Added support for stv0299 back in

1 files changed, 129 insertions, 2 deletions

diff --git a/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 9fac18df1..49e26df5e 100644
--- a/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -26,6 +26,7 @@
 #include "dvb_net.h"
 #include "cx22700.h"
 #include "tda1004x.h"
+#include "stv0299.h"
 
 #include <linux/dvb/frontend.h>
 #include <linux/dvb/dmx.h>
@@ -1178,7 +1179,8 @@ static int philips_tdm1316l_pll_set(struct dvb_frontend* fe, struct dvb_frontend
 	tuner_buf[2] = 0xca;
 	tuner_buf[3] = (cp << 5) | (filter << 3) | band;
 
-	if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) return -EIO;
+	if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1)
+		return -EIO;
 
 	msleep(1);
 	return 0;
@@ -1202,10 +1204,135 @@ struct tda1004x_config philips_tdm1316l_config = {
 };
 
 
+static u8 alps_bsru6_inittab[] = {
+	0x01, 0x15,
+	0x02, 0x00,
+	0x03, 0x00,
+	0x04, 0x7d,		/* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+	0x05, 0x35,		/* I2CT = 0, SCLT = 1, SDAT = 1 */
+	0x06, 0x40,		/* DAC not used, set to high impendance mode */
+	0x07, 0x00,		/* DAC LSB */
+	0x08, 0x40,		/* DiSEqC off, LNB power on OP2/LOCK pin on */
+	0x09, 0x00,		/* FIFO */
+	0x0c, 0x51,		/* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+	0x0d, 0x82,		/* DC offset compensation = ON, beta_agc1 = 2 */
+	0x0e, 0x23,		/* alpha_tmg = 2, beta_tmg = 3 */
+	0x10, 0x3f,		// AGC2  0x3d
+	0x11, 0x84,
+	0x12, 0xb5,		// Lock detect: -64  Carrier freq detect:on
+	0x15, 0xc9,		// lock detector threshold
+	0x16, 0x00,
+	0x17, 0x00,
+	0x18, 0x00,
+	0x19, 0x00,
+	0x1a, 0x00,
+	0x1f, 0x50,
+	0x20, 0x00,
+	0x21, 0x00,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x28, 0x00,		// out imp: normal  out type: parallel FEC mode:0
+	0x29, 0x1e,		// 1/2 threshold
+	0x2a, 0x14,		// 2/3 threshold
+	0x2b, 0x0f,		// 3/4 threshold
+	0x2c, 0x09,		// 5/6 threshold
+	0x2d, 0x05,		// 7/8 threshold
+	0x2e, 0x01,
+	0x31, 0x1f,		// test all FECs
+	0x32, 0x19,		// viterbi and synchro search
+	0x33, 0xfc,		// rs control
+	0x34, 0x93,		// error control
+	0x0f, 0x52,
+	0xff, 0xff
+};
+
+static int alps_bsru6_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+
+	if (srate < 1500000) {
+		aclk = 0xb7;
+		bclk = 0x47;
+	} else if (srate < 3000000) {
+		aclk = 0xb7;
+		bclk = 0x4b;
+	} else if (srate < 7000000) {
+		aclk = 0xb7;
+		bclk = 0x4f;
+	} else if (srate < 14000000) {
+		aclk = 0xb7;
+		bclk = 0x53;
+	} else if (srate < 30000000) {
+		aclk = 0xb6;
+		bclk = 0x53;
+	} else if (srate < 45000000) {
+		aclk = 0xb4;
+		bclk = 0x51;
+	}
+
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+	stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+
+	return 0;
+}
+
+static int alps_bsru6_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+	struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv;
+	u8 buf[4];
+	u32 div;
+	struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
+
+	if ((params->frequency < 950000) || (params->frequency > 2150000))
+		return -EINVAL;
+
+	div = (params->frequency + (125 - 1)) / 125;	// round correctly
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+	buf[3] = 0xC4;
+
+	if (params->frequency > 1530000)
+		buf[3] = 0xc0;
+
+	if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1)
+		return -EIO;
+
+	return 0;
+}
+
+static struct stv0299_config alps_bsru6_config = {
+
+	.demod_address = 0x68,
+	.inittab = alps_bsru6_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.enhanced_tuning = 0,
+	.skip_reinit = 0,
+	.lock_output = STV0229_LOCKOUTPUT_1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = alps_bsru6_set_symbol_rate,
+	.pll_set = alps_bsru6_pll_set,
+};
+
+
+
 
 static void frontend_init(struct ttusb* ttusb)
 {
 	switch(ttusb->dev->descriptor.idProduct) {
+	case 0x1003: // Hauppauge/TT Nova-USB-S budget (stv0299/ALPS BSRU6(tsa5059)
+		// try the ALPS BSRU6 first
+		ttusb->fe = stv0299_attach(&alps_bsru6_config, &ttusb->i2c_adap);
+		if (ttusb->fe != NULL) break;
+
+		break;
+
 	case 0x1005: // Hauppauge/TT Nova-USB-t budget (tda10046/Philips td1316(tda6651tt) OR cx22700/ALPS TDMB7(??))
 		// try the ALPS TDMB7 first
 		ttusb->fe = cx22700_attach(&alps_tdmb7_config, &ttusb->i2c_adap);
@@ -1384,7 +1511,7 @@ static void ttusb_disconnect(struct usb_interface *intf)
 }
 
 static struct usb_device_id ttusb_table[] = {
-/*	{USB_DEVICE(0xb48, 0x1003)},UNDEFINED HARDWARE - mail linuxtv.org list */
+	{USB_DEVICE(0xb48, 0x1003)},
 /*	{USB_DEVICE(0xb48, 0x1004)},UNDEFINED HARDWARE - mail linuxtv.org list*/	/* to be confirmed ????  */
 	{USB_DEVICE(0xb48, 0x1005)},
 	{}