@ -150,16 +156,14 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 		printk("\n");
 	}
 
-	if (!bufs)
-		return -ENOMEM;
-	memcpy(bufs, buf, len);
+	memcpy(dev->urb_buf, buf, len);
 	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			      0x0000, reg, bufs, len, HZ);
+			      0x0000, reg, dev->urb_buf, len, HZ);
+
 	if (dev->wait_after_write)
 		msleep(dev->wait_after_write);
 
-	kfree(bufs);
 	return ret;
 }
 
@@ -292,11 +296,11 @@ static int em28xx_set_audio_source(struct em28xx *dev)
 	/* Sets AC97 mixer registers
 	   This is seems to be needed, even for non-ac97 configs
 	 */
-	ret = em28xx_write_ac97(dev, EM28XX_R14_VIDEO_AC97, video);
+	ret = em28xx_write_ac97(dev, AC97_VIDEO_VOL, video);
 	if (ret < 0)
 		return ret;
 
-	ret = em28xx_write_ac97(dev, EM28XX_R10_LINE_IN_AC97, line);
+	ret = em28xx_write_ac97(dev, AC97_LINEIN_VOL, line);
 
 	return ret;
 }
@@ -312,7 +316,7 @@ int em28xx_audio_analog_set(struct em28xx *dev)
 
 	/* Mute */
 	s[1] |= 0x80;
-	ret = em28xx_write_ac97(dev, EM28XX_R02_MASTER_AC97, s);
+	ret = em28xx_write_ac97(dev, AC97_MASTER_VOL, s);
 
 	if (ret < 0)
 		return ret;
@@ -334,7 +338,7 @@ int em28xx_audio_analog_set(struct em28xx *dev)
 	/* Unmute device */
 	if (!dev->mute)
 		s[1] &= ~0x80;
-	ret = em28xx_write_ac97(dev, EM28XX_R02_MASTER_AC97, s);
+	ret = em28xx_write_ac97(dev, AC97_MASTER_VOL, s);
 
 	return ret;
 }
diff --git a/linux/drivers/media/video/em28xx/em28xx-reg.h b/linux/drivers/media/video/em28xx/em28xx-reg.h
index 6e5757caa..491d66abe 100644
--- a/linux/drivers/media/video/em28xx/em28xx-reg.h
+++ b/linux/drivers/media/video/em28xx/em28xx-reg.h
@@ -78,11 +78,6 @@
 	   0x47  IR data
 	 */
 
-/* em202 registers */
-#define EM28XX_R02_MASTER_AC97	0x02
-#define EM28XX_R10_LINE_IN_AC97    0x10
-#define EM28XX_R14_VIDEO_AC97	0x14
-
 /* em2874 registers */
 #define EM2874_R50_IR_CONFIG    0x50
 #define EM2874_R51_IR           0x51
@@ -113,7 +108,60 @@
 enum em28xx_chip_id {
 	CHIP_ID_EM2820 = 18,
 	CHIP_ID_EM2840 = 20,
+	CHIP_ID_EM2750 = 33,
 	CHIP_ID_EM2860 = 34,
 	CHIP_ID_EM2883 = 36,
 	CHIP_ID_EM2874 = 65,
 };
+
+/*
+ * Registers used by em202 and other AC97 chips
+ */
+
+/* Standard AC97 registers */
+#define AC97_RESET               0x00
+#define AC97_MASTER_VOL          0x02
+#define AC97_LINE_LEVEL_VOL      0x04
+#define AC97_MASTER_MONO_VOL     0x06
+
+#define AC97_PC_BEEP_VOL         0x0a
+#define AC97_PHONE_VOL           0x0c
+#define AC97_MIC_VOL             0x0e
+#define AC97_LINEIN_VOL          0x10
+#define AC97_CD_VOL              0x12
+#define AC97_VIDEO_VOL           0x14
+#define AC97_AUX_VOL             0x16
+#define AC97_PCM_OUT_VOL         0x18
+#define AC97_RECORD_SELECT       0x1a
+#define AC97_RECORD_GAIN         0x1c
+#define AC97_GENERAL_PURPOSE     0x20
+#define AC97_3D_CTRL             0x22
+#define AC97_AUD_INT_AND_PAG     0x24
+#define AC97_POWER_DOWN_CTRL     0x26
+#define AC97_EXT_AUD_ID          0x28
+#define AC97_EXT_AUD_CTRL        0x2a
+
+/* Supported rate varies for each AC97 device
+   if write an unsupported value, it will return the closest one
+ */
+#define AC97_PCM_OUT_FRONT_SRATE 0x2c
+#define AC97_PCM_OUT_SURR_SRATE  0x2e
+#define AC97_PCM_OUT_LFE_SRATE   0x30
+#define AC97_PCM_IN_SRATE        0x32
+#define AC97_LFE_MASTER_VOL      0x36
+#define AC97_SURR_MASTER_VOL     0x38
+#define AC97_SPDIF_OUT_CTRL      0x3a
+
+#define AC97_VENDOR_ID1          0x7c
+#define AC97_VENDOR_ID2          0x7e
+
+/* EMP202 vendor registers */
+#define EM202_EXT_MODEM_CTRL     0x3e
+#define EM202_GPIO_CONF          0x4c
+#define EM202_GPIO_POLARITY      0x4e
+#define EM202_GPIO_STICKY        0x50
+#define EM202_GPIO_MASK          0x52
+#define EM202_GPIO_STATUS        0x54
+#define EM202_SPDIF_OUT_SEL      0x6a
+#define EM202_ANTIPOP            0x72
+#define EM202_EAPD_GPIO_ACCESS   0x74
diff --git a/linux/drivers/media/video/em28xx/em28xx-video.c b/linux/drivers/media/video/em28xx/em28xx-video.c
index 09886d567..625c9dea1 100644
--- a/linux/drivers/media/video/em28xx/em28xx-video.c
+++ b/linux/drivers/media/video/em28xx/em28xx-video.c
@@ -2034,8 +2034,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	errCode = em28xx_config(dev);
 	if (errCode) {
 		em28xx_errdev("error configuring device\n");
-		em28xx_devused &= ~(1<<dev->devno);
-		kfree(dev);
 		return -ENOMEM;
 	}
 
@@ -2172,7 +2170,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 fail_unreg:
 	em28xx_release_resources(dev);
 	mutex_unlock(&dev->lock);
-	kfree(dev);
 	return retval;
 }
 
@@ -2333,8 +2330,12 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 
 	/* allocate device struct */
 	retval = em28xx_init_dev(&dev, udev, nr);
-	if (retval)
+	if (retval) {
+		em28xx_devused &= ~(1<<dev->devno);
+		kfree(dev);
+
 		return retval;
+	}
 
 	em28xx_info("Found %s\n", em28xx_boards[dev->model].name);
 
diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h
index 97afac4b6..2e108be19 100644
--- a/linux/drivers/media/video/em28xx/em28xx.h
+++ b/linux/drivers/media/video/em28xx/em28xx.h
@@ -104,6 +104,9 @@
 #define EM28XX_MIN_BUF 4
 #define EM28XX_DEF_BUF 8
 
+/*Limits the max URB message size */
+#define URB_MAX_CTRL_SIZE 80
+
 /* Params for validated field */
 #define EM28XX_BOARD_NOT_VALIDATED 1
 #define EM28XX_BOARD_VALIDATED	   0
@@ -468,6 +471,8 @@ struct em28xx {
 	unsigned int *alt_max_pkt_size;	/* array of wMaxPacketSize */
 	struct urb *urb[EM28XX_NUM_BUFS];	/* urb for isoc transfers */
 	char *transfer_buffer[EM28XX_NUM_BUFS];	/* transfer buffers for isoc transfer */
+	char urb_buf[URB_MAX_CTRL_SIZE];	/* urb control msg buffer */
+
 	/* helper funcs that call usb_control_msg */
 	int (*em28xx_write_regs) (struct em28xx *dev, u16 reg,
 					char *buf, int len);